Multitech xDOT

Mbed Compatibility

Mbed Enabled

  • Advanced

Mbed OS Support

  • Mbed OS 5.10
  • Mbed OS 5.11
  • Mbed OS 5.12
  • Mbed OS 5.13
  • Mbed OS 5.14
  • Mbed OS 5.8
  • Mbed OS 5.9

Use this module with Mbed

Overview

The MultiConnect® xDot™ is a secure, CE/FCC certified, ARM® mbed™ programmable, low-power RF module, that provides long-range, low bit rate M2M data connectivity to sensors, industrial equipment and remote appliances.

The MultiConnect xDot is LoRaWAN™ 1.0.1 compliant, providing bi-directional data communication up to 10 miles/ 15 km line-of-sight and 1-3 miles / 2 km into buildings, using sub-GHz ISM bands in North America and Europe.

xDots bring intelligence, reduced complexity and a lower overall bill of material cost to the very edge of the network while supporting a variety of electronic interfaces to connect just about any “Thing” for years on battery power.

Technical Specification

Target Core
  • Cortex-M3
Clock Speed 32Mhz
RAM 64KB
Flash 256KB
Hardware Interfaces
  • ADC (11)
  • DAC (2)
  • GPIO (19)
  • I2C (1)
  • SPI (1)
  • UART (2)
Antenna
  • Connector
Certification
  • AS/NZS (Australia and New Zealand)
  • CE (Europe)
  • FCC/CFR (USA)
  • IC RSS (Canada)
Communication
  • LoRa
Interface Firmware
  • DAPLink
Target Vendor and Part Number ST - STM32L151CCU6
Connectivity Vendor and Part Number Semtech - SX1272
Technical Documentation www.multitech.com
Retailers

Example Programs

You need to log in to post a discussion

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.

Access Warning

You do not have the correct permissions to perform this operation. Please, contact us at support@mbed.com to gain full access.

×