Revision 0:3c5e2cc8251b, committed 2019-02-22

Comitter:

chuanga

Date:

Fri Feb 22 13:13:10 2019 +0800

Commit message:

adding wifi example program for wise-1530 wifi module

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Jenkinsfile	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,90 @@
+properties ([[$class: 'ParametersDefinitionProperty', parameterDefinitions: [
+  [$class: 'StringParameterDefinition', name: 'mbed_os_revision', defaultValue: '', description: 'Revision of mbed-os to build. Use format "pull/PR-NUMBER/head" to access mbed-os PR']
+  ]]])
+
+if (params.mbed_os_revision == '') {
+  echo 'Use mbed OS revision from mbed-os.lib'
+} else {
+  echo "Use mbed OS revisiong ${params.mbed_os_revision}"
+  if (params.mbed_os_revision.matches('pull/\\d+/head')) {
+    echo "Revision is a Pull Request"
+  }
+}
+
+// List of targets with supported RF shields to compile
+def targets = [
+  "UBLOX_EVK_ODIN_W2": ["internal"],
+  "REALTEK_RTL8195AM": ["internal"],
+  "K64F": ["esp8266-driver"],
+  "NUCLEO_F429ZI": ["esp8266-driver"]
+  ]
+
+// Map toolchains to compilers
+def toolchains = [
+  ARM: "armcc",
+  GCC_ARM: "arm-none-eabi-gcc",
+  IAR: "IAR-linux"
+  ]
+
+// Supported RF shields
+def radioshields = [
+  "internal",
+  "esp8266-driver"
+  ]
+
+def stepsForParallel = [:]
+
+// Jenkins pipeline does not support map.each, we need to use oldschool for loop
+for (int i = 0; i < targets.size(); i++) {
+    for(int j = 0; j < toolchains.size(); j++) {
+        for(int k = 0; k < radioshields.size(); k++) {
+            def target = targets.keySet().asList().get(i)
+            def allowed_shields = targets.get(target)
+            def toolchain = toolchains.keySet().asList().get(j)
+            def compilerLabel = toolchains.get(toolchain)
+            def radioshield = radioshields.get(k)
+
+            def stepName = "${target} ${toolchain} ${radioshield}"
+            if(allowed_shields.contains(radioshield)) {
+              stepsForParallel[stepName] = buildStep(target, compilerLabel, toolchain, radioshield)
+            }
+        }
+    }
+}
+
+timestamps {
+  parallel stepsForParallel
+}
+
+def buildStep(target, compilerLabel, toolchain, radioShield) {
+  return {
+    stage ("${target}_${compilerLabel}_${radioShield}") {
+      node ("${compilerLabel}") {
+        deleteDir()
+        dir("mbed-os-example-wifi") {
+          checkout scm
+          def config_file = "mbed_app.json"
+
+          // Set mbed-os to revision received as parameter
+          execute ("mbed deploy --protocol ssh")
+          if (params.mbed_os_revision != '') {
+            dir ("mbed-os") {
+              if (params.mbed_os_revision.matches('pull/\\d+/head')) {
+                execute("git fetch origin ${params.mbed_os_revision}:PR")
+                execute("git checkout PR")
+              } else {
+                execute ("git checkout ${params.mbed_os_revision}")
+              }
+            }
+          }
+          execute("mbed new .")
+
+          execute ("mbed compile --build out/${target}_${toolchain}_${radioShield}/ -m ${target} -t ${toolchain} -c --app-config ${config_file}")
+        }
+        stash name: "${target}_${toolchain}_${radioShield}", includes: '**/mbed-os-example-wifi.bin'
+        archive '**/mbed-os-example-wifi.bin'
+        step([$class: 'WsCleanup'])
+      }
+    }
+  }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LICENSE	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "{}"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright {yyyy} {name of copyright owner}
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,131 @@
+# mbed-os-example-wifi #
+
+Wi-Fi example for Mbed OS
+
+## Getting started with the Wi-Fi API ##
+
+This is an example of a Wi-Fi application using the Wi-Fi and network socket APIs that [Mbed OS](https://github.com/ARMmbed/mbed-os) provides.
