Diff: README.txt

Revision:

1:63c505e13da4

Parent:

0:0f4881f73ef9

Child:

5:f3d7cf95cd8f

--- a/README.txt	Tue Mar 24 14:42:35 2020 +0000
+++ b/README.txt	Mon Mar 30 16:52:24 2020 +0000
@@ -1,40 +1,37 @@
 Evaluation Boards/Products Supported
 ------------------------------------ 
-EVAL-AD1234 (AD1234)
-EVAL-AD1256 (AD1256)
-<< add more here >>
+EVAL-AD5770RSDZ
 
 Overview
 --------
-These code files provide drivers to interface with AD1234 and communicate with 
-EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board 
-https://os.mbed.com/platforms/SDP_K1/. 
+These code files provide the console application and device libraries to 
+interface with AD5770R product evaluation board. This code was developed and tested on SDP-K1 
+controller board: https://os.mbed.com/platforms/SDP_K1/
 
-Product details: https://www.analog.com/en/products/ad1234.html
-Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html
+Product details: https://www.analog.com/en/products/ad5770r.html
+Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5770R.html
+User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad5770r_mbed_support
+Communication Protocol: SPI
 
 
 Hardware Setup
 --------------
-Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external 
-clock supply.
-Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled 
-controller board) using the SDP connector and screws.
+Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD5770RSDZ
+USB cable.
+Plug in the EVAL-AD5770RSDZ board on SDP-K1 board (or any other Mbed enabled 
+controller board) using the SDP connector and screws. Assuming, default evalauation board jumper configuration, a 3.3V external power supply should be connected to AVDD on P6.
 Connect SDP-K1 board to the PC using the USB cable.
 
 
 How to Get Started
 ------------------
 Open Mbed online compiler. https://ide.mbed.com/compiler
-Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1234/
+Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD5770R/
 instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
-Compile code. Drag and drop binary into SDP-K1 controller board. instructions 
-here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
-Open Tera Term, select 9600 baud rate, and the applicable COM port to see the 
-list of options.
-
-A detailed user guide on how to use SDP-K1 board on Mbed platform is available 
-here: <<Mbed user guide>>
+Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed 
+instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
+Open Tera Term (or alternative), select 115200 baud rate, and the applicable COM 
+port to see the list of options.
 
 
 Notes
@@ -43,40 +40,5 @@
 A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.
 
 
-License
--------
-Copyright (c) 2019 Analog Devices, Inc.  All rights reserved.
- 
-Redistribution and use in source and binary forms, with or without modification, 
-are permitted provided that the following conditions are met:
-  - Redistributions of source code must retain the above copyright notice, 
-  this list of conditions and the following disclaimer.
-  - Redistributions in binary form must reproduce the above copyright notice, 
-  this list of conditions and the following disclaimer in the documentation 
-  and/or other materials provided with the distribution.  
-  - Modified versions of the software must be conspicuously marked as such.
-  - This software is licensed solely and exclusively for use with processors/products 
-  manufactured by or for Analog Devices, Inc.
-  - This software may not be combined or merged with other code in any manner 
-  that would cause the software to become subject to terms and conditions which 
-  differ from those listed here.
-  - Neither the name of Analog Devices, Inc. nor the names of its contributors 
-  may be used to endorse or promote products derived from this software without 
-  specific prior written permission.
-  - The use of this software may or may not infringe the patent rights of one or 
-  more patent holders.  This license does not release you from the requirement 
-  that you obtain separate licenses from these patent holders to use this software.
- 
-THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND 
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, 
-TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 
-NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
-INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES 
-(INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL 
-PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
-OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
-EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- 
-2019-01-10-7CBSD SLA
\ No newline at end of file
+Copyright (c) 2020 Analog Devices, Inc.  All rights reserved.
+