Class implementation for unbuffered I/O for an interrupt driven application or one that needs to have more control. More...

#include <UnbufferedSerial.h>

Inheritance diagram for UnbufferedSerial:

Public Member Functions
	UnbufferedSerial (PinName tx, PinName rx, int baud=MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
	Create a serial port instance connected to the specified transmit and receive pins, with the specified baud rate. More...

	UnbufferedSerial (const serial_pinmap_t &static_pinmap, int baud=MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
	Create a UnbufferedSerial port, connected to the specified transmit and receive pins, with a particular baud rate. More...

ssize_t	write (const void *buffer, size_t size) override
	Write the contents of a buffer to a file. More...

ssize_t	read (void *buffer, size_t size) override
	Read the contents of a file into a buffer. More...

off_t	seek (off_t offset, int whence=SEEK_SET) override
	Move the file position to a given offset from from a given location. More...

off_t	size () override
	Get the size of the file. More...

int	isatty () override
	Check if the file in an interactive terminal device. More...

int	close () override
	Close a file. More...

short	poll (short events) const override
	Check for poll event flags Check the events listed in events to see if data can be read or written without blocking. More...

void	set_flow_control (Flow type, PinName flow1=NC, PinName flow2=NC)
	Set the flow control type on the serial port. More...

virtual int	sync ()
	Flush any buffers associated with the file. More...

virtual off_t	tell ()
	Get the file position of the file. More...

virtual void	rewind ()
	Rewind the file position to the beginning of the file. More...

virtual int	truncate (off_t length)
	Truncate or extend a file. More...

virtual int	set_blocking (bool blocking)
	Set blocking or nonblocking mode of the file operation like read/write. More...

virtual bool	is_blocking () const
	Check current blocking or nonblocking mode for file operations. More...

virtual int	enable_input (bool enabled)
	Enable or disable input. More...

virtual int	enable_output (bool enabled)
	Enable or disable output. More...

bool	writable () const
	Definition depends on the subclass implementing FileHandle. More...

bool	readable () const
	Definition depends on the subclass implementing FileHandle. More...

virtual void	sigio (Callback< void()> func)
	Register a callback on state change of the file. More...

Private Member Functions
void	baud (int baudrate)
	Set the baud rate of the serial port. More...

void	format (int bits=8, Parity parity=SerialBase::None, int stop_bits=1)
	Set the transmission format used by the serial port. More...

int	readable ()
	Determine if there is a character available to read. More...

int	writeable ()
	Determine if there is space available to write a character. More...

void	attach (Callback< void()> func, IrqType type=RxIrq)
	Attach a function to call whenever a serial interrupt is generated. More...

void	set_break ()
	Generate a break condition on the serial line NOTE: Clear break needs to run at least one frame after set_break is called. More...

void	clear_break ()
	Clear a break condition on the serial line NOTE: Should be run at least one frame after set_break is called. More...

void	send_break ()
	Generate a break condition on the serial line. More...

void	enable_input (bool enable=true)
	Enable serial input. More...

void	enable_output (bool enable=true)
	Enable serial output. More...

void	set_flow_control (Flow type, const serial_fc_pinmap_t &static_pinmap)
	Set the flow control type on the serial port. More...

int	write (const uint8_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_TX_COMPLETE)
	Begin asynchronous write using 8bit buffer. More...

int	write (const uint16_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_TX_COMPLETE)
	Begin asynchronous write using 16bit buffer. More...

void	abort_write ()
	Abort the on-going write transfer. More...

int	read (uint8_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_RX_COMPLETE, unsigned char char_match=SERIAL_RESERVED_CHAR_MATCH)
	Begin asynchronous reading using 8bit buffer. More...

int	read (uint16_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_RX_COMPLETE, unsigned char char_match=SERIAL_RESERVED_CHAR_MATCH)
	Begin asynchronous reading using 16bit buffer. More...

void	abort_read ()
	Abort the on-going read transfer. More...

int	set_dma_usage_tx (DMAUsage usage)
	Configure DMA usage suggestion for non-blocking TX transfers. More...

int	set_dma_usage_rx (DMAUsage usage)
	Configure DMA usage suggestion for non-blocking RX transfers. More...