+
+The program brings up the Wi-Fi and the underlying network interface and uses it to scan available networks, connects to a network, prints interface and connection details and performs an HTTP operation.
+
+For more information about Wi-Fi APIs, please visit the [Mbed OS Wi-Fi](https://os.mbed.com/docs/latest/reference/wi-fi.html) documentation.
+
+### Supported hardware ###
+
+* All Mbed OS boards with build-in Wi-Fi module:
+    * [u-blox ODIN-W2](https://os.mbed.com/platforms/ublox-EVK-ODIN-W2/)
+    * [Realtek RTL8195AM](https://os.mbed.com/platforms/REALTEK-RTL8195AM/)
+    * [ST DISCO IOT board](https://os.mbed.com/platforms/ST-Discovery-L475E-IOT01A/) with integrated [ISM43362 WiFi Inventek module](https://github.com/ARMmbed/wifi-ism43362).
+    * [ST DISCO_F413ZH board](https://os.mbed.com/platforms/ST-Discovery-F413H/) with integrated [ISM43362 WiFi Inventek module](https://github.com/ARMmbed/wifi-ism43362).
+    * [Advantech WISE-1530](https://os.mbed.com/modules/advantech-wise-1530/)
+    * USI WM-BN-BM-22
+    * MxChip EMW3166
+* Boards with external WiFi shields.
+    * [NUCLEO-F401RE](https://os.mbed.com/platforms/ST-Nucleo-F401RE/) with [X-NUCLEO-IDW04A1](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw04a1.html) Wi-Fi expansion board using pins D8 and D2 _(of the Arduino connector)_.
+    * [NUCLEO-F401RE](https://os.mbed.com/platforms/ST-Nucleo-F401RE/) with [X-NUCLEO-IDW01M1](https://os.mbed.com/components/X-NUCLEO-IDW01M1/) Wi-Fi expansion board using pins PA_9 and PA_10 _(of the Morpho connector)_.
+    * [NUCLEO-F429ZI](https://os.mbed.com/platforms/ST-Nucleo-F429ZI/) with ESP8266-01 module using pins D1 and D0.
+    * [NUCLEO-L476RG](https://os.mbed.com/platforms/ST-Nucleo-L476RG/) with ESP8266-01 module using pins D8 and D2.
+    * Other Mbed targets with an ESP8266 module, [X-NUCLEO-IDW04A1](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw04a1.html) or [X-NUCLEO-IDW01M1](https://os.mbed.com/components/X-NUCLEO-IDW01M1/) expansion board.
+
+#### Adding connectivity driver
+
+If the target does not have internal WiFi driver, or Mbed OS does not supply one, you need to add driver to your application and configure it to provide default WiFi interface.
+
+```
+mbed add <driver>
+```
+
+For example adding ISM43362 driver `mbed add wifi-ism43362` or ESP8266 `mbed add esp8266-driver` or X-Nucleo-IDW01M1 driver `mbed add wifi-x-nucleo-idw01m1`
+
+Then pin names need to be configured as instructed in the drivers README file.
+
+#### Connecting the ESP8266 ####
+
+To connect the ESP8266 module to your development board, look at the [ESP8266 Cookbook page](https://developer.mbed.org/users/4180_1/notebook/using-the-esp8266-with-the-mbed-lpc1768/). In general, this means hooking up the ESP8266 TX pin to `D0` and the ESP8266 RX pin to `D1` on your development board.
+
+**Note:** On NUCLEO development boards, pins `D0` and `D1` are used for serial communication with the computer. Use pins `D8` (to ESP8266 TX) and `D2` (to ESP8266 RX) instead.
