4CV4_2do_2019
Adivina el Número Secreto desde la Terminal Serial
Dependencies: mbed
Revision 0:f680c41c1640, committed 2019-09-05
- Comitter:
- Antulius
- Date:
- Thu Sep 05 23:29:04 2019 +0000
- Commit message:
- Adivina
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PinNames.h Thu Sep 05 23:29:04 2019 +0000
@@ -0,0 +1,155 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+ // Ports
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = NC,
+ PA_14 = NC,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = NC,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = NC,
+ PC_1 = NC,
+ PC_2 = NC,
+ PC_3 = NC,
+ PC_4 = NC,
+ PC_5 = NC,
+ PC_6 = NC,
+ PC_7 = NC,
+ PC_8 = NC,
+ PC_9 = NC,
+ PC_10 = NC,
+ PC_11 = NC,
+ PC_12 = NC,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = NC,
+
+ // ADC internal channels
+ ADC_TEMP = 0xF0,
+ ADC_VREF = 0xF1,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = NC,
+ A5 = NC,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = NC,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ Red_Led = NC,
+ Green_Led = PC_13,
+ Blue_Led = NC,
+ LED1 = PC_13,
+ LED2 = NC,
+ LED3 = NC,
+ LED4 = NC,
+ USER_BUTTON = NC,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PB_3,
+ CANRX = PB_8,
+ CANTX = PB_9,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SysClockConf.cpp Thu Sep 05 23:29:04 2019 +0000
@@ -0,0 +1,56 @@
+/*
+ ******************************************************************************
+ * @file SysClockConf.c
+ * @version
+ * @date 05-July-2016
+ * @brief System Clock configuration for STM32F103C8T6
+ *****************************************************************************
+ *
+ * All rights reserved.
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "SysClockConf.h"
+#include "mbed.h"
+
+void HSE_SystemClock_Config(void) {
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_PeriphCLKInitTypeDef PeriphClkInit;
+
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+ RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+ HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
+ PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
+ PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+ HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+}
+
+void confSysClock(void) {
+ HAL_RCC_DeInit();
+ HSE_SystemClock_Config();
+ SystemCoreClockUpdate();
+}
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SysClockConf.h Thu Sep 05 23:29:04 2019 +0000 @@ -0,0 +1,2 @@ +#pragma once +void confSysClock(void); \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Sep 05 23:29:04 2019 +0000
@@ -0,0 +1,204 @@
+/* ###########################################################################
+** Archivo : main.c
+** Proyecto : STM32-103C8_Adivina
+** Procesador : STM32F103C8
+** Herramienta : Mbed
+** Version : Driver 01.01
+** Compilador : GNU C Compiler
+** Fecha/Hora : 14-07-2015, 11:48, # CodeGen: 0
+** Descripción :
+** Este proyecto muestra la configuración y uso de la Terminal Serial
+** This module contains user's application code.
+** Componentes : Timer, etc .
+** Configuraciones : Se puede seleccionar entre diferentes velocodades de
+** transmisión
+** Autores :
+** ATEAM Development Group:
+** - Antulio Morgado Valle
+**
+** Versión : Beta
+** Revisión : A
+** Release : 0
+** Bugs & Fixes :
+** Date : 20/10/2019
+** Ejemplpo del Hola Mundo
+** 27/09/2010
+**
+**
+** ###########################################################################*/
+/*
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+: Includes
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+*/
+
+#include "stm32f103c8t6.h"
+#include "mbed.h"
+#include "Serial.h"
+#include "stdio.h"
+/*
+:...............................................................................
+: Definiciones
+:...............................................................................
