Revision 0:8a66b7a8a366, committed 2017-05-20

Comitter:

Enenkel

Date:

Sat May 20 07:57:54 2017 +0000

Commit message:

HIMINI TEST des Bordes mit mit Testboard von GOM Common +3V3 !

Changed in this revision

diff -r 000000000000 -r 8a66b7a8a366 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sat May 20 07:57:54 2017 +0000
@@ -0,0 +1,144 @@
+/*  HIMINI - TESTSOFTWARE  
+by Enenkel
+20.5.17 V1.0      für COMMON PLUS !
+Wenn die HIMINI als USB Stick geschalten ist
+leuchten die LED P0_2 und P0_6
+*/
+
+#include "mbed.h"
+// Alle IO als DigitalOut definiert ! 
+//Alle von +3V3 gegen GND angesprochen (OD)
+DigitalOut P25(P2_5);
+DigitalOut P020(P0_20);
+DigitalOut P02(P0_2);  //Pin 6 === ACHTUNG für FTDI reserviert !
+DigitalOut P22(P2_2);
+DigitalOut P120(P1_20);
+DigitalOut P04(P0_4);
+DigitalOut P05(P0_5);
+DigitalOut P021(P0_21);
+DigitalOut P123(P1_23);
+DigitalOut P27(P2_7);
+DigitalOut P124(P1_24);
+DigitalOut P06(P0_6);
+DigitalOut P07(P0_7);
+DigitalOut P121(P1_21);
+DigitalOut P08(P0_8);
+DigitalOut P09(P0_9);
+DigitalOut P010(P0_10);   //Pin20
+// 2. Seite des HIMINI !
+DigitalOut P023(P0_23);   //Pin21
+DigitalOut P011(P0_11);
+DigitalOut P012(P0_12);
+DigitalOut P013(P0_13);
+DigitalOut P014(P0_14);   //Pin25 auf d. PCB
+DigitalOut P015(P0_15);
+DigitalOut P016(P0_16);
+DigitalOut P022(P0_22);
+DigitalOut P017(P0_17);
+DigitalOut P113(P1_13);   //Pin30
+
+int a;                    
+void lauflicht();
+void allOn();
+void laufli_inv();
+// **************************  Main ************************************
+int main() {
+    wait (3);   //ALLE Led sollten leuchten !
+    while(1) {
+        lauflicht();
+        allOn();
+        laufli_inv();
+    }
+}
+
+void lauflicht() {
+     //Alle LED AUS !    
+     P25=P020=P02=P22=P120=P04=P05=P021=1;
+     P123=P27=P124=P06=P07=P121=1;
+     P08=P09=P010=1;
+       //2.Seite
+     P023=P011=P012=P013=P014=P015=1;
+     P016=P022=P017=P113=1;
+     wait(3);
+     // jewils nur eine Diode leuchtet
+     P25=0;  wait(1); P25=1;
+     P020=0; wait(1); P020=1;
+     P02=0;  wait(1); P02=1;
+     P22=0;  wait(1); P22=1;
+     P120=0; wait(1); P120=1;
+     P04=0;  wait(1); P04=1;
+     P05=0;  wait(1); P05=1;
+     P021=0; wait(1); P021=1; 
+     P123=0; wait(1); P123=1;
+     P27=0; wait(1);  P27=1;
+     P124=0;wait(1);  P124=1;
+     P06=0; wait(1);  P06=1;
+     P07=0; wait(1);  P07=1;
+     P121=0;wait(1);  P121=1;
+     P08=0; wait(1);  P08=1;
+     P09=0; wait(1);  P09=1;
+     P010=0;wait(1);  P010=1;
+     //2. Seite
+     P023=0;wait(1);  P023=1;
+     P011=0;wait(1);  P011=1;
+     P012=0;wait(1);  P012=1;
+     P013=0;wait(1);  P013=1;
+     P014=0;wait(1);  P014=1;
+     P015=0;wait(1);  P015=1;
+     P016=0;wait(1);  P016=1;    
+     P022=0;wait(1);  P022=1;
+     P017=0;wait(1);  P017=1;
+     P113=0;wait(1);  P113=1;
+    }
+
+void allOn(){
+     // All LED ON
+     P25=P020=P02=P22=P120=P04=P05=P021=0;
+     P123=P27=P124=P06=P07=P121=0;
+     P08=P09=P010=0;
+      //2.Seite
+     P023=P011=P012=P013=P014=P015=0;
+     P016=P022=P017=P113=0;
+     wait(1);
+    }
+
+void laufli_inv() {
+     // all on 
+     P25=P020=P02=P22=P120=P04=P05=P021=0;
+     P123=P27=P124=P06=P07=P121=0;
+     P08=P09=P010=0;
+      //2.Seite
+     P023=P011=P012=P013=P014=P015=0;
+     P016=P022=P017=P113=0;
+     wait(3);
+     // Immer NUR eine LED OFF
+     P25=1;  wait(1); P25=0;
+     P020=1; wait(1); P020=0;
+     P02=1;  wait(1); P02=0;
+     P22=1;  wait(1); P22=0;
+     P120=1; wait(1); P120=0;
+     P04=1;  wait(1); P04=0;
+     P05=1;  wait(1); P05=0;
+     P021=1; wait(1); P021=0; 
+     P123=1; wait(1); P123=0;
+     P27=1; wait(1);  P27=0;
+     P124=1;wait(1);  P124=0;
+     P06=1; wait(1);  P06=0;
+     P07=1; wait(1);  P07=0;
+     P121=1;wait(1);  P121=0;
+     P08=1; wait(1);  P08=0;
+     P09=1; wait(1);  P09=0;
+     P010=1;wait(1);  P010=0;
+     //2. Seite
+     P023=1;wait(1);  P023=0;
+     P011=1;wait(1);  P011=0;
+     P012=1;wait(1);  P012=0;
+     P013=1;wait(1);  P013=0;
+     P014=1;wait(1);  P014=0;
+     P015=1;wait(1);  P015=0;
+     P016=1;wait(1);  P016=0;    
+     P022=1;wait(1);  P022=0;
+     P017=1;wait(1);  P017=0;
+     P113=1;wait(1);  P113=0;
+     wait (2);
+    }
\ No newline at end of file

diff -r 000000000000 -r 8a66b7a8a366 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sat May 20 07:57:54 2017 +0000
@@ -0,0 +1,1 @@
+https://mbed.org/users/mbed_official/code/mbed/builds/4eea097334d6
\ No newline at end of file