mbed Sensor node for Instrumented Booth over ETH.
Dependencies: EthernetInterface-1 MaxbotixDriver Presence HTU21D_TEMP_HUMID_SENSOR_SAMPLE Resources SHARPIR mbed-rtos mbed-src WDT_K64F nsdl_lib
Fork of Trenton_Switch_LPC1768_ETH by
node_cfg.h
- Committer:
- erigow01
- Date:
- 2014-12-11
- Revision:
- 32:c957a1948ac1
- Parent:
- 30:b74aa0729b07
- Child:
- 36:bb8c769065de
File content as of revision 32:c957a1948ac1:
#ifndef NODE_CFG_H_ #define NODE_CFG_H_ /************** NODE PROFILE SELECTION ***********************/ //Which Radio #define NODE_6LOWPAN 0 #define NODE_ETHERNET 1 //Which Sensors #define NODE_SENSOR_STATION 1 // use K64F platform. Base sensor platform. Includes Microphone, temperature. #define NODE_HEIGHT_STATION 1 // use K64F platform. This include door height sensor #define NODE_KIOSK_STATION 0 // use K64F platform. This includes kiosk presence sensor #define NODE_DOOR_TRIP_STATION 1 // use K64F platform. This includes door tripwire sensor #define NODE_PIR_STATION 0 // use K64F platform. This includes pir motion sensor /*************** NODE PROFILE CONFIGURATION *****************/ /** CES NODE DEFINITIONS **/ #if NODE_6LOWPAN //6LoWPAN Sensors... #define ENDPOINT_TYPE {"mbed-sensor-6LoWPAN"} //#define NODE_SHORT_ADDRESS 01 //mbed Meeting Room //#define NODE_NAME "mbed-sensor-mbed" //#define NODE_SHORT_ADDRESS 02 //Cortex Meeting Room //#define NODE_NAME "mbed-sensor-Cortex" //#define NODE_SHORT_ADDRESS 03 //Artisan Meeting Room //#define NODE_NAME "mbed-sensor-Artisan" //#define NODE_SHORT_ADDRESS 04 //Mali Meeting Room //#define NODE_NAME "mbed-sensor-Mali" //#define NODE_SHORT_ADDRESS 05 //Casual Seating Area 1 //#define NODE_NAME "mbed-sensor-Casual-1" //#define NODE_SHORT_ADDRESS 06 //Casual Seating Area 2 //#define NODE_NAME "mbed-sensor-Casual-2" //#define NODE_SHORT_ADDRESS 07 //Reception //#define NODE_NAME "mbed-sensor-Reception" #define GENERATE_MAC_ADDRESS(short) {0,0,6,0x02,0x00,0x00,0x09,0x ## short ## } #define NODE_MAC_ADDRESS GENERATE_MAC_ADDRESS(NODE_SHORT_ADDRESS) //{0,0,6,0x02,0x00,0x00,0x09,0x02} #else //Ethernet Sensors... #define ENDPOINT_TYPE {"mbed-sensor-Ethernet"} #define NODE_NAME "mbed-sensor-demo-door" //#define NODE_NAME "mbed-sensor-demo-1" //#define NODE_NAME "mbed-sensor-demo-2" //#define NODE_NAME "mbed-sensor-demo-3" //#define NODE_NAME "mbed-sensor-demo-4" #endif //Node comms Type #define LIFE_TIME {"600"} //seconds, extra char needed to avoid truncation // **************************************************************************** // Ethernet Config... #if NODE_ETHERNET // Ethernet configuration /* Define this to enable DHCP, otherwise manual address configuration is used */ #define DHCP /* Manual IP configurations, if DHCP not defined */ #define IP "192.168.1.10" #define MASK "255.255.255.0" #define GW "10.45.0.1" #endif //ETHERNET // **************************************************************************** /************** REGISTRATION PARAMETERS ************************/ #define RD_UPDATE_PERIOD_MS 300000 // 5 minutes #define NSP_IP_ADDRESS "192.168.1.100" //IPv4 #if NODE_6LOWPAN #define NSP_IP_ADDRESS_BYTES {0x20, 0x02, 0x0d, 0xb4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x02, 0x00, 0x01} //IPv6 #else // Not NODE_6LOWPAN //Default to IPv4 #define NSP_IP_ADDRESS_BYTES {0xc0, 0xa8, 0x01, 0x64} //IPv4 #endif // NODE_ETHERNET #endif // NODE_CFG_H_