Demo Team
mbed Sensor node for Instrumented Booth over ETH.
Dependencies: EthernetInterface-1 MaxbotixDriver Presence HTU21D_TEMP_HUMID_SENSOR_SAMPLE Resources SHARPIR mbed-rtos mbed-src WDT_K64F nsdl_lib
Fork of
Trenton_Switch_LPC1768_ETH
by 
Demo Team
Diff: node_cfg.h
- Revision:
- 26:4cac6b346e4f
- Child:
- 27:6017a643f386
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/node_cfg.h Wed Dec 03 15:39:09 2014 +0000
@@ -0,0 +1,45 @@
+#ifndef NODE_CFG_H_
+#define NODE_CFG_H_
+
+/************** NODE PROFILE SELECTION ***********************/
+#define NODE_SENSOR_STATION 1 // use K64F platform. Base sensor platform. Includes Microphone, temperature.
+#define NODE_HEIGHT_STATION 0 // use K64F platform. This include door height sensor
+#define NODE_KIOSK_STATION 1 // use K64F platform. This includes kiosk presence sensor
+#define NODE_DOOR_TRIP_STATION 0 // use K64F platform. This includes door tripwire sensor
+#define NODE_PIR_STATION 0 // use K64F platform. This includes pir motion sensor
+
+
+/*************** NODE PROFILE CONFIGURATION *****************/
+
+
+#define NODE_SHORT_ADDRESS 4
+#define NODE_MAC_ADDRESS {0,0,6,0x02,0x00,0x00,0x09,0x01}
+#define NODE_NAME "mbed-sensor-station-eth"
+
+
+#define ENDPOINT_TYPE {"mbed-device"}
+#define LIFE_TIME {"600"} //seconds, extra char needed to avoid truncation
+
+// ****************************************************************************
+// Ethernet Config...
+
+// Ethernet configuration
+/* Define this to enable DHCP, otherwise manual address configuration is used */
+#define DHCP
+
+/* Manual IP configurations, if DHCP not defined */
+#define IP "192.168.1.10"
+#define MASK "255.255.255.0"
+#define GW "10.45.0.1"
+
+// ****************************************************************************
+
+/************** REGISTRATION PARAMETERS ************************/
+#define RD_UPDATE_PERIOD 30000 // 30 seconds
+
+//#define NSP_IP_ADDRESS_BYTES {0x20, 0x02, 0x0d, 0xb4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x02, 0x00, 0x01} //IPv6
+
+#define NSP_IP_ADDRESS "192.168.1.100" //IPv4
+#define NSP_IP_ADDRESS_BYTES {0xc0, 0xa8, 0x01, 0x64} //IPv4
+
+#endif // NODE_CFG_H_
\ No newline at end of file