Arrow / Mbed OS DAPLink Reset
Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers flash_blob.c Source File

flash_blob.c

00001 /**
00002  * @file    flash_blob.c
00003  * @brief   Flash algorithm for the lpc1114
00004  *
00005  * DAPLink Interface Firmware
00006  * Copyright (c) 2009-2019, ARM Limited, All Rights Reserved
00007  * SPDX-License-Identifier: Apache-2.0
00008  *
00009  * Licensed under the Apache License, Version 2.0 (the "License"); you may
00010  * not use this file except in compliance with the License.
00011  * You may obtain a copy of the License at
00012  *
00013  * http://www.apache.org/licenses/LICENSE-2.0
00014  *
00015  * Unless required by applicable law or agreed to in writing, software
00016  * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
00017  * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00018  * See the License for the specific language governing permissions and
00019  * limitations under the License.
00020  */
00021 
00022 #include "flash_blob.h"
00023 
00024 static const uint32_t LPC1114_FLM[] = {
00025     /*0x000*/ 0xE00ABE00, 0x062D780D, 0x24084068, 0xD3000040, 0x1E644058, 0x1C49D1FA, 0x2A001E52, 0x4770D1F2,
00026     /*0x020*/ 0x47700b00, 0x21004841, 0x22016301, 0x63416342, 0x6b416342, 0xd0fc07c9, 0x493c6382, 0x39402002,
00027     /*0x040*/ 0x20006008, 0x20004770, 0xb5f84770, 0x20324c38, 0x2500444c, 0x46222607, 0x4621c261, 0x4f353114,
00028     /*0x060*/ 0x91004620, 0x696047b8, 0xd10a2800, 0x46212034, 0x4831c161, 0x462060e0, 0x47b89900, 0x28006960,
00029     /*0x080*/ 0x2001d000, 0xb5f8bdf8, 0x0b044d29, 0x2032444d, 0x4629606c, 0x311460ac, 0x4e266028, 0x4628460f,
00030     /*0x0A0*/ 0x696847b0, 0xd10b2800, 0x2034606c, 0x602860ac, 0x60e84821, 0x46284639, 0x696847b0, 0xd0002800,
00031     /*0x0C0*/ 0xbdf82001, 0x4614b5f8, 0xd10e0006, 0x68206861, 0x184068e2, 0x188968a1, 0x69211840, 0x69611840,
00032     /*0x0E0*/ 0x69a11840, 0x42401840, 0x4d1161e0, 0x444d0b30, 0x60682132, 0x60a86029, 0x31144629, 0x46284f0d,
00033     /*0x100*/ 0x47b89100, 0x28006968, 0x606ed10e, 0x60ac2033, 0x20ff6028, 0x60e83001, 0x61284807, 0x99004628,
00034     /*0x120*/ 0x696847b8, 0xd0002800, 0xbdf82001, 0x40048040, 0x00000004, 0x1fff1ff1, 0x00002ee0, 0x00000000,
00035 };
00036 
00037 /**
00038 * List of start and size for each size of flash sector
00039 * The size will apply to all sectors between the listed address and the next address
00040 * in the list.
00041 * The last pair in the list will have sectors starting at that address and ending
00042 * at address start + size.
00043 */
00044 static const sector_info_t sectors_info[] = {
00045     {0, 4096},
00046  };
00047 
00048 static const program_target_t flash = {
00049     0x10000025, // Init
00050     0x10000047, // UnInit
00051     0x1000004B, // EraseChip
00052     0x10000087, // EraseSector
00053     0x100000C5, // ProgramPage
00054     0x0,        // Verify
00055     
00056     // RSB : base adreess is address of Execution Region PrgData in map file
00057     //       to access global/static data
00058     // RSP : Initial stack pointer
00059     {0x10000001, 0x10000020 + 0x00000120, 0x10001000 - 32}, // {breakpoint, RSB, RSP}
00060 
00061     0x10000200, // program_buffer
00062     0x10000000, // algo_start
00063     0x00000150, // algo_size
00064     LPC1114_FLM,// algo_blob
00065 
00066     256         // program_buffer_size
00067 };