ADMW1001_Mbed_FW / Mbed OS EV-PRO-MW1001_v82_25

Mbed Fw supporting Device FW v82.25

main.cpp@51:393e1e7ae860, 2020-03-06 (annotated)

Committer:
Vkadaba
Date:
Fri Mar 06 05:59:00 2020 +0000
Revision:
51:393e1e7ae860
Parent:
50:d84305e5e1c0 
SPIfrequency set to 700khz

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ADIJake 0:85855ecd3257 1 /*
Vkadaba 15:b5d57daeb7c0 2 Copyright 2019 (c) Analog Devices, Inc.
ADIJake 0:85855ecd3257 3
ADIJake 0:85855ecd3257 4 All rights reserved.
ADIJake 0:85855ecd3257 5
ADIJake 0:85855ecd3257 6 Redistribution and use in source and binary forms, with or without
ADIJake 0:85855ecd3257 7 modification, are permitted provided that the following conditions are met:
ADIJake 0:85855ecd3257 8 - Redistributions of source code must retain the above copyright
ADIJake 0:85855ecd3257 9 notice, this list of conditions and the following disclaimer.
ADIJake 0:85855ecd3257 10 - Redistributions in binary form must reproduce the above copyright
ADIJake 0:85855ecd3257 11 notice, this list of conditions and the following disclaimer in
ADIJake 0:85855ecd3257 12 the documentation and/or other materials provided with the
ADIJake 0:85855ecd3257 13 distribution.
ADIJake 0:85855ecd3257 14 - Neither the name of Analog Devices, Inc. nor the names of its
ADIJake 0:85855ecd3257 15 contributors may be used to endorse or promote products derived
ADIJake 0:85855ecd3257 16 from this software without specific prior written permission.
ADIJake 0:85855ecd3257 17 - The use of this software may or may not infringe the patent rights
ADIJake 0:85855ecd3257 18 of one or more patent holders. This license does not release you
ADIJake 0:85855ecd3257 19 from the requirement that you obtain separate licenses from these
ADIJake 0:85855ecd3257 20 patent holders to use this software.
ADIJake 0:85855ecd3257 21 - Use of the software either in source or binary form, must be run
ADIJake 0:85855ecd3257 22 on or directly connected to an Analog Devices Inc. component.
ADIJake 0:85855ecd3257 23
ADIJake 0:85855ecd3257 24 THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
ADIJake 0:85855ecd3257 25 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
ADIJake 0:85855ecd3257 26 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
ADIJake 0:85855ecd3257 27 IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
ADIJake 0:85855ecd3257 28 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
ADIJake 0:85855ecd3257 29 LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
ADIJake 0:85855ecd3257 30 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
ADIJake 0:85855ecd3257 31 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
ADIJake 0:85855ecd3257 32 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
ADIJake 0:85855ecd3257 33 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ADIJake 0:85855ecd3257 34
ADIJake 0:85855ecd3257 35 *****************************************************************************/
ADIJake 0:85855ecd3257 36 /*!
