Mistake on this page?
Report an issue in GitHub or email us
Data Structures | Typedefs | Enumerations | Functions | Variables
ble Namespace Reference

Entry namespace for all BLE API definitions. More...

Data Structures

struct  address_t
 MAC address data type. More...
 
struct  adv_data_appearance_t
 Enumeration of values for the adv_data_type_t::APPEARANCE. More...
 
struct  adv_data_flags_t
 Set of advertising flags. More...
 
struct  adv_data_type_t
 
class  AdvertisingDataBuilder
 Build advertising data. More...
 
class  AdvertisingDataParser
 Parse and iterate over advertising data. More...
 
class  AdvertisingDataSimpleBuilder
 Build advertising data. More...
 
struct  AdvertisingEndEvent
 Event produced when advertising ends. More...
 
class  AdvertisingParameters
 Parameters defining the advertising process. More...
 
struct  AdvertisingReportEvent
 Event generated when an advertising packet is seen during passive scanning or a scan response is received during active scanning. More...
 
struct  AdvertisingStartEvent
 Event produced when advertising start. More...
 
class  AP3CordioHCIDriver
 
class  AP3CordioHCITransportDriver
 
struct  att_security_requirement_t
 Security requirement that can be attached to an attribute operation. More...
 
struct  attribute_handle_range_t
 Inclusive range of GATT attributes handles. More...
 
class  BLE
 Abstract away BLE-capable radio transceivers or SOCs. More...
 
struct  Bounded
 Restrict values of an integer type to a defined range. More...
 
struct  buf_pool_desc_t
 Contain description of the memory pool used by the Cordio stack. More...
 
struct  byte_array_t
 Model fixed size array values. More...
 
struct  coded_symbol_per_bit_t
 Type describing the number of symbols per bit in le coded PHY. More...
 
struct  ConnectionCompleteEvent
 Event generated when a connection initiation ends (successfully or not). More...
 
class  ConnectionParameters
 Parameters defining the connection initiation process. More...
 
struct  ConnectionParametersUpdateCompleteEvent
 Event received when connection parameters have been updated. More...
 
struct  controller_supported_features_t
 Features supported by the controller. More...
 
class  CordioHCIDriver
 Base class of the HCI driver use by the BLE port of the Cordio stack. More...
 
class  CordioHCITransportDriver
 Base class of the HCI transport driver. More...
 
struct  DisconnectionCompleteEvent
 Event produced when a disconnection is complete. More...
 
struct  Duration
 Model BLE durations. More...
 
class  Gap
 Define device discovery, connection and link management procedures. More...
 
class  GattClient
 Define procedures required for interacting with a distant GATT server. More...
 
class  GattServer
 Construct and operates a GATT server. More...
 
class  H4TransportDriver
 Implementation of the H4 driver. More...
 
struct  io_capability_t
 Type that describe the IO capability of a device; it is used during Pairing Feature exchange. More...
 
struct  link_encryption_t
 Type that describes link's encryption state. More...
 
class  NRFCordioHCIDriver
 Nordic port of CordioHCIDriver. More...
 
class  NRFCordioHCITransportDriver
 Nordic port of CordioHCITransportDriver. More...
 
struct  pairing_failure_t
 Type that describe a pairing failure. More...
 
class  PasskeyAscii
 Passkey stored as a string of digits. More...
 
struct  peer_address_type_t
 Type that describes a peer device address type. More...
 
struct  PeriodicAdvertisingReportEvent
 Event generated when periodic advertising packet is received. More...
 
struct  PeriodicAdvertisingSyncEstablishedEvent
 Event generated when you first receive a periodic advertisement. More...
 
struct  PeriodicAdvertisingSyncLoss
 Event generated when periodic advertising sync is lost. More...
 
class  phy_set_t
 Type that describe a set of PHY(sical) transports. More...
 
struct  phy_t
 Type that describes a bluetooth PHY(sical) transport. More...
 
struct  random_address_type_t
 Type that describes a random device address type. More...
 
struct  SafeEnum
 Helper class used to define safe enumerations. More...
 
class  ScanParameters
 Parameters defining the scan process. More...
 
struct  ScanRequestEvent
 Event produced when a peer requests a scan response from the advertiser. More...
 
struct  ScanTimeoutEvent
 Event generated when scan times out. More...
 
class  SecurityManager
 Overview. More...
 
struct  UpdateConnectionParametersRequestEvent
 Event received when a peer wants to change the connection parameters. More...
 
struct  whitelist_t
 Representation of a whitelist of addresses. More...
 

