ADMW1001_Mbed_FW / Mbed OS EV-PRO-MW1001_Development

Mbed Development branch for MeasrueWare

main.cpp@73:cae0c514bea6, 2020-04-24 (annotated)

Committer:
rfinnert
Date:
Fri Apr 24 11:51:13 2020 +0000
Revision:
73:cae0c514bea6
Parent:
70:420fac5132f5
Child:
74:27a28f452d71
Bytesnap updated project

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Vkadaba 55:215da406282b 1
ADIJake 0:85855ecd3257 2 /*
Vkadaba 15:b5d57daeb7c0 3 Copyright 2019 (c) Analog Devices, Inc.
ADIJake 0:85855ecd3257 4
ADIJake 0:85855ecd3257 5 All rights reserved.
ADIJake 0:85855ecd3257 6
ADIJake 0:85855ecd3257 7 Redistribution and use in source and binary forms, with or without
ADIJake 0:85855ecd3257 8 modification, are permitted provided that the following conditions are met:
ADIJake 0:85855ecd3257 9 - Redistributions of source code must retain the above copyright
ADIJake 0:85855ecd3257 10 notice, this list of conditions and the following disclaimer.
ADIJake 0:85855ecd3257 11 - Redistributions in binary form must reproduce the above copyright
ADIJake 0:85855ecd3257 12 notice, this list of conditions and the following disclaimer in
ADIJake 0:85855ecd3257 13 the documentation and/or other materials provided with the
ADIJake 0:85855ecd3257 14 distribution.
ADIJake 0:85855ecd3257 15 - Neither the name of Analog Devices, Inc. nor the names of its
ADIJake 0:85855ecd3257 16 contributors may be used to endorse or promote products derived
ADIJake 0:85855ecd3257 17 from this software without specific prior written permission.
ADIJake 0:85855ecd3257 18 - The use of this software may or may not infringe the patent rights
ADIJake 0:85855ecd3257 19 of one or more patent holders. This license does not release you
ADIJake 0:85855ecd3257 20 from the requirement that you obtain separate licenses from these
ADIJake 0:85855ecd3257 21 patent holders to use this software.
ADIJake 0:85855ecd3257 22 - Use of the software either in source or binary form, must be run
ADIJake 0:85855ecd3257 23 on or directly connected to an Analog Devices Inc. component.
ADIJake 0:85855ecd3257 24
ADIJake 0:85855ecd3257 25 THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
ADIJake 0:85855ecd3257 26 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
ADIJake 0:85855ecd3257 27 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
ADIJake 0:85855ecd3257 28 IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
ADIJake 0:85855ecd3257 29 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
ADIJake 0:85855ecd3257 30 LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
ADIJake 0:85855ecd3257 31 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
ADIJake 0:85855ecd3257 32 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
ADIJake 0:85855ecd3257 33 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
ADIJake 0:85855ecd3257 34 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ADIJake 0:85855ecd3257 35
ADIJake 0:85855ecd3257 36 *****************************************************************************/
ADIJake 0:85855ecd3257 37 /*!
ADIJake 0:85855ecd3257 38 ******************************************************************************
ADIJake 0:85855ecd3257 39 * @file:
ADIJake 0:85855ecd3257 40 *-----------------------------------------------------------------------------
ADIJake 0:85855ecd3257 41 *
ADIJake 0:85855ecd3257 42 */
ADIJake 0:85855ecd3257 43 #include "mbed.h"
Vkadaba 5:0728bde67bdb 44 #include "admw_api.h"
Vkadaba 5:0728bde67bdb 45 #include "admw1001/admw1001_api.h"
Vkadaba 5:0728bde67bdb 46 #include "admw_log.h"
ADIJake 0:85855ecd3257 47 #include "common/utils.h"
