Diff: README.txt

Revision:

1:f71de62b7179

Parent:

0:5ad86d8d396a

Child:

3:0dcba3253ec1

--- a/README.txt	Thu Jun 09 10:57:51 2022 +0530
+++ b/README.txt	Fri Jun 10 09:37:03 2022 +0530
@@ -4,6 +4,7 @@
 EVAL-AD4112SDZ
 EVAL-AD4114SDZ
 EVAL-AD4115SDZ
+EVAL-AD7172-2SDZ
 EVAL-AD7172-4SDZ
 EVAL-AD7173-8SDZ
 EVAL-AD7175-2SDZ
@@ -13,7 +14,7 @@
 
 Overview
 --------
-This is a IIO based firmware application to evalute the ADxxxx device.
+This is a IIO based firmware application to evalute the AD717x/AD411x device.
 This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/.
 Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications.
 
@@ -25,7 +26,7 @@
 
 Hardware Setup
 --------------
-Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-ADxxxx board and USB cable.
+Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD717x/AD411x board and USB cable.
 Plug in the EVAL-AD4111 board on SDP-K1 board (or any other Mbed enabled controller board) 
 using the SDP-120 or Arduino or PMOD on-board connector (refer software wiki page to identify suitable interface).
 Connect SDP-K1 board to the PC using the USB cable.