Revision 0:ff58cbebdb75, committed 2019-10-08

Comitter:

knasp

Date:

Tue Oct 08 18:55:32 2019 +0000

Commit message:

accelerometer not working long version

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MMA7660.lib	Tue Oct 08 18:55:32 2019 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/Sissors/code/MMA7660/#36a163511e34

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice.lib	Tue Oct 08 18:55:32 2019 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/mbed_official/code/USBDevice/#53949e6131f6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Oct 08 18:55:32 2019 +0000
@@ -0,0 +1,135 @@
+#include "mbed.h"
+#include "USBKeyboard.h"
+#include "MMA7660.h"
+
+MMA7660 MMA(p28, p27);
+USBKeyboard keyboard;
+DigitalOut connectionLed(LED1);
+
+MMA7660::MMA7660(PinName sda, PinName scl, bool active) : _i2c(sda, scl)
+
+{
+    setActive(active);
+    samplerate = 64;
+}          
+bool MMA7660::testConnection( void )
+{
+    if (_i2c.write(MMA7660_ADDRESS, NULL, 0) == 0 )
+        return true;
+    else
+        return false;
+}
+
+void MMA7660::setActive(bool state)
+{
+    active = state;
+    char modereg = read(MMA7660_MODE_R);
+    modereg &= ~(1<<0);
+
+    //If it somehow was in testmode, disable that
+    if (modereg && (1<<2)) {
+        modereg &= ~(1<<2);
+        write(MMA7660_MODE_R, modereg);
+    }
+
+    modereg += state;
+    write(MMA7660_MODE_R, modereg);
+}                                                              //MMA7660::MMA7660(PinName sda, PinName scl, bool active) : _i2c(sda, scl)
+int main()
+
+{
+    float x,y,z;
+    {
+        if (MMA.testConnection())
+            connectionLed = 1;
+    }
+    void MMA7660::setsamplerate (int samplerate)
+    {
+        bool active_old = active;
+        setActive(false);                               //Not allowed to be active to change anything
+        int rates[] = {120, 64, 32, 16, 8, 4, 2, 1};    //Allowed samplerates (and their number in array is also number required for MMA)
+        int sampleLoc = 0, sampleError = 10000, temp;
+        for (int i = 0; i<8; i++) {
+            temp = abs( rates[i] - samplerate );
+            if (temp<sampleError) {
+                sampleLoc = i;
+                sampleError=temp;
+            }
+        }
+        //Z1;                //variables to store acceleration values in X and Y
+
+
+    }
+    void MMA7660::readData(int *data) {
+        bool active_old = active;
+        if (!active) {
+            setActive(true);
+            wait(0.012 + 1/samplerate); //Wait until new sample is ready, my experience is that 1/samplerate isnt needed, but datasheet says so
+        }
+
+        char temp[3];
+        bool alert;
+
+        do {
+            alert = false;
+            read(MMA7660_XOUT_R, temp, 3);
+            for (int i = 0; i<3; i++) {
+                if (temp[i] > 63)
+                    alert = true;
+                if (temp[i] > 31)
+                    temp[i] += 128+64;
+                data[i] = (signed char)temp[i];
+            }
+        } while (alert);
+
+        if (!active_old)
+            setActive(false);
+
+
+    }
+    void MMA7660::readData(float *data) {
+        int intdata[3];
+        readData(intdata);
+        for (int i = 0; i<3; i++)
+            data[i] = intdata[i]/MMA7660_SENSITIVITY;
+    }
+
+    float MMA7660::x( void ) {
+        return getSingle(0);
+    }
+
+    float MMA7660::y( void ) {
+        return getSingle(1);
+    }
+
+    float MMA7660::z( void ) {
+        return getSingle(2);
+    }
+
+    MMA7660::Orientation MMA7660::getSide( void ) {
+        char tiltreg = read(MMA7660_TILT_R);
+        //We care about 2 LSBs
+        tiltreg &= 0x03;
+        if (tiltreg == 0x01)
+            return MMA7660::Front;
+        if (tiltreg == 0x02)
+            return MMA7660::Back;
+        return MMA7660::Unknown;
+    }
+
+    MMA7660::Orientation MMA7660::getOrientation( void ) {
+        char tiltreg = read(MMA7660_TILT_R);
+
+        //We care about bit 2, 3 and 4 (counting from zero)
+        tiltreg &= 0x07<<2;
+        tiltreg >>= 2;
+        if (tiltreg == 0x01)
+            return MMA7660::Left;
+        if (tiltreg == 0x02)
+            return MMA7660::Right;
+        if (tiltreg == 0x05)
+            return MMA7660::Down;
+        if (tiltreg == 0x06)
+            return MMA7660::Up;
+        return MMA7660::Unknown;
+    }

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Tue Oct 08 18:55:32 2019 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400
\ No newline at end of file