Arrow / Mbed OS DAPLink Reset
Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers rtc.h Source File

rtc.h

00001 /* ---------------------------------------------------------------------------- */
00002 /*                  Atmel Microcontroller Software Support                      */
00003 /*                       SAM Software Package License                           */
00004 /* ---------------------------------------------------------------------------- */
00005 /* Copyright (c) %copyright_year%, Atmel Corporation                                        */
00006 /*                                                                              */
00007 /* All rights reserved.                                                         */
00008 /*                                                                              */
00009 /* Redistribution and use in source and binary forms, with or without           */
00010 /* modification, are permitted provided that the following condition is met:    */
00011 /*                                                                              */
00012 /* - Redistributions of source code must retain the above copyright notice,     */
00013 /* this list of conditions and the disclaimer below.                            */
00014 /*                                                                              */
00015 /* Atmel's name may not be used to endorse or promote products derived from     */
00016 /* this software without specific prior written permission.                     */
00017 /*                                                                              */
00018 /* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
00019 /* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
00020 /* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
00021 /* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
00022 /* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
00023 /* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
00024 /* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
00025 /* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
00026 /* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
00027 /* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
00028 /* ---------------------------------------------------------------------------- */
00029 
00030 #ifndef _SAM3U_RTC_INSTANCE_
00031 #define _SAM3U_RTC_INSTANCE_
00032 
00033 /* ========== Register definition for RTC peripheral ========== */
00034 #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
00035 #define REG_RTC_CR              (0x400E1260U) /**< \brief (RTC) Control Register */
00036 #define REG_RTC_MR              (0x400E1264U) /**< \brief (RTC) Mode Register */
00037 #define REG_RTC_TIMR            (0x400E1268U) /**< \brief (RTC) Time Register */
00038 #define REG_RTC_CALR            (0x400E126CU) /**< \brief (RTC) Calendar Register */
00039 #define REG_RTC_TIMALR          (0x400E1270U) /**< \brief (RTC) Time Alarm Register */
00040 #define REG_RTC_CALALR          (0x400E1274U) /**< \brief (RTC) Calendar Alarm Register */
00041 #define REG_RTC_SR              (0x400E1278U) /**< \brief (RTC) Status Register */
00042 #define REG_RTC_SCCR            (0x400E127CU) /**< \brief (RTC) Status Clear Command Register */
00043 #define REG_RTC_IER             (0x400E1280U) /**< \brief (RTC) Interrupt Enable Register */
00044 #define REG_RTC_IDR             (0x400E1284U) /**< \brief (RTC) Interrupt Disable Register */
00045 #define REG_RTC_IMR             (0x400E1288U) /**< \brief (RTC) Interrupt Mask Register */
00046 #define REG_RTC_VER             (0x400E128CU) /**< \brief (RTC) Valid Entry Register */
00047 #define REG_RTC_WPMR            (0x400E1344U) /**< \brief (RTC) Write Protect Mode Register */
00048 #else
00049 #define REG_RTC_CR     (*(RwReg*)0x400E1260U) /**< \brief (RTC) Control Register */
00050 #define REG_RTC_MR     (*(RwReg*)0x400E1264U) /**< \brief (RTC) Mode Register */
00051 #define REG_RTC_TIMR   (*(RwReg*)0x400E1268U) /**< \brief (RTC) Time Register */
00052 #define REG_RTC_CALR   (*(RwReg*)0x400E126CU) /**< \brief (RTC) Calendar Register */
00053 #define REG_RTC_TIMALR (*(RwReg*)0x400E1270U) /**< \brief (RTC) Time Alarm Register */
00054 #define REG_RTC_CALALR (*(RwReg*)0x400E1274U) /**< \brief (RTC) Calendar Alarm Register */
00055 #define REG_RTC_SR     (*(RoReg*)0x400E1278U) /**< \brief (RTC) Status Register */
00056 #define REG_RTC_SCCR   (*(WoReg*)0x400E127CU) /**< \brief (RTC) Status Clear Command Register */
00057 #define REG_RTC_IER    (*(WoReg*)0x400E1280U) /**< \brief (RTC) Interrupt Enable Register */
00058 #define REG_RTC_IDR    (*(WoReg*)0x400E1284U) /**< \brief (RTC) Interrupt Disable Register */
00059 #define REG_RTC_IMR    (*(RoReg*)0x400E1288U) /**< \brief (RTC) Interrupt Mask Register */
00060 #define REG_RTC_VER    (*(RoReg*)0x400E128CU) /**< \brief (RTC) Valid Entry Register */
00061 #define REG_RTC_WPMR   (*(RwReg*)0x400E1344U) /**< \brief (RTC) Write Protect Mode Register */
00062 #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
00063 
00064 #endif /* _SAM3U_RTC_INSTANCE_ */