ADMW1001_Mbed_FW
/
EV-PRO-MW1001_Development
Mbed Development branch for MeasrueWare
Diff: thermocouple_typeJ_cjc0_config.c
- Revision:
- 74:27a28f452d71
- Child:
- 75:434d91af4cc7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/thermocouple_typeJ_cjc0_config.c Fri Apr 24 12:04:28 2020 +0000 @@ -0,0 +1,124 @@ +/* +Copyright 2019 (c) Analog Devices, Inc. + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + - Neither the name of Analog Devices, Inc. nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + - The use of this software may or may not infringe the patent rights + of one or more patent holders. This license does not release you + from the requirement that you obtain separate licenses from these + patent holders to use this software. + - Use of the software either in source or binary form, must be run + on or directly connected to an Analog Devices Inc. component. + +THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR +IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +/*! + ****************************************************************************** + * @file: + * @brief: + *----------------------------------------------------------------------------- + */ + + +#include "admw_config_types.h" + +ADMW_CONFIG thermocouple_typeJ_cjc0_config = { + .versionId = { .major = 2, .minor = 0 }, + .productId = ADMW_PRODUCT_ID_ADMW1001, + .admw1001 = { + .power = { + .powerMode = ADMW1001_POWER_MODE_ACTIVE, + }, + .measurement = { + .externalRefVoltage=0.0, + .AVDDVoltage=3.0, + .operatingMode = ADMW1001_OPERATING_MODE_CONTINUOUS, + .dataReadyMode = ADMW1001_DATAREADY_PER_CYCLE, + .cycleInterval = 0, + .excitationState = ADMW1001_ADC_EXC_STATE_CYCLE_POWER, + .vBiasEnable = true, + .RSenseValue = 1000, + .groundSwitch = ADMW1001_ADC_GND_SW_OPEN, + .extVrefBuffMode = ADMW1001_VREF_BUFF_MODE_DISABLE_BOTH, + .fifoNumCycles = 1, + }, + .channels = { + [ADMW1001_CH_ID_ANLG_1_UNIVERSAL] = { + .enableChannel = true, + .disablePublishing = false, + .compensationChannel = ADMW1001_CH_ID_NONE, + .lutSelect = ADMW1001_LUT_DEFAULT, + .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS, + .extraSettlingTime = 0, + .lowThreshold = -50, + .highThreshold = 250, + .measurementsPerCycle = 1, + .offsetAdjustment = 0, + .gainAdjustment = 1, + .adcChannelConfig = { + .sensor = ADMW1001_ADC_SENSOR_RTD_2WIRE_PT100, + .gain = ADMW1001_ADC_GAIN_1X, + .current = { + .outputLevel = ADMW1001_ADC_EXC_CURRENT_500uA, + }, + .rtdCurve = ADMW1001_ADC_RTD_CURVE_EUROPEAN, + .filter = { + .type = ADMW1001_ADC_FILTER_SINC3, + .sf = ADMW1001_SF_8P24HZ, + .chopMode = ADMW1001_CHOP_MD_ON, + .notch1p2 = true + }, + .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL, + .bufferBypass = ADMW1001_BUFFER_BYPASSS_DISABLED, + }, + }, + [ADMW1001_CH_ID_ANLG_1_DIFFERENTIAL] = { + .enableChannel = true, + .disablePublishing = false, + .compensationChannel = ADMW1001_CH_ID_ANLG_1_UNIVERSAL, + .lutSelect = ADMW1001_LUT_DEFAULT, + .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS, + .extraSettlingTime = 4.49999986449257, + .lowThreshold = -50, + .highThreshold = 250, + .measurementsPerCycle = 1, + .offsetAdjustment = 0, + .gainAdjustment = 1, + .adcChannelConfig = { + .sensor = ADMW1001_ADC_SENSOR_THERMOCOUPLE_J, + .gain = ADMW1001_ADC_GAIN_8X, + .filter = { + .type = ADMW1001_ADC_FILTER_SINC3, + .sf = ADMW1001_SF_8P24HZ, + .chopMode = ADMW1001_CHOP_MD_ON, + .notch1p2 = true + }, + .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL, + .bufferBypass = ADMW1001_BUFFER_BYPASSS_DISABLED, + }, + }, + }, + }, +}; \ No newline at end of file