Typedefs

typedef uintptr_t connection_handle_t
 Opaque reference to a connection. More...
 
typedef uint16_t attribute_handle_t
 Reference to an attribute in a GATT database. More...
 
typedef uint32_t passkey_num_t
 Passkey stored as a number. More...
 
typedef byte_array_t< 16 > irk_t
 128 bit keys used by paired devices More...
 
typedef byte_array_t< 2 > ediv_t
 Used to identify LTK for legacy pairing connections. More...
 
typedef byte_array_t< 16 > oob_tk_t
 Out of band data exchanged during pairing. More...
 
typedef byte_array_t< 16 > oob_lesc_value_t
 secure connections oob random 128 value More...
 
typedef byte_array_t< 16 > oob_confirm_t
 secure connections oob confirmation value More...
 
typedef byte_array_t< 16 > encryption_block_t
 data to be encrypted More...
 
typedef byte_array_t< 32 > public_key_coord_t
 public key coordinate, two of which define the public key More...
 
typedef byte_array_t< 32 > dhkey_t
 Diffie-Hellman key. More...
 
typedef uint32_t sign_count_t
 counter for signed data writes done by GattClient More...
 
typedef Duration< uint32_t, 1 > microsecond_t
 Type that represents micro seconds. More...
 
typedef Duration< uint32_t, 1000 *microsecond_t::TIME_BASEmillisecond_t
 Type that represents milliseconds. More...
 
typedef Duration< uint32_t, 1000 *millisecond_t::TIME_BASEsecond_t
 Type that represents seconds. More...
 
typedef FunctionPointerWithContext< const GattReadCallbackParams * > ReadCallback_t
 Attribute read event handler. More...
 
typedef CallChainOfFunctionPointersWithContext< const GattReadCallbackParams * > ReadCallbackChain_t
 Callchain of attribute read event handlers. More...
 
typedef FunctionPointerWithContext< const GattWriteCallbackParams * > WriteCallback_t
 Attribute write event handler. More...
 
typedef CallChainOfFunctionPointersWithContext< const GattWriteCallbackParams * > WriteCallbackChain_t
 Callchain of attribute write event handlers. More...
 

Enumerations

Functions

static attribute_handle_range_t attribute_handle_range (attribute_handle_t begin, attribute_handle_t end)
 Construct an attribute_handle_range_t from its first and last attribute handle. More...
 
template<class byte_array_class >
bool is_all_zeros (byte_array_class &byte_array)
 Returns true if every byte is equal to zero. More...
 
template<class byte_array_class >
void set_all_zeros (byte_array_class &byte_array)
 Zero out all bytes. More...
 
template<size_t Size>
Span< uint8_t, Size > make_Span (byte_array_t< Size > &src)
 Construct a fixed size Span from a byte_array_t. More...
 
template<size_t Size>
Span< const uint8_t, Size > make_const_Span (const byte_array_t< Size > &src)
 Construct a fixed size Span from a const byte_array_t. More...
 

Variables

static const advertising_handle_t LEGACY_ADVERTISING_HANDLE = 0x00
 Special advertising set handle used for the legacy advertising set. More...
 
static const advertising_handle_t INVALID_ADVERTISING_HANDLE = 0xFF
 Special advertising set handle used as return or parameter to signify an invalid handle. More...
 
static const uint8_t LEGACY_ADVERTISING_MAX_SIZE = 0x1F
 Maximum advertising data length that can fit in a legacy PDU. More...
 

Detailed Description

Entry namespace for all BLE API definitions.

Typedef Documentation

typedef uint16_t attribute_handle_t

Reference to an attribute in a GATT database.

Definition at line 95 of file common/BLETypes.h.

typedef uintptr_t connection_handle_t

Opaque reference to a connection.

Internally a connection handle is an unsigned integer capable of holding a pointer.

The real type (either a pointer to an object or an integer) is opaque for users and platform dependent.

Definition at line 90 of file common/BLETypes.h.

typedef byte_array_t<32> dhkey_t

Diffie-Hellman key.

Definition at line 472 of file common/BLETypes.h.

typedef byte_array_t<2> ediv_t

Used to identify LTK for legacy pairing connections.