ADIJake 0:85855ecd3257 37 ******************************************************************************
ADIJake 0:85855ecd3257 38 * @file:
ADIJake 0:85855ecd3257 39 *-----------------------------------------------------------------------------
ADIJake 0:85855ecd3257 40 *
ADIJake 0:85855ecd3257 41 */
ADIJake 0:85855ecd3257 42 #include "mbed.h"
Vkadaba 5:0728bde67bdb 43 #include "admw_api.h"
Vkadaba 5:0728bde67bdb 44 #include "admw1001/admw1001_api.h"
Vkadaba 5:0728bde67bdb 45 #include "admw_log.h"
ADIJake 0:85855ecd3257 46 #include "common/utils.h"
ADIJake 0:85855ecd3257 47 #include "common/platform.h"
Vkadaba 14:266ab283b086 48 #include "admw1001/ADMW1001_REGISTERS.h"
Vkadaba 5:0728bde67bdb 49
Vkadaba 34:b60ee1e0af2b 50 extern ADMW_CONFIG thermocouple_typeK_cjc0_config;
Vkadaba 34:b60ee1e0af2b 51 extern ADMW_CONFIG thermocouple_typeT_cjc0_config;
Vkadaba 34:b60ee1e0af2b 52 extern ADMW_CONFIG thermocouple_typeJ_cjc0_config;
Vkadaba 34:b60ee1e0af2b 53 extern ADMW_CONFIG rtd_3w_pt100_config;
Vkadaba 34:b60ee1e0af2b 54 extern ADMW_CONFIG rtd_4w_config;
Vkadaba 34:b60ee1e0af2b 55 extern ADMW_CONFIG bridge_4w_load_cell_config;
Vkadaba 5:0728bde67bdb 56 extern ADMW_CONFIG multichannel_continuous_config;
Vkadaba 5:0728bde67bdb 57 extern ADMW_CONFIG multichannel_singlecycle_config;
Vkadaba 34:b60ee1e0af2b 58 extern ADMW_CONFIG i2c0_sensirionSHT3X_config;
Vkadaba 47:5b42b9f9d1eb 59 /* Use the following config if adding a configuration file from measureware designer*/
Vkadaba 47:5b42b9f9d1eb 60 extern ADMW_CONFIG measureware_config;
Vkadaba 47:5b42b9f9d1eb 61
Vkadaba 49:c31473bc013e 62 /* Change the following pointer to load or change the configurations */
Vkadaba 48:5731f1aa2c5a 63 static ADMW_CONFIG *pSelectedConfig = &thermocouple_typeK_cjc0_config;
ADIJake 0:85855ecd3257 64
Vkadaba 5:0728bde67bdb 65 static ADMW_CONNECTION connectionInfo = PLATFORM_CONNECTION_INFO;
ADIJake 0:85855ecd3257 66
Vkadaba 14:266ab283b086 67
ADIJake 0:85855ecd3257 68 int main()
ADIJake 0:85855ecd3257 69 {
Vkadaba 50:d84305e5e1c0 70
Vkadaba 5:0728bde67bdb 71 ADMW_RESULT res;
Vkadaba 5:0728bde67bdb 72 ADMW_STATUS status;
Vkadaba 5:0728bde67bdb 73 ADMW_DEVICE_HANDLE hDevice;
Vkadaba 5:0728bde67bdb 74 ADMW_MEASUREMENT_MODE eMeasurementMode = ADMW_MEASUREMENT_MODE_NORMAL;
ADIJake 0:85855ecd3257 75 bool bDeviceReady;
Vkadaba 23:bb685f35b08b 76
ADIJake 0:85855ecd3257 77 /*
Vkadaba 19:09d58952b65d 78 * Open an ADMW1001 device instance.
ADIJake 0:85855ecd3257 79 */
Vkadaba 5:0728bde67bdb 80 res = admw_Open(0, &connectionInfo, &hDevice);
Vkadaba 23:bb685f35b08b 81 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 82 ADMW_LOG_ERROR("Failed to open device instance");
ADIJake 0:85855ecd3257 83 return res;
ADIJake 0:85855ecd3257 84 }
Vkadaba 23:bb685f35b08b 85
ADIJake 0:85855ecd3257 86 /*
Vkadaba 19:09d58952b65d 87 * Reset the given ADMW1001 device....
ADIJake 0:85855ecd3257 88 */
Vkadaba 19:09d58952b65d 89 ADMW_LOG_INFO("Resetting ADMW1001 device, please wait...");
Vkadaba 5:0728bde67bdb 90 res = admw_Reset(hDevice);
Vkadaba 23:bb685f35b08b 91 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 92 ADMW_LOG_ERROR("Failed to reset device");
ADIJake 0:85855ecd3257 93 return res;
ADIJake 0:85855ecd3257 94 }
ADIJake 0:85855ecd3257 95 /*
ADIJake 0:85855ecd3257 96 * ...and wait until the device is ready.
