Example program for EVAL-AD568x and EVAL-AD569x.
Dependencies: adi_console_menu platform_drivers
EVAL-AD568x-AD569x
This nanoDAC+ Mbed support software can be used as a starting point for developing your own firmware that targets Analog Devices nanoDAC+ products in your own environment. The software is configurable for your exact product within the nanoDAC+ family. See the user-guide for full instructions.
README.txt@9:cce35eca2ab0, 2021-07-21 (annotated)
- Committer:
- Kjansen
- Date:
- Wed Jul 21 12:09:31 2021 +0100
- Revision:
- 9:cce35eca2ab0
- Parent:
- 6:503431ffc005
Code improvement for EVAL-AD568x-AD569x
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
malavikasaji | 0:f1411e4f731f | 1 | Evaluation Boards/Products Supported |
malavikasaji | 0:f1411e4f731f | 2 | ------------------------------------ |
ssmith73 | 2:2b66a61a5934 | 3 | EVAL-AD5671R (AD5671R) |
ssmith73 | 2:2b66a61a5934 | 4 | EVAL-AD5672R (AD5672R) |
mahphalke | 6:503431ffc005 | 5 | EVAL-AD567xR (AD5673R) |
ssmith73 | 2:2b66a61a5934 | 6 | EVAL-AD5674R (AD5674R) |
ssmith73 | 2:2b66a61a5934 | 7 | EVAL-AD5675R (AD5675R) |
ssmith73 | 2:2b66a61a5934 | 8 | EVAL-AD5676 (AD5676) |
ssmith73 | 2:2b66a61a5934 | 9 | EVAL-AD5676R (AD5676R) |
mahphalke | 6:503431ffc005 | 10 | EVAL-AD567xR (AD5677R) |
mahphalke | 6:503431ffc005 | 11 | EVAL-AD5679R (AD5679) |
ssmith73 | 2:2b66a61a5934 | 12 | EVAL-AD5679R (AD5679R) |
ssmith73 | 2:2b66a61a5934 | 13 | EVAL-AD5681R (AD5681R) |
ssmith73 | 2:2b66a61a5934 | 14 | EVAL-AD5682R (AD5682R) |
ssmith73 | 2:2b66a61a5934 | 15 | EVAL-AD5683R (AD5683R) |
ssmith73 | 2:2b66a61a5934 | 16 | EVAL-AD5683 (AD5683) |
ssmith73 | 2:2b66a61a5934 | 17 | EVAL-AD5684R (AD5684R) |
ssmith73 | 2:2b66a61a5934 | 18 | EVAL-AD5685R (AD5685R) |
ssmith73 | 2:2b66a61a5934 | 19 | EVAL-AD5686R (AD5686R) |
ssmith73 | 2:2b66a61a5934 | 20 | EVAL-AD5686 (AD5686) |
mahphalke | 6:503431ffc005 | 21 | EVAL-AD5686R (AD5687) |
mahphalke | 6:503431ffc005 | 22 | EVAL-AD5686R (AD5687R) |
ssmith73 | 2:2b66a61a5934 | 23 | EVAL-AD5691R (AD5691R) |
ssmith73 | 2:2b66a61a5934 | 24 | EVAL-AD5692R (AD5692R) |
ssmith73 | 2:2b66a61a5934 | 25 | EVAL-AD5693R (AD5693R) |
ssmith73 | 2:2b66a61a5934 | 26 | EVAL-AD5693 (AD5693) |
ssmith73 | 2:2b66a61a5934 | 27 | EVAL-AD5694 (AD5694) |
ssmith73 | 2:2b66a61a5934 | 28 | EVAL-AD5694R (AD5694R) |
ssmith73 | 2:2b66a61a5934 | 29 | EVAL-AD5695R (AD5695R) |
ssmith73 | 2:2b66a61a5934 | 30 | EVAL-AD5696R (AD5696R) |
ssmith73 | 2:2b66a61a5934 | 31 | EVAL-AD5696 (AD5696) |
mahphalke | 6:503431ffc005 | 32 | EVAL-AD5696R (AD5697R) |
ssmith73 | 2:2b66a61a5934 | 33 | |
malavikasaji | 0:f1411e4f731f | 34 | |
malavikasaji | 0:f1411e4f731f | 35 | Overview |
malavikasaji | 0:f1411e4f731f | 36 | -------- |
