Demo Team / Mbed 2 deprecated Trenton_Doormat_FRDM-KL25Z_ETH

Fork of KL46Z Wifi version. Moved to KL25Z as umbrella stand now requires 2 SPIs, thus requires 46z.

Dependencies:   WIZnet_Library_ASE mbed nanoservice_client_1_12

Fork of Trenton_Doormat_FRDM-KL25Z_ETH by Eric Gowland

Diff: main.h

Revision:
6:6eaae34586b8
Parent:
5:12ea15b9c2f4
Child:
7:afaa17c11965
--- a/main.h	Thu Oct 03 21:26:22 2013 +0200
+++ b/main.h	Sun Oct 06 12:31:50 2013 +0200
@@ -1,56 +1,56 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MAIN_H
-#define MAIN_H
-
-#define WIGO           1
-#define WIFI_DIPCORTEX 2
-#define UNDEFINED      3
-
-#define MY_BOARD WIGO
-
-// use this defines in AP_SECURITY
-#define NONE 0
-#define WEP  1
-#define WPA  2
-#define WPA2 3
-
-// use smart config
-#define USE_SMART_CONFIG 0
-
- // Default SSID Settings
-#define AP_KEY       "zxcvbnm,./"
-#define AP_SECURITY  WPA2            // WPA2 must be enabled for use with iPhone or Android phone hotspot!
-#define SSID         "SSID"
-
-#define USE_DHCP      1
-#define USE_STATIC_IP 2
-
-// Modify the following settings as necessary for your Wi-Fi Network setup:
-#define IP_ALLOC_METHOD USE_DHCP        // for DHCP assigned IP address
-//#define IP_ALLOC_METHOD USE_STATIC_IP // for static IP address
-
-#define STATIC_IP_OCT1 192
-#define STATIC_IP_OCT2 168
-#define STATIC_IP_OCT3 0
-#define STATIC_IP_OCT4 103
-
-#define STATIC_GW_OCT4 1             // Static Gateway address  = STATIC_IP_OCT1.STATIC_IP_OCT2.STATIC_IP_OCT3.STATIC_GW_OCT4
-
-
-void init();
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MAIN_H
+#define MAIN_H
+
+#define WIGO           1
+#define WIFI_DIPCORTEX 2
+#define UNDEFINED      3
+
+#define MY_BOARD WIGO
+
+// use this defines in AP_SECURITY
+#define NONE 0
+#define WEP  1
+#define WPA  2
+#define WPA2 3
+
+// use smart config
+#define USE_SMART_CONFIG 0
+
+ // Default SSID Settings
+#define AP_KEY       "zxcvbnm,./"
+#define AP_SECURITY  WPA2            // WPA2 must be enabled for use with iPhone or Android phone hotspot!
+#define SSID         "SSID"
+
+#define USE_DHCP      1
+#define USE_STATIC_IP 2
+
+// Modify the following settings as necessary for your Wi-Fi Network setup:
+#define IP_ALLOC_METHOD USE_DHCP        // for DHCP assigned IP address
+//#define IP_ALLOC_METHOD USE_STATIC_IP // for static IP address
+
+#define STATIC_IP_OCT1 192
+#define STATIC_IP_OCT2 168
+#define STATIC_IP_OCT3 0
+#define STATIC_IP_OCT4 103
+
+#define STATIC_GW_OCT4 1             // Static Gateway address  = STATIC_IP_OCT1.STATIC_IP_OCT2.STATIC_IP_OCT3.STATIC_GW_OCT4
+
+
+void init();
+
+#endif