Mistake on this page?
Report an issue in GitHub or email us
Public Member Functions | Static Public Member Functions
QSPIFBlockDevice Class Reference

BlockDevice for SFDP based flash devices over QSPI bus. More...

#include <QSPIFBlockDevice.h>

Inheritance diagram for QSPIFBlockDevice:
BlockDevice

Public Member Functions

 QSPIFBlockDevice (PinName io0=NC, PinName io1=NC, PinName io2=NC, PinName io3=NC, PinName sclk=NC, PinName csel=NC, int clock_mode=0, int freq=40000000)
 Create QSPIFBlockDevice - An SFDP based Flash Block Device over QSPI bus. More...
 
virtual int init ()
 Initialize a block device. More...
 
virtual int deinit ()
 Deinitialize a block device. More...
 
 ~QSPIFBlockDevice ()
 Desctruct QSPIFBlockDevie. More...
 
virtual int read (void *buffer, mbed::bd_addr_t addr, mbed::bd_size_t size)
 Read blocks from a block device. More...
 
virtual int program (const void *buffer, mbed::bd_addr_t addr, mbed::bd_size_t size)
 Program blocks to a block device. More...
 
virtual int erase (mbed::bd_addr_t addr, mbed::bd_size_t size)
 Erase blocks on a block device. More...
 
virtual mbed::bd_size_t get_read_size () const
 Get the size of a readable block. More...
 
virtual mbed::bd_size_t get_program_size () const
 Get the size of a programable block. More...
 
virtual mbed::bd_size_t get_erase_size () const
 Get the size of a eraseable block. More...
 
virtual mbed::bd_size_t get_erase_size (mbed::bd_addr_t addr) const
 Get the size of minimal eraseable sector size of given address. More...
 
virtual int get_erase_value () const
 Get the value of storage byte after it was erased. More...
 
virtual mbed::bd_size_t size () const
 Get the total size of the underlying device. More...
 
virtual const char * get_type () const
 Get the BlockDevice class type. More...
 
virtual int sync ()
 Ensure data on storage is in sync with the driver. More...
 
virtual int trim (bd_addr_t addr, bd_size_t size)
 Mark blocks as no longer in use. More...
 
virtual bool is_valid_read (bd_addr_t addr, bd_size_t size) const
 Convenience function for checking block read validity. More...
 
virtual bool is_valid_program (bd_addr_t addr, bd_size_t size) const
 Convenience function for checking block program validity. More...
 
virtual bool is_valid_erase (bd_addr_t addr, bd_size_t size) const
 Convenience function for checking block erase validity. More...
 

Static Public Member Functions

static BlockDeviceget_default_instance ()
 Return the default block device. More...
 

Detailed Description

BlockDevice for SFDP based flash devices over QSPI bus.

// Here's an example using QSPI flash device on DISCO_L476VG target
#include "mbed.h"
#include "QSPIFBlockDevice.h"
QSPIFBlockDevice block_device(QSPI_FLASH1_IO0, QSPI_FLASH1_IO1, QSPI_FLASH1_IO2, QSPI_FLASH1_IO3,
QSPI_FLASH1_SCK, QSPI_FLASH1_CSN, QSPIF_POLARITY_MODE_0, MBED_CONF_QSPIF_QSPI_FREQ);
int main()
{
printf("QSPI SFDP Flash Block Device example\n");
// Initialize the SPI flash device and print the memory layout
block_device.init();
bd_size_t sector_size_at_address_0 = block_device.get_erase_size(0);
printf("QSPIF BD size: %llu\n", block_device.size());
printf("QSPIF BD read size: %llu\n", block_device.get_read_size());
printf("QSPIF BD program size: %llu\n", block_device.get_program_size());
printf("QSPIF BD erase size (at address 0): %llu\n", sector_size_at_address_0);
// Write "Hello World!" to the first block
char *buffer = (char *) malloc(sector_size_at_address_0);
sprintf(buffer, "Hello World!\n");
block_device.erase(0, sector_size_at_address_0);
block_device.program(buffer, 0, sector_size_at_address_0);
// Read back what was stored
block_device.read(buffer, 0, sector_size_at_address_0);
printf("%s", buffer);
// Deinitialize the device
block_device.deinit();
}

Definition at line 114 of file QSPIFBlockDevice.h.

