Diff: thermocouple_typeJ_cjc0_config.c

Revision:

34:b60ee1e0af2b

Child:

37:6acfbb4405cd

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/thermocouple_typeJ_cjc0_config.c	Tue Nov 19 11:17:35 2019 +0000
@@ -0,0 +1,129 @@
+/*
+Copyright 2019 (c) Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+  - Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+  - Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+  - Neither the name of Analog Devices, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+  - The use of this software may or may not infringe the patent rights
+    of one or more patent holders. This license does not release you
+    from the requirement that you obtain separate licenses from these
+    patent holders to use this software.
+  - Use of the software either in source or binary form, must be run
+    on or directly connected to an Analog Devices Inc. component.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*!
+ ******************************************************************************
+ * @file:
+ * @brief:
+ *-----------------------------------------------------------------------------
+ */
+
+
+#include "admw_config_types.h"
+
+ADMW_CONFIG thermocouple_typeJ_cjc0_config = {
+    .versionId = { .major = 2, .minor = 0 },
+    .productId = ADMW_PRODUCT_ID_ADMW1001,
+    .admw1001 = {
+        .power = {
+            .powerMode = ADMW1001_POWER_MODE_ACTIVE,
+        },
+        .measurement = {
+            .operatingMode = ADMW1001_OPERATING_MODE_CONTINUOUS,
+            .dataReadyMode = ADMW1001_DATAREADY_PER_CYCLE, // FIX: Temporarily all values from json are hardcoded to this one in the Contracts.FileGenerator - > file translations!!
+            .cycleInterval = 0,
+        },
+        .diagnostics = {
+            .disableGlobalDiag = true,
+            .disableMeasurementDiag = true,
+            .osdFrequency = ADMW1001_OPEN_SENSOR_DIAGNOSTICS_DISABLED,
+        },
+        .channels = {
+            [ADMW1001_CH_ID_ANLG_1_UNIVERSAL] = {
+                .enableChannel = true,
+                .disablePublishing = false,
+                .compensationChannel = ADMW1001_CH_ID_NONE,
+                .lutSelect = ADMW1001_LUT_DEFAULT,
+                .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS,
+                .lowThreshold = -50,
+                .highThreshold = 250,
+                .offsetAdjustment = 0.0,
+                .gainAdjustment = 0.0,
+                .sensorParameter = 0.0,
+                .measurementsPerCycle = 1,
+                .cycleSkipCount = 0,
+                .extraSettlingTime = 0,
+                .priority = 0,
+                .adcChannelConfig = {
+                    .sensor = ADMW1001_ADC_SENSOR_RTD_2WIRE_PT100,
+                    .gain = ADMW1001_ADC_GAIN_1X,
+                    .current = {
+                        .excitationState= ADMW1001_ADC_EXC_STATE_ALWAYS_ON,
+                        .outputLevel = ADMW1001_ADC_EXC_CURRENT_250uA,
+                        .diodeRatio = 0,
+                    },
+                    .rtdCurve = ADMW1001_ADC_RTD_CURVE_EUROPEAN,
+                    .filter = {
+                        .type = ADMW1001_ADC_FILTER_SINC3,
+                        .sf = ADMW1001_SF_8P24HZ,
+                        .chopMode = ADMW1001_CHOP_MD_SW,
+                        .notch1p2 = true,
+                        .groundSwitch = ADMW1001_ADC_GND_SW_OPEN
+                    },
+                    .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL,
+                },
+            },
+            [ADMW1001_CH_ID_ANLG_1_DIFFERENTIAL] = {
+                .enableChannel = true,
+                .disablePublishing = false,
+                .compensationChannel = ADMW1001_CH_ID_ANLG_1_UNIVERSAL,
+                .lutSelect = ADMW1001_LUT_DEFAULT,
+                .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS,
+                .lowThreshold = -50,
+                .highThreshold = 250,
+                .offsetAdjustment = 0.0,
+                .gainAdjustment = 0.0,
+                .sensorParameter = 0.0,
+                .measurementsPerCycle = 1,
+                .cycleSkipCount = 0,
+                .extraSettlingTime = 4499.99986449257,
+                .priority = 0,
+                .adcChannelConfig = {
+                    .sensor = ADMW1001_ADC_SENSOR_THERMOCOUPLE_J,
+                    .gain = ADMW1001_ADC_GAIN_8X,
+                    .filter = {
+                        .type = ADMW1001_ADC_FILTER_SINC3,
+                        .sf = ADMW1001_SF_8P24HZ,
+                        .chopMode = ADMW1001_CHOP_MD_SW,
+                        .notch1p2 = true,
+                        .groundSwitch = ADMW1001_ADC_GND_SW_OPEN
+                    },
+                    .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL,
+                },
+            },
+        },
+    },
+};