ADIJake 0:85855ecd3257 97 */
ADIJake 0:85855ecd3257 98 do {
ADIJake 0:85855ecd3257 99 wait_ms(100);
Vkadaba 5:0728bde67bdb 100 res = admw_GetDeviceReadyState(hDevice, &bDeviceReady);
Vkadaba 23:bb685f35b08b 101 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 102 ADMW_LOG_ERROR("Failed to get device ready-state");
ADIJake 0:85855ecd3257 103 return res;
ADIJake 0:85855ecd3257 104 }
ADIJake 0:85855ecd3257 105 } while (! bDeviceReady);
Vkadaba 19:09d58952b65d 106 ADMW_LOG_INFO("ADMW1001 device ready");
ADIJake 0:85855ecd3257 107 /*
ADIJake 0:85855ecd3257 108 * Write configuration settings to the device registers.
Vkadaba 5:0728bde67bdb 109 * Settings are not applied until admw_ApplyConfigUpdates() is called.
ADIJake 0:85855ecd3257 110 */
Vkadaba 5:0728bde67bdb 111 ADMW_LOG_INFO("Setting device configuration");
Vkadaba 5:0728bde67bdb 112 res = admw_SetConfig(hDevice, pSelectedConfig);
Vkadaba 23:bb685f35b08b 113 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 114 ADMW_LOG_ERROR("Failed to set device configuration");
ADIJake 0:85855ecd3257 115 return res;
ADIJake 0:85855ecd3257 116 }
Vkadaba 5:0728bde67bdb 117 res = admw_ApplyConfigUpdates(hDevice);
Vkadaba 23:bb685f35b08b 118 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 119 ADMW_LOG_ERROR("Failed to apply device configuration");
ADIJake 0:85855ecd3257 120 return res;
ADIJake 0:85855ecd3257 121 }
ADIJake 0:85855ecd3257 122 /*
ADIJake 0:85855ecd3257 123 * Check device status after updating the configuration
ADIJake 0:85855ecd3257 124 */
Vkadaba 5:0728bde67bdb 125 res = admw_GetStatus(hDevice, &status);
Vkadaba 50:d84305e5e1c0 126 admw_deviceInformation(hDevice);
Vkadaba 23:bb685f35b08b 127 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 128 ADMW_LOG_ERROR("Failed to retrieve device status");
ADIJake 0:85855ecd3257 129 return res;
ADIJake 0:85855ecd3257 130 }
ADIJake 0:85855ecd3257 131 if (status.deviceStatus &
Vkadaba 23:bb685f35b08b 132 (ADMW_DEVICE_STATUS_ERROR | ADMW_DEVICE_STATUS_ALERT)) {
ADIJake 0:85855ecd3257 133 utils_printStatus(&status);
ADIJake 0:85855ecd3257 134 }
ADIJake 0:85855ecd3257 135
ADIJake 0:85855ecd3257 136 /*
ADIJake 0:85855ecd3257 137 * Kick off the measurement cycle here
ADIJake 0:85855ecd3257 138 */
Vkadaba 5:0728bde67bdb 139 ADMW_LOG_INFO("Configuration completed, starting measurement cycles");
ADIJake 0:85855ecd3257 140 utils_runMeasurement(hDevice, eMeasurementMode);
ADIJake 0:85855ecd3257 141
ADIJake 0:85855ecd3257 142 /*
ADIJake 0:85855ecd3257 143 * Clean up and exit
ADIJake 0:85855ecd3257 144 */
Vkadaba 5:0728bde67bdb 145 res = admw_Close(hDevice);
Vkadaba 23:bb685f35b08b 146 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 147 ADMW_LOG_ERROR("Failed to close device instance");
ADIJake 0:85855ecd3257 148 return res;
ADIJake 0:85855ecd3257 149 }
ADIJake 0:85855ecd3257 150
ADIJake 0:85855ecd3257 151 return 0;
ADIJake 0:85855ecd3257 152 }
ADIJake 0:85855ecd3257 153