Mistake on this page?
Report an issue in GitHub or email us
Public Member Functions
PwmOut Class Reference

A pulse-width modulation digital output. More...

#include <PwmOut.h>

Public Member Functions

 PwmOut (PinName pin)
 Create a PwmOut connected to the specified pin. More...
 
 PwmOut (const PinMap &pinmap)
 Create a PwmOut connected to the specified pin. More...
 
void write (float value)
 Set the output duty-cycle, specified as a percentage (float) More...
 
float read ()
 Return the current output duty-cycle setting, measured as a percentage (float) More...
 
void period (float seconds)
 Set the PWM period, specified in seconds (float), keeping the duty cycle the same. More...
 
void period_ms (int ms)
 Set the PWM period, specified in milliseconds (int), keeping the duty cycle the same. More...
 
void period_us (int us)
 Set the PWM period, specified in microseconds (int), keeping the duty cycle the same. More...
 
void pulsewidth (float seconds)
 Set the PWM pulsewidth, specified in seconds (float), keeping the period the same. More...
 
void pulsewidth_ms (int ms)
 Set the PWM pulsewidth, specified in milliseconds (int), keeping the period the same. More...
 
void pulsewidth_us (int us)
 Set the PWM pulsewidth, specified in microseconds (int), keeping the period the same. More...
 
void suspend ()
 Suspend PWM operation. More...
 
void resume ()
 Resume PWM operation. More...
 
PwmOutoperator= (float value)
 A operator shorthand for write() More...
 
PwmOutoperator= (PwmOut &rhs)
 A operator shorthand for write() More...
 
 operator float ()
 An operator shorthand for read() More...
 

Detailed Description

A pulse-width modulation digital output.

Note
Synchronization level: Interrupt safe

Example

// Gradually change the intensity of the LED.
#include "mbed.h"
PwmOut led(LED1);
int main() {
while(1) {
led = led + 0.01;
wait(0.2);
if(led == 1.0) {
led = 0;
}
}
}

Definition at line 54 of file PwmOut.h.

Constructor & Destructor Documentation

PwmOut ( PinName  pin)

Create a PwmOut connected to the specified pin.

Parameters
pinPwmOut pin to connect to
PwmOut ( const PinMap pinmap)

Create a PwmOut connected to the specified pin.

Parameters
pinmapreference to structure which holds static pinmap.

Member Function Documentation

operator float ( )

An operator shorthand for read()

See also
PwmOut::read()

Definition at line 169 of file PwmOut.h.

PwmOut& operator= ( float  value)

A operator shorthand for write()

See also
PwmOut::write()

Definition at line 149 of file PwmOut.h.

PwmOut& operator= ( PwmOut rhs)

A operator shorthand for write()

See also
PwmOut::write()

Definition at line 159 of file PwmOut.h.

void period ( float  seconds)

Set the PWM period, specified in seconds (float), keeping the duty cycle the same.

Parameters
secondsChange the period of a PWM signal in seconds (float) without modifying the duty cycle
Note
The resolution is currently in microseconds; periods smaller than this will be set to zero.
void period_ms ( int  ms)

Set the PWM period, specified in milliseconds (int), keeping the duty cycle the same.

Parameters
msChange the period of a PWM signal in milliseconds without modifying the duty cycle
void period_us ( int  us)

Set the PWM period, specified in microseconds (int), keeping the duty cycle the same.

Parameters
usChange the period of a PWM signal in microseconds without modifying the duty cycle
void pulsewidth ( float  seconds)

Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.

Parameters
secondsChange the pulse width of a PWM signal specified in seconds (float)
void pulsewidth_ms ( int  ms)

Set the PWM pulsewidth, specified in milliseconds (int), keeping the period the same.

Parameters
msChange the pulse width of a PWM signal specified in milliseconds
void pulsewidth_us ( int  us)

Set the PWM pulsewidth, specified in microseconds (int), keeping the period the same.

Parameters
usChange the pulse width of a PWM signal specified in microseconds
float read ( )

Return the current output duty-cycle setting, measured as a percentage (float)

Returns
A floating-point value representing the current duty-cycle being output on the pin, measured as a percentage. The returned value will lie between 0.0f (representing on 0%) and 1.0f (representing on 100%).
Note
This value may not match exactly the value set by a previous write().
void resume ( )

Resume PWM operation.

Control the PWM state. This is primarily intended to resume PWM operations after a previous PwmOut::suspend call; This call restores the device state prior to suspension.

void suspend ( )

Suspend PWM operation.

Control the PWM state. This is primarily intended for temporary power-saving; This call can allow pwm to be temporarily disabled to permit power saving without losing device state. The subsequent function call must be PwmOut::resume for PWM to resume; any other calls prior to resuming are undefined behavior.

void write ( float  value)

Set the output duty-cycle, specified as a percentage (float)

Parameters
valueA floating-point value representing the output duty-cycle, specified as a percentage. The value should lie between 0.0f (representing on 0%) and 1.0f (representing on 100%). Values outside this range will be saturated to 0.0f or 1.0f.
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.