Diff: main.cpp

Revision:

1:6e31c704f4d6

Parent:

0:11dd239703cc

Child:

2:124a066878cc

--- a/main.cpp	Fri Feb 07 19:55:57 2014 +0000
+++ b/main.cpp	Mon Feb 10 16:33:35 2014 +0000
@@ -1,94 +1,21 @@
-#include "mbed.h"
+#include "main.h"
 
 InterruptIn signal(p15);
 Serial pc(USBTX,USBRX);
- 
-DigitalOut myled(LED1);
-DigitalOut myled2(LED2);
-volatile unsigned short timer_count, timer1_count;
- 
-extern "C" void TIMER0_IRQHandler (void)
-{
-if((LPC_TIM0->IR & 0x01) == 0x01)   // if MR0 interrupt, proceed
-    {
-    LPC_TIM0->IR |= 1 << 0;         // Clear MR0 interrupt flag
-    timer_count++;                  //increment timer_count
-   
-    // pc.printf("timer_count %d \n\r", timer_count);
-    if (timer_count >= 80)      //Set timer_count for about 8 seconds
-            {
-            if (myled == 1)             //If LED off, turn it on &
-                {
-                myled = 0;
-                timer_count = 0;        //reset count
-                }
-            else
-                {
-                myled = 1;              //If LED on, turn it off &
-                timer_count = 0;        //reset count
-                }
-            }
-    }
-}
 
-extern "C" void TIMER1_IRQHandler (void)
-{
-if((LPC_TIM1->IR & 0x01) == 0x01)   // if MR0 interrupt, proceed
-    {
-    LPC_TIM1->IR |= 1 << 0;         // Clear MR0 interrupt flag
-    timer1_count++;                  //increment timer_count
-    
-   // pc.printf("timer1_count %d \n\r", timer1_count);
-    if (timer1_count >= 20)      //Set timer_count for about 8 seconds
-            {
-            if (myled2 == 1)             //If LED off, turn it on &
-                {
-                myled2 = 0;
-                timer1_count = 0;        //reset count
-                }
-            else
-                {
-                myled2 = 1;              //If LED on, turn it off &
-                timer1_count = 0;        //reset count
-                }
-            }
-    }
-}
- 
-void timer0_init(void)
-{
-    LPC_SC->PCONP |=1<1;            //timer0 power on
-    LPC_TIM0->MR0 = 2398000;        //100 msec
-    LPC_TIM0->MCR = 3;              //interrupt and reset control
-                                    //3 = Interrupt & reset timer0 on match
-                                    //1 = Interrupt only, no reset of timer0
-    NVIC_EnableIRQ(TIMER0_IRQn);    //enable timer0 interrupt
-    LPC_TIM0->TCR = 1;              //enable Timer0
-    pc.printf("Done timer0_init\n\r");
-}
+Queue<char, 16> ReaderQueue;
 
-void timer1_init(void)
-{
-    LPC_SC->PCONP |=1<<2;            //timer1 power on
-    LPC_TIM1->MR0 = 2398000;        //100 msec
-    LPC_TIM1->MCR = 3;              //interrupt and reset control
-                                    //3 = Interrupt & reset timer1 on match
-                                    //1 = Interrupt only, no reset of timer0
-    NVIC_EnableIRQ(TIMER1_IRQn);    //enable timer1 interrupt
-    LPC_TIM1->TCR = 1;              //enable Timer1
-    pc.printf("Done timer1_init\n\r");
-}
- 
- 
 int main (void) 
 {
-    myled = 0;
-    myled2 = 0;
-    timer0_init();
-    timer1_init();
+    Thread thread1(Writer_thread);
+    Thread thread2(Reader_thread);
+    Thread thread3(Modulator_thread);
+    Thread thread4(Demodulator_thread);
+    Thread thread5(Sender_thread);
+    Thread thread6(Receiver_thread);
     
     while(1)
     {
-             
+    // wait forever...        
     }
 }
\ No newline at end of file