File content as of revision 2:798925c9e4a8:

/* mbed Microcontroller Library
 * Copyright (c) 2013 Nordic Semiconductor
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

typedef enum {
    p0  = 0,
    p1  = 1,
    p2  = 2,
    p3  = 3,
    p4  = 4,
    p5  = 5,
    p6  = 6,
    p7  = 7,
    p8  = 8,
    p9  = 9,
    p10 = 10,
    p11 = 11,
    p12 = 12,
    p13 = 13,
    p14 = 14,
    p15 = 15,
    p16 = 16,
    p17 = 17,
    p18 = 18,
    p19 = 19,
    p20 = 20,
    p21 = 21,
    p22 = 22,
    p23 = 23,
    p24 = 24,
    p25 = 25,
    p26 = 26,
    p27 = 27,
    p28 = 28,
    p29 = 29,
    p30 = 30,

    P0_0  = p0,
    P0_1  = p1,
    P0_2  = p2,
    P0_3  = p3,
    P0_4  = p4,
    P0_5  = p5,
    P0_6  = p6,
    P0_7  = p7,

    P0_8  = p8,
    P0_9  = p9,
    P0_10 = p10,
    P0_11 = p11,
    P0_12 = p12,
    P0_13 = p13,
    P0_14 = p14,
    P0_15 = p15,

    P0_16 = p16,
    P0_17 = p17,
    P0_18 = p18,
    P0_19 = p19,
    P0_20 = p20,
    P0_21 = p21,
    P0_22 = p22,
    P0_23 = p23,

    P0_24 = p24,
    P0_25 = p25,
    P0_26 = p26,
    P0_27 = p27,
    P0_28 = p28,
    P0_29 = p29,
    P0_30 = p30,

    LED1  = p18,
    LED2  = p19,
    LED3  = p18,
    LED4  = p19,

    BUTTON1 = p16,
    BUTTON2 = p17,

    RX_PIN_NUMBER = p11,
    TX_PIN_NUMBER = p9,
    CTS_PIN_NUMBER = 31, // unused
    RTS_PIN_NUMBER = 31, // unused

    // mbed interface pins
    USBTX = TX_PIN_NUMBER,
    USBRX = RX_PIN_NUMBER,

    SPI_PSELMOSI0 = p20,
    SPI_PSELMISO0 = p22,
    SPI_PSELSS0 = p24,
    SPI_PSELSCK0 = p25,

    SPI_PSELMOSI1 = p12,
    SPI_PSELMISO1 = p13,
    SPI_PSELSS1 = p14,
    SPI_PSELSCK1 = p15,

    SPIS_PSELMOSI = p12,
    SPIS_PSELMISO = p13,
    SPIS_PSELSS = p14,
    SPIS_PSELSCK = p15,

    LED_CONNECT = P0_18,
    LED_MODE = P0_19,
    OUT_LOW= P0_20,
    SW1 = P0_16,
    SW2 = P0_17,

    R_PWM = P0_28,
    R_IN1 = P0_30,
    R_IN2 = P0_0,
    L_PWM = P0_29,
    L_IN1 = P0_23,
    L_IN2 = P0_24,

    MMC_SCK = P0_15,
    MMC_CS = P0_14,
    MMC_SDO = P0_13,
    MMC_SDI = P0_12,

    R_ENC1 = P0_8,
    R_ENC2 = P0_10,
    L_ENC1 = P0_6,
    L_ENC2 = P0_7,

    P1IN = P0_2,
    P2IN = P0_3,
    P3IN = P0_4,
    P4IN = P0_5,

    I2C_SCL = P0_21,
    I2C_SDA = P0_22,

    I2C_SCL0 = P0_21, //required definition for the i2c patch
    I2C_SDA0 = P0_22, //required definition for the i2c patch

    // Not connected
    NC = (int)0xFFFFFFFF

} PinName;

typedef enum {
    PullNone = 0,
    PullDown = 1,
    PullUp = 3,
    PullDefault = PullUp
} PinMode;

#ifdef __cplusplus
}
#endif

#endif