ServiceDiscovery.h

00001 /* mbed Microcontroller Library
00002  * Copyright (c) 2006-2013 ARM Limited
00003  *
00004  * Licensed under the Apache License, Version 2.0 (the "License");
00005  * you may not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  *     http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an "AS IS" BASIS,
00012  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 
00017 #ifndef MBED_BLE_SERVICE_DISOVERY_H__
00018 #define MBED_BLE_SERVICE_DISOVERY_H__
00019 
00020 #include "UUID.h "
00021 #include "Gap.h"
00022 #include "GattAttribute.h"
00023 
00024 class DiscoveredService;
00025 class DiscoveredCharacteristic;
00026 
00027 /**
00028  * @addtogroup ble
00029  * @{
00030  * @addtogroup gatt
00031  * @{
00032  * @addtogroup client
00033  * @{
00034  */
00035 
00036 /**
00037  * Host callback types needed by the service discovery procedure.
00038  *
00039  * This class is also an interface that may be used in vendor port to model
00040  * the service discovery process. This interface is not used in user code.
00041  *
00042  * @attention Implementing this interface is not a requirement for the
00043  * implementation of the service discover process.
00044  */
00045 class ServiceDiscovery {
00046 public:
00047     /**
00048      * Service discovered event handler.
00049      *
00050      * The callback accepts a pointer to a DiscoveredService as parameter.
00051      *
00052      * @attention The argument passed to the callback may not persist after the
00053      * callback invocation; therefore, the callbacks must make a shallow copy
00054      * of the DiscoveredService passed as parameter to access its value beyond
00055      * the callback scope.
00056      */
00057     typedef FunctionPointerWithContext<const DiscoveredService *> 
00058         ServiceCallback_t;
00059 
00060     /**
00061      * Characteristic discovered event handler.
00062      *
00063      * The callback accepts a pointer to a DiscoveredCharacteristic as
00064      * parameter.
00065      *
00066      * @attention The argument passed to the callback may not persist after the
00067      * callback invocation; therefore, the callbacks must make a shallow copy
00068      * of the DiscoveredCharacteristic passed as parameter to access its value
00069      * beyond the callback scope.
00070      */
00071     typedef FunctionPointerWithContext<const DiscoveredCharacteristic *> 
00072         CharacteristicCallback_t;
00073 
00074     /**
00075      * Service discovery ended event.
00076      *
00077      * The callback accepts a connection handle as parameter. This
00078      * parameter is used to identify on which connection the service discovery
00079      * process ended.
00080      */
00081     typedef FunctionPointerWithContext<Gap::Handle_t>  TerminationCallback_t;
00082 
00083 public:
00084     /**
00085      * Launch service discovery. Once launched, service discovery remains
00086      * active with callbacks being issued back into the application for matching
00087      * services or characteristics. isActive() can be used to determine status, and
00088      * a termination callback (if set up) is invoked at the end. Service
00089      * discovery can be terminated prematurely, if needed, using terminate().
00090      *
00091      * @param  connectionHandle
00092      *           Handle for the connection with the peer.
00093      * @param  sc
00094      *           This is the application callback for a matching service. Taken as
00095      *           NULL by default. Note: service discovery may still be active
00096      *           when this callback is issued; calling asynchronous BLE-stack
00097      *           APIs from within this application callback might cause the
00098      *           stack to abort service discovery. If this becomes an issue, it
00099      *           may be better to make a local copy of the discoveredService and
00100      *           wait for service discovery to terminate before operating on the
00101      *           service.
00102      * @param  cc
00103      *           This is the application callback for a matching characteristic.
00104      *           Taken as NULL by default. Note: service discovery may still be
00105      *           active when this callback is issued; calling asynchronous
00106      *           BLE-stack APIs from within this application callback might cause
00107      *           the stack to abort service discovery. If this becomes an issue,
00108      *           it may be better to make a local copy of the discoveredCharacteristic
00109      *           and wait for service discovery to terminate before operating on the
00110      *           characteristic.
