Mbed OS Reference | rda5981_flash.h Source File

 /* Copyright (c) 2019 Unisoc Communications Inc.
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 #ifndef _RDA5981_FLASH_H_
 #define _RDA5981_FLASH_H_
 
 #include "wland_types.h"
 
 /** This struct contains tx power parameter. */
 typedef struct
 {
     u8 b[14];
     u8 g[14];
     u8 n[14];
     u8 sum;
     u8 padding1;//alignment
 } wland_tx_power_t;
 
 /*
  *function: store reg and corresponding value related to test mode
  *@valid: 1 means data is valid
  *@flag: if biti(i=0~7) == 1, it means reg_val[i] is in use
  *@reg_val: store reg and value, reg_val[i][0] is reg, reg_val[i][1] ~ reg_val[i][14] is value
  */
 typedef struct {
     u32 valid;
     u32 flag;
     u16 reg_val[8][2];
 } wland_rf_t;
 
 typedef struct {
     u32 valid;
     u32 flag;
     u16 reg_val[8][15];
 } wland_rf_channels_t;
 
 typedef struct {
     u32 valid;
     u32 flag;
     u32 reg_val[8][2];
 } wland_phy_t;
 
 typedef struct {
     u32 valid;
     u32 flag;
     u32 reg_val[8][15];
 } wland_phy_channels_t;
 
 /* if you add or delete any macros below, modify RDA5991H_USER_DATA_FLAG_UNINITIALIZED at the same time */
 #define RDA5991H_USER_DATA_FLAG_MAC BIT0
 #define RDA5991H_USER_DATA_FLAG_STA BIT1
 #define RDA5991H_USER_DATA_FLAG_PMK BIT2
 #define RDA5991H_USER_DATA_FLAG_IP BIT3
 #define RDA5991H_USER_DATA_FLAG_PARTER_DATA_LEN BIT4
 #define RDA5991H_USER_DATA_FLAG_TX_POWER BIT5
 #define RDA5991H_USER_DATA_FLAG_XTAL_CAL BIT6
 #define RDA5991H_USER_DATA_FLAG_TX_POWER_RF BIT7
 #define RDA5991H_USER_DATA_FLAG_TX_POWER_PHY_GN BIT8
 #define RDA5991H_USER_DATA_FLAG_TX_POWER_PHY_B BIT9
 #define RDA5991H_USER_DATA_FLAG_AP BIT10
 #define RDA5991H_USER_DATA_FLAG_APNET BIT11
 #define RDA5991H_USER_DATA_FLAG_DHCP BIT12
 #define RDA5991H_USER_DATA_FLAG_UART BIT13
 #define RDA5991H_USER_DATA_FLAG_RF BIT14
 #define RDA5991H_USER_DATA_FLAG_RF_CHANNELS BIT15
 #define RDA5991H_USER_DATA_FLAG_PHY BIT16
 #define RDA5991H_USER_DATA_FLAG_PHY_CHANNELS BIT17
 #define RDA5991H_USER_DATA_FLAG_TX_POWER_OFFSET BIT18
 
 #define RDA5981_VBAT_CAL BIT0
 #define RDA5981_GPADC0_CAL BIT1
 #define RDA5981_GPADC1_CAL BIT2
 #define RDA5981_PRODUCT_ID BIT3
 #define RDA5981_POWER_CLASS BIT4
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 /*
  * function: read VBAT Calibration value
  * y = k * x + b
  * @k: slope
  * @b: offset
  * return: 0:success, else:fail
  */
 int rda5981_flash_read_vbat_cal(float *k, float *b);
 
 #ifdef __cplusplus
 }
 #endif
 #endif
Important Information for this Arm website
