Diff: README.txt

Revision:

1:260e834a8dc1

Parent:

0:4f174385050d

--- a/README.txt	Thu Sep 02 14:02:38 2021 +0000
+++ b/README.txt	Fri Sep 24 15:14:06 2021 +0100
@@ -1,45 +1,42 @@
 Evaluation Boards/Products Supported
 ------------------------------------ 
-EVAL-AD1234 (AD1234)
-EVAL-AD1256 (AD1256)
-<< add more here >>
- 
+EVAL-AD7768-1
+
 Overview
 --------
-These code files provide drivers to interface with AD1234 and communicate with 
-EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board 
-https://os.mbed.com/platforms/SDP_K1/. 
- 
-Product details: https://www.analog.com/en/products/ad1234.html
-Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html
- 
- 
+This is a IIO based firmware application to evalute the AD7768-1 device.
+This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/.
+Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications.
+
+Product details: https://www.analog.com/en/products/ad7768-1.html
+Product Evaluation board details: https://www.analog.com/en/design-center/reference-designs/circuits-from-the-lab/cn0540.html
+User Guide for this code: https://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0540
+Communication Protocol: SPI
+
+
 Hardware Setup
 --------------
-Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external 
-clock supply.
-Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled 
-controller board) using the SDP connector and screws.
+Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-CN0540-ARDZ board and USB cable.
+Plug in the EVAL-CN0540-ARDZ board on SDP-K1 board (or any other Mbed enabled controller board) 
 Connect SDP-K1 board to the PC using the USB cable.
- 
- 
+
+
 How to Get Started
 ------------------
 Open Mbed online compiler. https://ide.mbed.com/compiler
-Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1234/
-instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
-Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions 
-here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
-Open Tera Term (or alternative), select 9600 baud rate, and the applicable COM port to see the 
-list of options.
- 
-A detailed user guide on how to use SDP-K1 board on Mbed platform is available 
-here: https://wiki.analog.com/resources/tools-software/mbed
- 
- 
+Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD7768-1/
+instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.8/build-tools/importing-code.html
+Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed 
+instructions here: https://os.mbed.com/docs/mbed-os/v6.8/build-tools/getting-your-program-on-your-board.html
+Open Tera Term (or alternative), select 230400 baud rate, and the applicable COM 
+port to see the list of options.
+
+
 Notes
 -----
-If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
+If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v6.8/program-setup/windows-serial-driver.html
 A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.
- 
-            
\ No newline at end of file
+
+
+Copyright (c) 2021 Analog Devices, Inc.  All rights reserved.
+