Revision 5:a5f30ff1f997, committed 2014-08-26

Comitter:

erigow01

Date:

Tue Aug 26 15:15:33 2014 +0000

Parent:

4:37a5586c4f64

Commit message:

WIZnet_Library modified to be usable as import.

Changed in this revision

--- a/WIZnetInterface/WIZnet/wiznet.h	Wed Aug 20 02:17:02 2014 +0000
+++ b/WIZnetInterface/WIZnet/wiznet.h	Tue Aug 26 15:15:33 2014 +0000
@@ -29,7 +29,7 @@
 #if defined(USE_W5500)
 #include "W5500.h"
 
-//#define USE_WIZ550IO_MAC    // using the MAC address stored in the WIZ550io
+#define USE_WIZ550IO_MAC    // using the MAC address stored in the WIZ550io
 
 #endif
 

--- a/main.cpp	Wed Aug 20 02:17:02 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/*
-*
-*  Test program for W5500 mbed Library
-
-*/
-#include "mbed.h"
-#include "WIZnetInterface.h"
-
-#define ECHO_SERVER_PORT   5000
-const char* ECHO_SERVER_ADDRESS = "192.168.1.229";  // Server IP address
-
-/** 
-* Setting DHCP or static
-*/
-//#define USE_DHCP
-
-/** 
-* Setting the platform to test
-*/
-#define LPC
-//#define ST_NUCLEO
-//#define FRDM_KL25Z
-//#define Seeeduino_Arch
-
-#ifdef LPC
-// LPC1768 & LPC11U24
-SPI spi(p5, p6, p7); // mosi, miso, sclk
-WIZnetInterface eth(&spi, p8, p9); // spi, cs, reset
-#endif
-
-#ifdef ST_NUCLEO
-// ST Nucleo
-SPI spi(PA_7, PA_6, PA_5); // mosi, miso, sclk
-WIZnetInterface eth(&spi, PB_6, PA_10); // spi, cs, reset
-#endif
-
-#ifdef FRDM_KL25Z
-// Freescale FRDM KL25Z
-SPI spi(PTD2, PTD3, PTD1); // mosi, miso, sclk
-WIZnetInterface eth(&spi, PTD0, PTA20); // spi, cs, reset
-#endif
-
-#ifdef Seeeduino_Arch
-// Seeedstudio Arch
-SPI spi(P1_22, P1_21, P1_20); // mosi, miso, sclk
-WIZnetInterface eth(&spi, P0_2, P0_0); // spi, cs, reset
-    Serial pc(P1_13, P1_14); // tx, rx
-#else
-    Serial pc(USBTX,USBRX);
-#endif
-
-#ifndef USE_DHCP
-// for static IP setting
-const char * IP_Addr    = "192.168.1.120";
-const char * IP_Subnet  = "255.255.255.0";
-const char * IP_Gateway = "192.168.1.111";
-#endif
-
-
-int main()
-{
-    uint8_t mac[6];
-    
-    mbed_mac_address((char *)mac);     // using the MAC address in LPC11U24 or LPC1178
-//    mac[0] = 0x00; mac[1] = 0x08; mac[2] = 0xDC; mac[3] = 0x00; mac[4] = 0x00; mac[5] = 0x00; 
-// you can alo use WIZ550io's MAC address by enabling "USE_WIZ550IO_MAC" in wiznet.h
-    
-    pc.printf("Start\n");
-    #ifdef USE_DHCP
-      int ret = eth.init(mac); //Use DHCP
-    #else
-      int ret = eth.init(mac, IP_Addr, IP_Subnet, IP_Gateway); // static
-    #endif
-
-    if (!ret) {
-        pc.printf("Initialized, MAC: %s\n", eth.getMACAddress());
-    } else {
-        pc.printf("Error eth.init() - ret = %d\n", ret);
-        return -1;
-    }
-
-    ret = eth.connect();
-    if (!ret) {
-        pc.printf("IP: %s, MASK: %s, GW: %s\n",
-                  eth.getIPAddress(), eth.getNetworkMask(), eth.getGateway());
-    } else {
-        pc.printf("Error eth.connect() - ret = %d\n", ret);
-        return -1;
-    }
-
-    TCPSocketServer server;
-    server.bind(ECHO_SERVER_PORT);
-    server.listen();
-
-    while (true) {
-        pc.printf("\nWait for new connection...\n");
-        TCPSocketConnection client;
-        server.accept(client);
-        //client.set_blocking(false, 1500); // Timeout after (1.5)s
-
-        pc.printf("Connection from: %s\n", client.get_address());
-        char buffer[256];
-        while (true) {
-            int n = client.receive(buffer, sizeof(buffer));
-            if (n <= 0) break;
-
-            client.send_all(buffer, n);
-            if (n <= 0) break;
-        }
-
-        client.close();
-    }
-}

--- a/mbed.bld	Wed Aug 20 02:17:02 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/8a40adfe8776
\ No newline at end of file