ssmith73 | 2:2b66a61a5934 | 37 | These code files provide drivers to interface with nanoDAC+ family of devices listed above and communicate with EVAL-AD56XX board. This code was developed and tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. |
malavikasaji | 0:f1411e4f731f | 38 | |
ssmith73 | 2:2b66a61a5934 | 39 | Product details: https://www.analog.com/en/products/ad5686.html |
ssmith73 | 2:2b66a61a5934 | 40 | Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5686R.html |
ssmith73 | 2:2b66a61a5934 | 41 | User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/nanodac-mbed |
mahphalke | 6:503431ffc005 | 42 | Communication Protocol: SPI/I2C |
malavikasaji | 0:f1411e4f731f | 43 | |
malavikasaji | 0:f1411e4f731f | 44 | |
malavikasaji | 0:f1411e4f731f | 45 | Hardware Setup |
malavikasaji | 0:f1411e4f731f | 46 | -------------- |
ssmith73 | 2:2b66a61a5934 | 47 | Required: SDP-K1 (or alternative MBED enabled controller board), EVAL-AD56XX, USB cable. |
mahphalke | 6:503431ffc005 | 48 | Plug in the EVAL-AD568x board on SDP-K1 board (or any other Mbed enabled controller board) using the SDP connector and screws. |
malavikasaji | 0:f1411e4f731f | 49 | Connect SDP-K1 board to the PC using the USB cable. |
malavikasaji | 0:f1411e4f731f | 50 | |
malavikasaji | 0:f1411e4f731f | 51 | |
malavikasaji | 0:f1411e4f731f | 52 | How to Get Started |
malavikasaji | 0:f1411e4f731f | 53 | ------------------ |
malavikasaji | 0:f1411e4f731f | 54 | Open Mbed online compiler. https://ide.mbed.com/compiler |
Kjansen |
9:cce35eca2ab0 | 55 | Import Code into compiler. Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.8/quick-start/build-with-the-online-compiler.html |
Kjansen |
9:cce35eca2ab0 | 56 | Compile code to generate binary file and then drag and drop binary into SDP-K1 controller board. Detailed instructions are here: |
Kjansen |
9:cce35eca2ab0 | 57 | https://os.mbed.com/docs/mbed-os/v6.8/build-tools/getting-your-program-on-your-board.html |
Kjansen |
9:cce35eca2ab0 | 58 | |
Kjansen |
9:cce35eca2ab0 | 59 | Refer project wiki page to find detailed guide on how to use firmware: |
Kjansen |
9:cce35eca2ab0 | 60 | https://wiki.analog.com/resources/tools-software/product-support-software/nanodac-mbed |
malavikasaji | 0:f1411e4f731f | 61 | |
malavikasaji | 0:f1411e4f731f | 62 | |
malavikasaji | 0:f1411e4f731f | 63 | Notes |
malavikasaji | 0:f1411e4f731f | 64 | ----- |
Kjansen |
9:cce35eca2ab0 | 65 | Refer this page for latest documentation on Mbed-OS: https://os.mbed.com/docs/mbed-os/v6.8/introduction/index.html |
malavikasaji | 0:f1411e4f731f | 66 | A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. |
malavikasaji | 0:f1411e4f731f | 67 | |
malavikasaji | 0:f1411e4f731f | 68 | |
Kjansen |
9:cce35eca2ab0 | 69 | Copyright (c) 2021 Analog Devices, Inc. All rights reserved. |