Detailed Description

Class implementation for unbuffered I/O for an interrupt driven application or one that needs to have more control.

Definition at line 47 of file UnbufferedSerial.h.

Member Function Documentation

virtual int enable_input ( bool enabled )

virtualinherited

Enable or disable input.

Control enabling of device for input. This is primarily intended for temporary power-saving; the overall ability of the device to operate for input and/or output may be fixed at creation time, but this call can allow input to be temporarily disabled to permit power saving without losing device state.

Parameters

enabled true to enable input, false to disable.

Returns: 0 on success; Negative error code on failure

Reimplemented in BufferedSerial.

Definition at line 192 of file FileHandle.h.

virtual int enable_output ( bool enabled )

virtualinherited

Enable or disable output.

Control enabling of device for output. This is primarily intended for temporary power-saving; the overall ability of the device to operate for input and/or output may be fixed at creation time, but this call can allow output to be temporarily disabled to permit power saving without losing device state.

Parameters

enabled true to enable output, false to disable.

Returns: 0 on success; Negative error code on failure

Reimplemented in BufferedSerial.

Definition at line 210 of file FileHandle.h.

virtual bool is_blocking ( ) const

virtualinherited

Check current blocking or nonblocking mode for file operations.

Returns: true for blocking mode, false for nonblocking mode.

Reimplemented in BufferedSerial.

Definition at line 174 of file FileHandle.h.

bool readable ( ) const

inherited

Definition depends on the subclass implementing FileHandle.

For example, if the FileHandle is of type Stream, readable() could return true when there is something available to read.

Returns: true when there is something available to read.

Definition at line 248 of file FileHandle.h.

virtual void rewind ( )

virtualinherited

Rewind the file position to the beginning of the file.

Note: This is equivalent to seek(0, SEEK_SET)

Reimplemented in File, and Stream.

Definition at line 130 of file FileHandle.h.

virtual int set_blocking ( bool blocking )

virtualinherited

Set blocking or nonblocking mode of the file operation like read/write.

Definition depends on the subclass implementing FileHandle. The default is blocking.

Parameters

blocking true for blocking mode, false for nonblocking mode.

Returns: 0 on success; Negative error code on failure

Reimplemented in BufferedSerial.

Definition at line 165 of file FileHandle.h.

virtual void sigio ( Callback< void()> func )

virtualinherited

Register a callback on state change of the file.

The specified callback will be called on state changes such as when the file can be written to or read from.

The callback may be called in an interrupt context and should not perform expensive operations.

Note! This is not intended as an attach-like asynchronous API, but rather as a building block for constructing such functionality.

The exact timing of when the registered function is called is not guaranteed and is susceptible to change. It should be used as a cue to make read/write/poll calls to find the current state.

Parameters

func	Function to call on state change

Reimplemented in BufferedSerial.

Definition at line 270 of file FileHandle.h.

virtual int sync ( )

virtualinherited

Flush any buffers associated with the file.

Returns: 0 on success, negative error code on failure

Reimplemented in BufferedSerial, File, and Stream.

Definition at line 99 of file FileHandle.h.

virtual off_t tell ( )

virtualinherited

Get the file position of the file.

Note: This is equivalent to seek(0, SEEK_CUR)

Returns: The current offset in the file, negative error code on failure

Reimplemented in File, and Stream.

Definition at line 121 of file FileHandle.h.

virtual int truncate ( off_t length )

virtualinherited

Truncate or extend a file.

The file's length is set to the specified value. The seek pointer is not changed. If the file is extended, the extended area appears as if it were zero-filled.

Parameters

length The requested new length for the file

Returns: Zero on success, negative error code on failure

Reimplemented in File, and TestFile< FILE_SIZE >.

Definition at line 151 of file FileHandle.h.

bool writable ( ) const

inherited

Definition depends on the subclass implementing FileHandle.

For example, if the FileHandle is of type Stream, writable() could return true when there is ample buffer space available for write() calls.

Returns: true if the FileHandle is writable.

Definition at line 237 of file FileHandle.h.

Public Member Functions

Private Member Functions

Detailed Description

Member Function Documentation

Important Information for this Arm website