Johannes Stratmann

Important changes to forums and questions

All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.

11 years, 11 months ago.

JTAG with 1.27mm pitch

it would be great if EA could supply an adapter for the fine pitch JTAG connector. Now I have a LPC-Link2 and a nice LPC4088, but no cable :-( Is there an advantage for the 20-pin JTAG? Why not using the 6-pin SWD ?

Question relating to:

Last updated: 23 Apr 2019
The mbed-enabled LPC4088 QuickStart Board from Embedded Artists is a easy to use ARM Cortex-M4 rapid prototyping board in a standard through hole DIP package (44-pin), targeted at high-performance as …

1 Answer

EmbeddedArtists AB
11 years, 11 months ago.

The 20-pos connector has Trace capabilities. There is a 20-pos cable available which you can use to connect the LPC-Link 2 with the board.

Accepted Answer

thanks, that helps. I have not found this cable in the german webshop where I bought the EA products. But I have ordered already single connectors to make my own cable.These 50 mil pitch connectors are a not easy to find, especially the 14 pin plug.

posted by Johannes Stratmann 26 Dec 2013