+
+#### Connecting the X-NUCLEO-IDW0XX1 ####
+
+To connect the [X-NUCLEO-IDW04A1](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw04a1.html) or [X-NUCLEO-IDW01M1](https://developer.mbed.org/components/X-NUCLEO-IDW01M1/) expansion board to your NUCLEO development board, plug the expansion board on top of the NUCLEO board using the Arduino or Morpho connector.
+
+##  Getting started ##
+
+1. Import the example.
+
+   ```
+   git clone https://github.com/chuanga/mbed-os-example-wifi
+   cd mbed-os-example-wifi
+   ```
+
+2. Configure the Wi-Fi shield and settings.
+   Edit ```mbed_app.json``` to include the correct Wi-Fi shield, SSID and password:
+
+```json
+{
+    "config": {
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"PASSWORD\""
+        }
+    },
+    "target_overrides": {
+        "*": {
+            "platform.stdio-convert-newlines": true,
+            "esp8266.provide-default" : false
+        }
+    }
+}
+```
+
+   For build-in WiFi, you do not need to set any `provide-default` values. Those are required
+   if you use external WiFi shield.
+
+   Sample ```mbed_app.json``` files are provided for ESP8266 (```mbed_app_esp8266.json```), X-NUCLEO-IDW04A1 (```mbed_app_idw04a1.json```) and X-NUCLEO-IDW01M1 (```mbed_app_idw01m1```).
+
+
+1. Compile and generate binary.
+    For example, for `GCC`:
+    ```
+    mbed compile -t GCC_ARM -m UBLOX_EVK_ODIN_W2
+    ```
+
+2. Open a serial console session with the target platform using the following parameters:
+    * **Baud rate:** 9600
+    * **Data bits:** 8
+    * **Stop bits:** 1
+    * **Parity:** None
+
+3. Copy or drag the application `mbed-os-example-wifi.bin` in the folder `mbed-os-example-wifi/BUILD/<TARGET NAME>/<PLATFORM NAME>` onto the target board.
+
+4. The serial console should display a similar output to below, indicating a successful Wi-Fi connection:
+    ```
+    WiFi example
+
+    Scan:
+    Network: Dave Hot Spot secured: Unknown BSSID: 00:01:02:03:04:05 RSSI: -58 Ch: 1
+    1 network available.
+
+    Connecting...
+    Success
+
+    MAC: 00:01:02:03:04:05
+    IP: 192.168.0.5
+    Netmask: 255.255.255.0
+    Gateway: 192.168.0.1
+    RSSI: -27
+
+    Sending HTTP request to www.arm.com...
+    sent 38 [GET / HTTP/1.1]
+    recv 64 [HTTP/1.1 301 Moved Permanently]
+
+    Done
+    ```
+
+## Troubleshooting
+
+If you have problems, you can review the [documentation](https://os.mbed.com/docs/latest/tutorials/debugging.html) for suggestions on what could be wrong and how to fix it.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,167 @@
+/* WiFi Example
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "TCPSocket.h"
+
+WiFiInterface *wifi;
+
+const char *sec2str(nsapi_security_t sec)
+{
+    switch (sec) {
+        case NSAPI_SECURITY_NONE:
+            return "None";
+        case NSAPI_SECURITY_WEP:
+            return "WEP";
+        case NSAPI_SECURITY_WPA:
+            return "WPA";
+        case NSAPI_SECURITY_WPA2:
+            return "WPA2";
+        case NSAPI_SECURITY_WPA_WPA2:
+            return "WPA/WPA2";
+        case NSAPI_SECURITY_UNKNOWN:
+        default:
+            return "Unknown";
+    }
+}
+
+int scan_demo(WiFiInterface *wifi)
+{
+    WiFiAccessPoint *ap;
+
+    printf("Scan:\n");
+
+    int count = wifi->scan(NULL,0);
+
+    if (count <= 0) {
+        printf("scan() failed with return value: %d\n", count);
+        return 0;
+    }
+
+    /* Limit number of network arbitrary to 15 */
+    count = count < 15 ? count : 15;
+
+    ap = new WiFiAccessPoint[count];
+    count = wifi->scan(ap, count);