ADIJake 0:85855ecd3257 48 #include "common/platform.h"
Vkadaba 54:31921ad29828 49 #include "admw1001/ADMW1001_REGISTERS_typedefs.h"
Vkadaba 14:266ab283b086 50 #include "admw1001/ADMW1001_REGISTERS.h"
Vkadaba 54:31921ad29828 51 #include "admw1001/admw1001_lut_data.h"
Vkadaba 54:31921ad29828 52 #include "admw1001/admw1001_host_comms.h"
Vkadaba 56:38b36e947602 53 #include "mbedVersion.h"
Vkadaba 5:0728bde67bdb 54
rfinnert 73:cae0c514bea6 55
rfinnert 73:cae0c514bea6 56 extern ADMW_CONFIG default_config;
Vkadaba 47:5b42b9f9d1eb 57 /* Use the following config if adding a configuration file from measureware designer*/
Vkadaba 47:5b42b9f9d1eb 58 extern ADMW_CONFIG measureware_config;
Vkadaba 47:5b42b9f9d1eb 59
Vkadaba 49:c31473bc013e 60 /* Change the following pointer to load or change the configurations */
rfinnert 73:cae0c514bea6 61 static ADMW_CONFIG *pSelectedConfig = &default_config;
Vkadaba 54:31921ad29828 62
Vkadaba 54:31921ad29828 63 /* use the following to load LUT */
Vkadaba 54:31921ad29828 64 extern ADMW1001_LUT_DESCRIPTOR *lut_desc_list[];
Vkadaba 54:31921ad29828 65 extern ADMW1001_LUT_TABLE_DATA *lut_data_list[];
Vkadaba 54:31921ad29828 66 extern unsigned lut_num_tables;
ADIJake 0:85855ecd3257 67
Vkadaba 5:0728bde67bdb 68 static ADMW_CONNECTION connectionInfo = PLATFORM_CONNECTION_INFO;
ADIJake 0:85855ecd3257 69
Vkadaba 14:266ab283b086 70
ADIJake 0:85855ecd3257 71 int main()
ADIJake 0:85855ecd3257 72 {
Vkadaba 5:0728bde67bdb 73 ADMW_RESULT res;
Vkadaba 5:0728bde67bdb 74 ADMW_STATUS status;
Vkadaba 5:0728bde67bdb 75 ADMW_DEVICE_HANDLE hDevice;
Vkadaba 5:0728bde67bdb 76 ADMW_MEASUREMENT_MODE eMeasurementMode = ADMW_MEASUREMENT_MODE_NORMAL;
ADIJake 0:85855ecd3257 77 bool bDeviceReady;
Vkadaba 56:38b36e947602 78
ADIJake 0:85855ecd3257 79 /*
Vkadaba 19:09d58952b65d 80 * Open an ADMW1001 device instance.
ADIJake 0:85855ecd3257 81 */
Vkadaba 5:0728bde67bdb 82 res = admw_Open(0, &connectionInfo, &hDevice);
Vkadaba 23:bb685f35b08b 83 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 84 ADMW_LOG_ERROR("Failed to open device instance");
ADIJake 0:85855ecd3257 85 return res;
ADIJake 0:85855ecd3257 86 }
Vkadaba 56:38b36e947602 87 ADMW_LOG_INFO("Mbed Firmware version is %X.%X.%X",MBED_HOST_MAJOR,MBED_HOST_MINOR,MBED_HOST_BUILD);
ADIJake 0:85855ecd3257 88 /*
Vkadaba 19:09d58952b65d 89 * Reset the given ADMW1001 device....
ADIJake 0:85855ecd3257 90 */
Vkadaba 19:09d58952b65d 91 ADMW_LOG_INFO("Resetting ADMW1001 device, please wait...");
Vkadaba 5:0728bde67bdb 92 res = admw_Reset(hDevice);
Vkadaba 23:bb685f35b08b 93 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 94 ADMW_LOG_ERROR("Failed to reset device");
ADIJake 0:85855ecd3257 95 return res;
ADIJake 0:85855ecd3257 96 }
ADIJake 0:85855ecd3257 97 /*
ADIJake 0:85855ecd3257 98 * ...and wait until the device is ready.
ADIJake 0:85855ecd3257 99 */
ADIJake 0:85855ecd3257 100 do {
ADIJake 0:85855ecd3257 101 wait_ms(100);
Vkadaba 5:0728bde67bdb 102 res = admw_GetDeviceReadyState(hDevice, &bDeviceReady);
Vkadaba 23:bb685f35b08b 103 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 104 ADMW_LOG_ERROR("Failed to get device ready-state");
ADIJake 0:85855ecd3257 105 return res;
ADIJake 0:85855ecd3257 106 }
ADIJake 0:85855ecd3257 107 } while (! bDeviceReady);
Vkadaba 19:09d58952b65d 108 ADMW_LOG_INFO("ADMW1001 device ready");
ADIJake 0:85855ecd3257 109 /*
ADIJake 0:85855ecd3257 110 * Write configuration settings to the device registers.
Vkadaba 5:0728bde67bdb 111 * Settings are not applied until admw_ApplyConfigUpdates() is called.
