Example program for EVAL-AD568x and EVAL-AD569x.
Dependencies: adi_console_menu platform_drivers
EVAL-AD568x-AD569x
This nanoDAC+ Mbed support software can be used as a starting point for developing your own firmware that targets Analog Devices nanoDAC+ products in your own environment. The software is configurable for your exact product within the nanoDAC+ family. See the user-guide for full instructions.
Diff: README.txt
- Revision:
- 2:2b66a61a5934
- Parent:
- 0:f1411e4f731f
- Child:
- 6:503431ffc005
--- a/README.txt Wed Jun 12 19:42:10 2019 +0000 +++ b/README.txt Thu Jun 13 15:30:11 2019 +0000 @@ -1,20 +1,43 @@ Evaluation Boards/Products Supported ------------------------------------ -EVAL-AD5686 (AD5686) -EVAL-AD5696 (AD5696) -<< add more here >> +EVAL-AD5671R (AD5671R) +EVAL-AD5672R (AD5672R) +EVAL-AD5674R (AD5674R) +EVAL-AD5675R (AD5675R) +EVAL-AD5676 (AD5676) +EVAL-AD5676R (AD5676R) +EVAL-AD5679R (AD5679R) +EVAL-AD5681R (AD5681R) +EVAL-AD5682R (AD5682R) +EVAL-AD5683R (AD5683R) +EVAL-AD5683 (AD5683) +EVAL-AD5684R (AD5684R) +EVAL-AD5685R (AD5685R) +EVAL-AD5686R (AD5686R) +EVAL-AD5686 (AD5686) +EVAL-AD5691R (AD5691R) +EVAL-AD5692R (AD5692R) +EVAL-AD5693R (AD5693R) +EVAL-AD5693 (AD5693) +EVAL-AD5694 (AD5694) +EVAL-AD5694R (AD5694R) +EVAL-AD5695R (AD5695R) +EVAL-AD5696R (AD5696R) +EVAL-AD5696 (AD5696) + Overview -------- -These code files provide drivers to interface with AD5940 and communicate with EVAL-AD5940 board. This code was developed and tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. +These code files provide drivers to interface with nanoDAC+ family of devices listed above and communicate with EVAL-AD56XX board. This code was developed and tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. -Product details: https://www.analog.com/en/products/ad5940.html -Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5940BIOZ.html +Product details: https://www.analog.com/en/products/ad5686.html +Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5686R.html +User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/nanodac-mbed Hardware Setup -------------- -Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external clock supply. +Required: SDP-K1 (or alternative MBED enabled controller board), EVAL-AD56XX, USB cable. Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled controller board) using the SDP connector and screws. Connect SDP-K1 board to the PC using the USB cable. @@ -25,7 +48,7 @@ Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD568x-AD569x/ instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html Compile code. Drag and drop binary into SDP-K1 controller board. instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html -Open Tera Term, select 9600 baud rate, and the applicable COM port to see the list of options. +Open Tera Term (or alternative), select 51200 baud rate, and the applicable COM port to see the list of options. Notes