00111      * @param  matchingServiceUUID
00112      *           UUID-based filter for specifying a service in which the application is
00113      *           interested. By default, it is set as the wildcard UUID_UNKNOWN,
00114      *           in which case it matches all services. If characteristic-UUID
00115      *           filter (below) is set to the wildcard value, then a service
00116      *           callback is invoked for the matching service (or for every
00117      *           service if the service filter is a wildcard).
00118      * @param  matchingCharacteristicUUIDIn
00119      *           UUID-based filter for specifying a characteristic in which the application
00120      *           is interested. By default, it is set as the wildcard UUID_UKNOWN
00121      *           to match against any characteristic. If both service-UUID
00122      *           filter and characteristic-UUID filter are used with nonwildcard
00123      *           values, then only a single characteristic callback is
00124      *           invoked for the matching characteristic.
00125      *
00126      * @note     Using wildcard values for both service-UUID and characteristic-
00127      *           UUID result in complete service discovery: callbacks being
00128      *           called for every service and characteristic.
00129      *
00130      * @note     Providing NULL for the characteristic callback results in
00131      *           characteristic discovery being skipped for each matching
00132      *           service. This allows for an inexpensive method to discover only
00133      *           services.
00134      *
00135      * @return
00136      *           BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
00137      */
00138     virtual ble_error_t launch(Gap::Handle_t             connectionHandle,
00139                                ServiceCallback_t          sc = NULL,
00140                                CharacteristicCallback_t   cc = NULL,
00141                                const UUID               &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
00142                                const UUID               &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) = 0;
00143 
00144     /**
00145      * Check whether service-discovery is currently active.
00146      */
00147     virtual bool        isActive(void) const = 0;
00148 
00149     /**
00150      * Terminate an ongoing service discovery. This should result in an
00151      * invocation of the TerminationCallback if service discovery is active.
00152      */
00153     virtual void        terminate(void) = 0;
00154 
00155     /**
00156      * Set up a callback to be invoked when service discovery is terminated.
00157      */
00158     virtual void        onTermination(TerminationCallback_t  callback) = 0;
00159 
00160     /**
00161      * Clear all ServiceDiscovery state of the associated object.
00162      *
00163      * This function is meant to be overridden in the platform-specific
00164      * subclass. Nevertheless, the subclass is only expected to reset its
00165      * state and not the data held in ServiceDiscovery members. This is
00166      * achieved by a call to ServiceDiscovery::reset() from the subclass'
00167      * reset() implementation.
00168      *
00169      * @return BLE_ERROR_NONE on success.
00170      */
00171     virtual ble_error_t reset(void) {
00172         connHandle                 = 0;
00173         matchingServiceUUID        = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN);
00174         serviceCallback            = NULL;
00175         matchingCharacteristicUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN);
00176         characteristicCallback     = NULL;
00177 
00178         return BLE_ERROR_NONE;
00179     }
00180 
00181 protected:
00182     /**
00183      * Connection handle as provided by the SoftDevice.
00184      */
00185     Gap::Handle_t            connHandle;
00186     /**
00187      * UUID-based filter that specifies the service that the application is
00188      * interested in.
00189      */
00190     UUID                     matchingServiceUUID;
00191     /**
00192      * The registered callback handle for when a matching service is found
00193      * during service-discovery.
00194      */
00195     ServiceCallback_t         serviceCallback;
00196     /**
00197      * UUID-based filter that specifies the characteristic that the
00198      * application is interested in.
00199      */
00200     UUID                     matchingCharacteristicUUID;
00201     /**
00202      * The registered callback handler for when a matching characteristic is
00203      * found during service-discovery.
00204      */
00205     CharacteristicCallback_t  characteristicCallback;
00206 };
00207 
00208 /**
00209  * @}
00210  * @}
00211  * @}
00212  */
00213 
00214 #endif /* ifndef MBED_BLE_SERVICE_DISOVERY_H__ */