main.cpp

00001 /**
00002 *   @file     main.cpp
00003 *   @brief    Main file for the CN0357-example project
00004 *   @author   Analog Devices Inc.
00005 *
00006 * For support please go to:
00007 * Github: https://github.com/analogdevicesinc/mbed-adi
00008 * Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
00009 * Product: www.analog.com/EVAL-CN0357-ARDZ
00010 * More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
00011 
00012 ********************************************************************************
00013 * Copyright 2016(c) Analog Devices, Inc.
00014 *
00015 * All rights reserved.
00016 *
00017 * Redistribution and use in source and binary forms, with or without
00018 * modification, are permitted provided that the following conditions are met:
00019 *  - Redistributions of source code must retain the above copyright
00020 *    notice, this list of conditions and the following disclaimer.
00021 *  - Redistributions in binary form must reproduce the above copyright
00022 *    notice, this list of conditions and the following disclaimer in
00023 *    the documentation and/or other materials provided with the
00024 *    distribution.
00025 *  - Neither the name of Analog Devices, Inc. nor the names of its
00026 *    contributors may be used to endorse or promote products derived
00027 *    from this software without specific prior written permission.
00028 *  - The use of this software may or may not infringe the patent rights
00029 *    of one or more patent holders.  This license does not release you
00030 *    from the requirement that you obtain separate licenses from these
00031 *    patent holders to use this software.
00032 *  - Use of the software either in source or binary form, must be run
00033 *    on or directly connected to an Analog Devices Inc. component.
00034 *
00035 * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
00036 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
00037 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
00038 * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
00039 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
00040 * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
00041 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00042 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00043 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00044 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00045 *
00046 ********************************************************************************/
00047 #include "mbed.h"
00048 #include "Thermocouple.h"
00049 #include "CN0391.h"
00050 
00051 Serial pc(SERIAL_TX, SERIAL_RX);
00052 
00053 int main()
00054 {
00055     pc.baud(115200);
00056     //Thermocouple *tcarray[4] = {new Thermocouple_Type_E, new Thermocouple_Type_E,new Thermocouple_Type_B,new Thermocouple_Type_B}
00057     CN0391 cn0391(D10);
00058     pc.printf("Reset the AD7124\r\n");
00059     cn0391.reset();
00060     wait_ms(500);
00061     pc.printf("Init the AD7124\r\n");
00062     cn0391.init();
00063     wait_ms(500);
00064     pc.printf("Done\r\n");
00065 
00066     cn0391.set_thermocouple_type(CN0391::CHANNEL_P1, new Thermocouple_Type_E);
00067     cn0391.set_thermocouple_type(CN0391::CHANNEL_P2, new Thermocouple_Type_B);
00068     cn0391.set_thermocouple_type(CN0391::CHANNEL_P3, new Thermocouple_Type_J);
00069     cn0391.set_thermocouple_type(CN0391::CHANNEL_P4, new Thermocouple_Type_S);
00070 
00071 
00072 
00073     pc.printf("Calibration current for channel 1: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P1));
00074     pc.printf("Calibration current for channel 2: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P2));
00075     pc.printf("Calibration current for channel 3: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P3));
00076     pc.printf("Calibration current for channel 4: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P4));
00077     while(1) {
00078         pc.printf("Thermocouple temperature channel 1: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P1));
00079         pc.printf("Thermocouple temperature channel 2: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P2));
00080         pc.printf("Thermocouple temperature channel 3: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P3));
00081         pc.printf("Thermocouple temperature channel 4: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P4));
00082 
00083         pc.printf("\r\n");
00084 
00085         wait_ms(1000);
00086     }
00087     return 0;
00088 }