+
+    if (count <= 0) {
+        printf("scan() failed with return value: %d\n", count);
+        return 0;
+    }
+
+    for (int i = 0; i < count; i++) {
+        printf("Network: %s secured: %s BSSID: %hhX:%hhX:%hhX:%hhx:%hhx:%hhx RSSI: %hhd Ch: %hhd\n", ap[i].get_ssid(),
+               sec2str(ap[i].get_security()), ap[i].get_bssid()[0], ap[i].get_bssid()[1], ap[i].get_bssid()[2],
+               ap[i].get_bssid()[3], ap[i].get_bssid()[4], ap[i].get_bssid()[5], ap[i].get_rssi(), ap[i].get_channel());
+    }
+    printf("%d networks available.\n", count);
+
+    delete[] ap;
+    return count;
+}
+
+void http_demo(NetworkInterface *net)
+{
+    TCPSocket socket;
+    nsapi_error_t response;
+
+    printf("Sending HTTP request to www.arm.com...\n");
+
+    // Open a socket on the network interface, and create a TCP connection to www.arm.com
+    response = socket.open(net);
+    if(0 != response) {
+        printf("socket.open() failed: %d\n", response);
+        return;
+    }
+
+    response = socket.connect("api.ipify.org", 80);
+    if(0 != response) {
+        printf("Error connecting: %d\n", response);
+        socket.close();
+        return;
+    }
+
+    // Send a simple http request
+    char sbuffer[] = "GET / HTTP/1.1\r\nHost: api.ipify.org\r\nConnection: close\r\n\r\n";
+    nsapi_size_t size = strlen(sbuffer);
+
+    // Loop until whole request send
+    while(size) {
+        response = socket.send(sbuffer+response, size);
+        if (response < 0) {
+            printf("Error sending data: %d\n", response);
+            socket.close();
+            return;
+        }
+        size -= response;
+        printf("sent %d [%.*s]\n", response, strstr(sbuffer, "\r\n")-sbuffer, sbuffer);
+    }
+
+    // Receieve a simple http response and print out the response line
+    char rbuffer[64];
+    response = socket.recv(rbuffer, sizeof rbuffer);
+    if (response < 0) {
+        printf("Error receiving data: %d\n", response);
+    } else {
+        printf("recv %d [%.*s]\n", response, strstr(rbuffer, "\r\n")-rbuffer, rbuffer);
+    }
+
+    // Close the socket to return its memory and bring down the network interface
+    socket.close();
+}
+
+int main()
+{
+    int count = 0;
+
+    printf("WiFi example\n");
+
+#ifdef MBED_MAJOR_VERSION
+    printf("Mbed OS version %d.%d.%d\n\n", MBED_MAJOR_VERSION, MBED_MINOR_VERSION, MBED_PATCH_VERSION);
+#endif
+
+    wifi = WiFiInterface::get_default_instance();
+    if (!wifi) {
+        printf("ERROR: No WiFiInterface found.\n");
+        return -1;
+    }
+
+    count = scan_demo(wifi);
+    if (count == 0) {
+        printf("No WIFI APNs found - can't continue further.\n");
+        return -1;
+    }
+
+    printf("\nConnecting to %s...\n", MBED_CONF_APP_WIFI_SSID);
+    int ret = wifi->connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
+    if (ret != 0) {
+        printf("\nConnection error: %d\n", ret);
+        return -1;
+    }
+
+    printf("Success\n\n");
+    printf("MAC: %s\n", wifi->get_mac_address());
+    printf("IP: %s\n", wifi->get_ip_address());
+    printf("Netmask: %s\n", wifi->get_netmask());
+    printf("Gateway: %s\n", wifi->get_gateway());
+    printf("RSSI: %d\n\n", wifi->get_rssi());
+
+    http_demo(wifi);
+
+    wifi->disconnect();
+
+    printf("\nDone\n");
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#2fd0c5cfbd83fce62da6308f9d64c0ab64e1f0d6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,22 @@
+{
+    "config": {
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"WIFI_Password\""
+        }