Constructor & Destructor Documentation

QSPIFBlockDevice ( PinName  io0 = NC,
PinName  io1 = NC,
PinName  io2 = NC,
PinName  io3 = NC,
PinName  sclk = NC,
PinName  csel = NC,
int  clock_mode = 0,
int  freq = 40000000 
)

Create QSPIFBlockDevice - An SFDP based Flash Block Device over QSPI bus.

Parameters
io01st IO pin used for sending/receiving data during data phase of a transaction
io12nd IO pin used for sending/receiving data during data phase of a transaction
io23rd IO pin used for sending/receiving data during data phase of a transaction
io34th IO pin used for sending/receiving data during data phase of a transaction
sclkQSPI Clock pin
cselQSPI chip select pin
clock_modespecifies the QSPI Clock Polarity mode (QSPIF_POLARITY_MODE_0/QSPIF_POLARITY_MODE_1) default value = 0
freqClock frequency of the QSPI bus (defaults to 40MHz)

Desctruct QSPIFBlockDevie.

Definition at line 155 of file QSPIFBlockDevice.h.

Member Function Documentation

virtual int deinit ( )
virtual

Deinitialize a block device.

Returns
QSPIF_BD_ERROR_OK(0) - success QSPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed

Implements BlockDevice.

virtual int erase ( mbed::bd_addr_t  addr,
mbed::bd_size_t  size 
)
virtual

Erase blocks on a block device.

The state of an erased block is undefined until it has been programmed

Parameters
addrAddress of block to begin erasing
sizeSize to erase in bytes, must be a multiple of erase block size
Returns
QSPIF_BD_ERROR_OK(0) - success QSPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed QSPIF_BD_ERROR_READY_FAILED - Waiting for Memory ready failed or timed out QSPIF_BD_ERROR_WREN_FAILED - Write Enable failed QSPIF_BD_ERROR_PARSING_FAILED - unexpected format or values in one of the SFDP tables QSPIF_BD_ERROR_INVALID_ERASE_PARAMS - Trying to erase unaligned address or size

Reimplemented from BlockDevice.

static BlockDevice* get_default_instance ( )
staticinherited

Return the default block device.

Returns the default block device based on the configuration JSON. Use the components in target.json or application config to change the default block device.

An application can override all target settings by implementing BlockDevice::get_default_instance() - the default definition is weak, and calls get_target_default_instance().

virtual mbed::bd_size_t get_erase_size ( ) const
virtual

Get the size of a eraseable block.

Returns
Size of a minimal erase block, common to all regions, in bytes
Note
Must be a multiple of the program size

Reimplemented from BlockDevice.

virtual mbed::bd_size_t get_erase_size ( mbed::bd_addr_t  addr) const
virtual

Get the size of minimal eraseable sector size of given address.

Parameters
addrAny address within block queried for erase sector size (can be any address within flash size offset)
Returns
Size of minimal erase sector size, in given address region, in bytes
Note
Must be a multiple of the program size

Reimplemented from BlockDevice.

virtual int get_erase_value ( ) const
virtual

Get the value of storage byte after it was erased.

If get_erase_value returns a non-negative byte value, the underlying storage is set to that value when erased, and storage containing that value can be programmed without another erase.

Returns
The value of storage when erased, or -1 if you can't rely on the value of erased storage

Reimplemented from BlockDevice.

virtual mbed::bd_size_t get_program_size ( ) const
virtual

Get the size of a programable block.

Returns
Size of a program block size in bytes
Note
Must be a multiple of the read size

Implements BlockDevice.

virtual mbed::bd_size_t get_read_size ( ) const
virtual

Get the size of a readable block.

Returns
Size of a readable block in bytes

Implements BlockDevice.

virtual const char* get_type ( ) const
virtual

Get the BlockDevice class type.