ADIJake 0:85855ecd3257 112 */
Vkadaba 5:0728bde67bdb 113 ADMW_LOG_INFO("Setting device configuration");
Vkadaba 5:0728bde67bdb 114 res = admw_SetConfig(hDevice, pSelectedConfig);
Vkadaba 23:bb685f35b08b 115 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 116 ADMW_LOG_ERROR("Failed to set device configuration");
ADIJake 0:85855ecd3257 117 return res;
ADIJake 0:85855ecd3257 118 }
Vkadaba 54:31921ad29828 119 unsigned lutBufferSize = ADMW_LUT_MAX_SIZE;
Vkadaba 54:31921ad29828 120 ADMW1001_LUT *pLutBuffer = (ADMW1001_LUT *) malloc(lutBufferSize);
Vkadaba 54:31921ad29828 121 if (pLutBuffer == NULL) {
Vkadaba 54:31921ad29828 122 return 1;
Vkadaba 54:31921ad29828 123 }
Vkadaba 54:31921ad29828 124
Vkadaba 54:31921ad29828 125 res=admw1001_AssembleLutData(pLutBuffer, lutBufferSize,
Vkadaba 54:31921ad29828 126 lut_num_tables,
Vkadaba 54:31921ad29828 127 lut_desc_list,
Vkadaba 54:31921ad29828 128 lut_data_list);
Vkadaba 54:31921ad29828 129 if( res != ADMW_SUCCESS ) {
Vkadaba 54:31921ad29828 130 ADMW_LOG_ERROR("Failed to assemble user-defined LUT data");
Vkadaba 54:31921ad29828 131 return res;
Vkadaba 54:31921ad29828 132 }
Vkadaba 54:31921ad29828 133
Vkadaba 54:31921ad29828 134 res=admw1001_SetLutData(hDevice,
Vkadaba 54:31921ad29828 135 pLutBuffer);
Vkadaba 54:31921ad29828 136 if( res != ADMW_SUCCESS ) {
Vkadaba 54:31921ad29828 137 ADMW_LOG_ERROR("Failed to set user-defined LUT data");
Vkadaba 54:31921ad29828 138 }
Vkadaba 54:31921ad29828 139
Vkadaba 54:31921ad29828 140 free( pLutBuffer );
Vkadaba 5:0728bde67bdb 141 res = admw_ApplyConfigUpdates(hDevice);
Vkadaba 23:bb685f35b08b 142 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 143 ADMW_LOG_ERROR("Failed to apply device configuration");
ADIJake 0:85855ecd3257 144 return res;
ADIJake 0:85855ecd3257 145 }
ADIJake 0:85855ecd3257 146 /*
ADIJake 0:85855ecd3257 147 * Check device status after updating the configuration
ADIJake 0:85855ecd3257 148 */
Vkadaba 5:0728bde67bdb 149 res = admw_GetStatus(hDevice, &status);
Vkadaba 50:d84305e5e1c0 150 admw_deviceInformation(hDevice);
Vkadaba 23:bb685f35b08b 151 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 152 ADMW_LOG_ERROR("Failed to retrieve device status");
ADIJake 0:85855ecd3257 153 return res;
ADIJake 0:85855ecd3257 154 }
ADIJake 0:85855ecd3257 155 if (status.deviceStatus &
Vkadaba 23:bb685f35b08b 156 (ADMW_DEVICE_STATUS_ERROR | ADMW_DEVICE_STATUS_ALERT)) {
ADIJake 0:85855ecd3257 157 utils_printStatus(&status);
ADIJake 0:85855ecd3257 158 }
ADIJake 0:85855ecd3257 159
ADIJake 0:85855ecd3257 160 /*
ADIJake 0:85855ecd3257 161 * Kick off the measurement cycle here
ADIJake 0:85855ecd3257 162 */
Vkadaba 5:0728bde67bdb 163 ADMW_LOG_INFO("Configuration completed, starting measurement cycles");
rfinnert 73:cae0c514bea6 164
rfinnert 73:cae0c514bea6 165 bool b_serialInput = true;
rfinnert 73:cae0c514bea6 166
rfinnert 73:cae0c514bea6 167 if(b_serialInput == true)
rfinnert 73:cae0c514bea6 168 {
rfinnert 73:cae0c514bea6 169 utils_runMeasurementsFromSerialPing(hDevice, eMeasurementMode);
rfinnert 73:cae0c514bea6 170 }
rfinnert 73:cae0c514bea6 171 else
rfinnert 73:cae0c514bea6 172 {
rfinnert 73:cae0c514bea6 173 utils_runMeasurement(hDevice, eMeasurementMode);
rfinnert 73:cae0c514bea6 174 }
rfinnert 73:cae0c514bea6 175
ADIJake 0:85855ecd3257 176
ADIJake 0:85855ecd3257 177 /*
ADIJake 0:85855ecd3257 178 * Clean up and exit
ADIJake 0:85855ecd3257 179 */
Vkadaba 5:0728bde67bdb 180 res = admw_Close(hDevice);
Vkadaba 23:bb685f35b08b 181 if (res != ADMW_SUCCESS) {
Vkadaba 5:0728bde67bdb 182 ADMW_LOG_ERROR("Failed to close device instance");
ADIJake 0:85855ecd3257 183 return res;
ADIJake 0:85855ecd3257 184 }
ADIJake 0:85855ecd3257 185
ADIJake 0:85855ecd3257 186 return 0;
ADIJake 0:85855ecd3257 187 }
ADIJake 0:85855ecd3257 188