+    },
+    "target_overrides": {
+        "*": {
+            "platform.stdio-convert-newlines": true
+        },
+	"MTB_ADV_WISE_1530": {
+            "platform.stdio-baud-rate"		: 115200, 
+	    "target.stdio_uart_tx"		: "PA_9",
+	    "target.stdio_uart_rx"		: "PA_10"
+	}
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app_esp8266.json	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,29 @@
+{
+    "config": {
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"PASSWORD\""
+        }
+    },
+    "target_overrides": {
+        "*": {
+            "platform.stdio-convert-newlines": true,
+            "esp8266.provide-default" : true
+        },
+        "UBLOX_EVK_ODIN_W2": {
+            "target.device_has": ["EMAC"]
+        },
+        "NUCLEO_L476RG": {
+            "wifi-tx": "D8",
+            "wifi-rx": "D2"
+        },
+        "NUCLEO_F401RE": {
+            "wifi-tx": "D8",
+            "wifi-rx": "D2"
+        }
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app_idw01m1.json	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,26 @@
+{
+    "config": {
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"PASSWORD\""
+        }
+    },
+    "target_overrides": {
+        "*": {
+            "platform.stdio-convert-newlines": true,
+            "idw0xx1.expansion-board": "IDW01M1",
+            "idw0xx1.provide-default": true,
+            "idw0xx1.tx": "PA_9",
+            "idw0xx1.rx": "PA_10",
+            "drivers.uart-serial-txbuf-size": 730,
+            "drivers.uart-serial-rxbuf-size": 730
+        },
+        "UBLOX_EVK_ODIN_W2": {
+            "target.device_has": ["EMAC"]
+        }
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app_idw04a1.json	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,31 @@
+{
+    "config": {
+	"wifi-shield": {
+            "help": "Options are internal, WIFI_ESP8266, WIFI_IDW0XX1",
+            "value": "WIFI_IDW0XX1"
+	},
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"PASSWORD\""
+        }
+    },
+    "target_overrides": {
+        "*": {
+            "platform.stdio-convert-newlines": true,
+            "idw0xx1.expansion-board": "IDW04A1",
+            "idw0xx1.provide-default": true, 
+            "idw0xx1.tx": "PA_9",
+            "idw0xx1.rx": "PA_10",
+	    "drivers.uart-serial-txbuf-size": 750,
+	    "drivers.uart-serial-rxbuf-size": 750
+        },
+	"UBLOX_EVK_ODIN_W2": {
+            "target.device_has": ["EMAC"]
+	}
+    },
+    "macros": ["IDW04A1_WIFI_HW_BUG_WA"]
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_settings.py	Fri Feb 22 13:13:10 2019 +0800
@@ -0,0 +1,45 @@
+"""
+mbed SDK
+Copyright (c) 2016 ARM Limited
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
+
+from os.path import join, abspath, dirname
+
+#ROOT = abspath(join(dirname(__file__), "."))
+
+##############################################################################
+# Build System Settings
+##############################################################################
+#BUILD_DIR = abspath(join(ROOT, "build"))
+
+# ARM
+#ARM_PATH = "C:/Program Files/ARM"
+
+# GCC ARM
+#GCC_ARM_PATH = ""
+
+# IAR
+#IAR_PATH = "C:/Program Files (x86)/IAR Systems/Embedded Workbench 7.0/arm"
+
+# Goanna static analyser. Please overload it in private_settings.py
+#GOANNA_PATH = "c:/Program Files (x86)/RedLizards/Goanna Central 3.2.3/bin"
+
+#BUILD_OPTIONS = []
+
+# mbed.org username
+#MBED_ORG_USER = ""
+
+# Print compiler warnings and errors as link format
+#PRINT_COMPILER_OUTPUT_AS_LINK = False

Binary file mbed_settings.pyc has changed