Returns
A string represent the BlockDevice class type.

Implements BlockDevice.

virtual int init ( )
virtual

Initialize a block device.

Returns
QSPIF_BD_ERROR_OK(0) - success QSPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed QSPIF_BD_ERROR_READY_FAILED - Waiting for Memory ready failed or timedout QSPIF_BD_ERROR_PARSING_FAILED - unexpected format or values in one of the SFDP tables

Implements BlockDevice.

virtual bool is_valid_erase ( bd_addr_t  addr,
bd_size_t  size 
) const
virtualinherited

Convenience function for checking block erase validity.

Parameters
addrAddress of block to begin erasing
sizeSize to erase in bytes
Returns
True if erase is valid for underlying block device

Reimplemented in SlicingBlockDevice, and FlashIAPBlockDevice.

Definition at line 230 of file BlockDevice.h.

virtual bool is_valid_program ( bd_addr_t  addr,
bd_size_t  size 
) const
virtualinherited

Convenience function for checking block program validity.

Parameters
addrAddress of block to begin writing to
sizeSize to write in bytes
Returns
True if program is valid for underlying block device

Reimplemented in SlicingBlockDevice.

Definition at line 216 of file BlockDevice.h.

virtual bool is_valid_read ( bd_addr_t  addr,
bd_size_t  size 
) const
virtualinherited

Convenience function for checking block read validity.

Parameters
addrAddress of block to begin reading from
sizeSize to read in bytes
Returns
True if read is valid for underlying block device

Reimplemented in SlicingBlockDevice.

Definition at line 202 of file BlockDevice.h.

virtual int program ( const void *  buffer,
mbed::bd_addr_t  addr,
mbed::bd_size_t  size 
)
virtual

Program blocks to a block device.

The blocks must have been erased prior to being programmed

Parameters
bufferBuffer of data to write to blocks
addrAddress of block to begin writing to
sizeSize to write in bytes, must be a multiple of program block size
Returns
QSPIF_BD_ERROR_OK(0) - success QSPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed QSPIF_BD_ERROR_READY_FAILED - Waiting for Memory ready failed or timed out QSPIF_BD_ERROR_WREN_FAILED - Write Enable failed QSPIF_BD_ERROR_PARSING_FAILED - unexpected format or values in one of the SFDP tables

Implements BlockDevice.

virtual int read ( void *  buffer,
mbed::bd_addr_t  addr,
mbed::bd_size_t  size 
)
virtual

Read blocks from a block device.

Parameters
bufferBuffer to write blocks to
addrAddress of block to begin reading from
sizeSize to read in bytes, must be a multiple of read block size
Returns
QSPIF_BD_ERROR_OK(0) - success QSPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed

Implements BlockDevice.

virtual mbed::bd_size_t size ( ) const
virtual

Get the total size of the underlying device.

Returns
Size of the underlying device in bytes

Implements BlockDevice.

virtual int sync ( )
virtualinherited

Ensure data on storage is in sync with the driver.

Returns
0 on success or a negative error code on failure

Reimplemented in MBRBlockDevice, ChainingBlockDevice, ExhaustibleBlockDevice, SlicingBlockDevice, FlashSimBlockDevice, ObservingBlockDevice, ProfilingBlockDevice, BufferedBlockDevice, and ReadOnlyBlockDevice.

Definition at line 83 of file BlockDevice.h.

virtual int trim ( bd_addr_t  addr,
bd_size_t  size 
)
virtualinherited

Mark blocks as no longer in use.

This function provides a hint to the underlying block device that a region of blocks is no longer in use and may be erased without side effects. Erase must still be called before programming, but trimming allows flash-translation-layers to schedule erases when the device is not busy.

Parameters
addrAddress of block to mark as unused
sizeSize to mark as unused in bytes, must be a multiple of the erase block size
Returns
0 on success or a negative error code on failure

Reimplemented in SDBlockDevice, and BufferedBlockDevice.

Definition at line 137 of file BlockDevice.h.

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.