Definition at line 457 of file common/BLETypes.h.

data to be encrypted

Definition at line 466 of file common/BLETypes.h.

typedef byte_array_t<16> irk_t

128 bit keys used by paired devices

Definition at line 452 of file common/BLETypes.h.

typedef Duration<uint32_t, 1> microsecond_t

Type that represents micro seconds.

Definition at line 298 of file Duration.h.

typedef Duration<uint32_t, 1000 * microsecond_t::TIME_BASE> millisecond_t

Type that represents milliseconds.

Definition at line 303 of file Duration.h.

secure connections oob confirmation value

Definition at line 463 of file common/BLETypes.h.

secure connections oob random 128 value

Definition at line 462 of file common/BLETypes.h.

typedef byte_array_t<16> oob_tk_t

Out of band data exchanged during pairing.

legacy pairing TK

Definition at line 461 of file common/BLETypes.h.

typedef uint32_t passkey_num_t

Passkey stored as a number.

Definition at line 239 of file common/BLETypes.h.

public key coordinate, two of which define the public key

Definition at line 469 of file common/BLETypes.h.

Attribute read event handler.

See also
GattClient::onDataRead().

Definition at line 457 of file gatt/GattCallbackParamTypes.h.

Callchain of attribute read event handlers.

Definition at line 462 of file gatt/GattCallbackParamTypes.h.

typedef Duration<uint32_t, 1000 * millisecond_t::TIME_BASE> second_t

Type that represents seconds.

Definition at line 308 of file Duration.h.

typedef uint32_t sign_count_t

counter for signed data writes done by GattClient

Definition at line 475 of file common/BLETypes.h.

Attribute write event handler.

See also
GattClient::onDataWrite().

Definition at line 469 of file gatt/GattCallbackParamTypes.h.

Callchain of attribute write event handlers.

See also
GattClient::onDataWrite().

Definition at line 476 of file gatt/GattCallbackParamTypes.h.

Enumeration Type Documentation

enum Keypress_t

events sent and received when passkey is being entered

Enumerator
KEYPRESS_STARTED 

Passkey entry started.

KEYPRESS_ENTERED 

Passkey digit entered.

KEYPRESS_ERASED 

Passkey digit erased.

KEYPRESS_CLEARED 

Passkey cleared.

KEYPRESS_COMPLETED 

Passkey entry completed.

Definition at line 906 of file common/BLETypes.h.

Function Documentation

static attribute_handle_range_t ble::attribute_handle_range ( attribute_handle_t  begin,
attribute_handle_t  end 
)
static

Construct an attribute_handle_range_t from its first and last attribute handle.

Parameters
[in]beginHandle at the beginning of the range.
[in]endHandle at the end of the range.
Returns
An instance of attribute_handle_range_t where attribute_handle_range_t::begin is equal to begin and attribute_handle_range_t::end is equal to end.
Note
This function is defined instead of a constructor to keep "POD-ness" of attribute_handle_range_t.

Definition at line 157 of file common/BLETypes.h.

bool ble::is_all_zeros ( byte_array_class &  byte_array)

Returns true if every byte is equal to zero.

Definition at line 316 of file common/BLETypes.h.

Span<const uint8_t, Size> ble::make_const_Span ( const byte_array_t< Size > &  src)

Construct a fixed size Span from a const byte_array_t.

Parameters
srcbyte_array_t to create a Span from.
Returns
A Span to src.

Definition at line 446 of file common/BLETypes.h.

Span<uint8_t, Size> ble::make_Span ( byte_array_t< Size > &  src)

Construct a fixed size Span from a byte_array_t.

Parameters
srcbyte_array_t to create a Span from.
Returns
A Span to src.

Definition at line 433 of file common/BLETypes.h.

void ble::set_all_zeros ( byte_array_class &  byte_array)

Zero out all bytes.

Definition at line 330 of file common/BLETypes.h.

Variable Documentation

const advertising_handle_t INVALID_ADVERTISING_HANDLE = 0xFF
static

Special advertising set handle used as return or parameter to signify an invalid handle.

Definition at line 48 of file common/BLETypes.h.

const advertising_handle_t LEGACY_ADVERTISING_HANDLE = 0x00
static

Special advertising set handle used for the legacy advertising set.

Definition at line 45 of file common/BLETypes.h.

const uint8_t LEGACY_ADVERTISING_MAX_SIZE = 0x1F
static

Maximum advertising data length that can fit in a legacy PDU.

Definition at line 51 of file common/BLETypes.h.

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.