+*/
+#define on 0 // Estado para boton presionado
+#define off 1 // Estado para boton sin presionar
+#define hold 2 // Estado para boton mantenido
+#define release 3 // Estado para boton liberado
+#define FALSE 0 // Estado FALSO
+#define TRUE 1 // Estado VERDADERO
+/*
++-------------------------------------------------------------------------------
+| Configuración de Puertos
++-------------------------------------------------------------------------------
+*/
+DigitalOut verde (LED1); // PC_13 (Green_Led)
+DigitalOut rojo (PB_1); // NC (Red_Led)
+
+// ***** Host PC Terminal Communication channels
+Serial terminal (PA_2, PA_3); // Inicializa la comunicación serial a la PC (Tx,Rx)
+//Serial terminal(USBTX, USBRX,115200);// Tx, Rx Baud Rate - Terminal Serial por USB @ 115,200 Bauds
+
+/*
++-------------------------------------------------------------------------------
+| Variables Globales de Usuario
++-------------------------------------------------------------------------------
+*/
+//uint32_t Baud_Rate = 9600; // Velocidad de Transmisión (Bauds)
+/*
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+| Definición de Funciones Prototipo y Rutinas de los Vectores de Interrupción
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+*/
+void Setup(void);
+/* END definitions */
+
+/*
+#===============================================================================
+|
+| P R O G R A M A P R I N C I P A L
+|
+#===============================================================================
+*/
+int main()
+{ // Inicialización de variables, puertos e interrupciones
+confSysClock(); // Configure system clock (72MHz HSE clock, 48MHz USB clock)
+Setup(); // Inicialización del sistema
+ terminal.printf ("ADIVINA\n\r");
+ rojo = off;
+ verde = off;
+
+ while(TRUE)
+ {
+Inicio: terminal.printf(" DIGITE UN NUMERO SECRETO DE 0 A 9 \r\n");
+ char secreto = terminal.getc();
+ rojo = on;
+ verde = on;
+ Intenta: terminal.printf(" ADIVINA EL NUMERO: \r\n");
+ char respuesta = terminal.getc();
+ if( secreto < respuesta )
+ {
+ terminal.printf(" Es mas Bajo \r\n");
+ rojo = on;
+ verde = off;
+ goto Intenta;
+ }
+ if( secreto > respuesta )
+ {
+ terminal.printf(" Es mas Alto \r\n");
+ rojo = off;
+ verde = on;
+ goto Intenta;
+ }
+ if( secreto == respuesta )
+ {
+ terminal.printf(" CORRECTO!, Es igual a: %c \r\n",secreto);
+ rojo = off;
+ verde = on;
+ wait(1.0);
+ rojo = off;
+ verde = off;
+ wait(1.0);
+ rojo = off;
+ verde = on;
+ wait(1.0);
+ terminal.printf(" Eres un Genio !!! \r\n");
+ wait(1.0);
+ rojo = on;
+ verde = off;
+ wait(1.0);
+ rojo = off;
+ verde = on;
+ }
+ terminal.printf(" Quieres intentarlo de nuevo? \r\n");
+ terminal.printf(" 0 = No \r\n 1 = Si \r\n");
+ char opcion = terminal.getc();
+ if( opcion == '1' ) goto Inicio;
+ else if( opcion == '0' )
+ {
+ terminal.printf(" Eso es todo Amigos! \r\n");
+ break;
+ }
+ }
+}
+
+/* END main */
+
+/*
+................................................................................
+: Rutinas de los Vectores de Interrupción
+................................................................................
+*/
+
+/* END Events */
+/*
+________________________________________________________________________________
+|
+| Funciones Prototipo
+|_______________________________________________________________________________
+*/
+ // Las Funciones Prototipo van aquí !
+void Setup()
+{
+// terminal.baud(Baud_Rate); // Se configura la velocidad de transmisión e inicia la comunicación serial.
+ terminal.baud(115200); // Se configura la velocidad de transmisión e inicia la comunicación serial.
+ terminal.printf(" System is Wake Up!.\n\r");
+}
+
+/* END routines */
+
+/* END program */
+
+/* END documentation */
+/*
++--------------------------------------------------------------------------------
+| EJERCICIO
+|
+| 1.- Este programa tambien acepta letras o caracteres?
+| 2.- Modificar este programa para:
+| a) Que solo acepte números
+| b) Agregar un contador de Número de Intentos
+|
++--------------------------------------------------------------------------------
+|
+| EXAMEN
+|
+| 1.- Modificar el programa para que despliegue el número de intentos para
+| adivinar el número secreto.
+| 2.- Modificar el programa para haga eco con la respuesta que le introducimos.
+|
+| 3.- Modificar el programa para que el número secreto sea generado aleatoriamente.
+| a) Generar un Número Pseudo Aleatorio Mediante el Ticker
+| b) Utilizando la función RANDOMIZE
+| Suerte!
++--------------------------------------------------------------------------------
+|
+| T H E A N T U L I U S T E A M
+| Research, Development, Systems Equipment, Support & Spare Parts I n c.
+| (C) Copyright 1989-2014, All rigths Reserved
+|
+| This program is licensed under rules of
+| THE BEANERS TECHNOLOGIES PROYECT
++-------------------------------------------------------------------------------
+*/
+/* END Mbed */
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Sep 05 23:29:04 2019 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400 \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/stm32f103c8t6.h Thu Sep 05 23:29:04 2019 +0000 @@ -0,0 +1,4 @@ +#pragma once +#include "PinNames.h" +#include "SysClockConf.h" +