A digital interrupt input, used to call a function on a rising or falling edge. More...

#include <InterruptIn.h>

Inheritance diagram for InterruptIn:

Public Member Functions
	InterruptIn (PinName pin)
	Create an InterruptIn connected to the specified pin. More...

	InterruptIn (PinName pin, PinMode mode)
	Create an InterruptIn connected to the specified pin, and the pin configured to the specified mode. More...

int	read ()
	Read the input, represented as 0 or 1 (int) More...

	operator int ()
	An operator shorthand for read() More...

void	rise (Callback< void()> func)
	Attach a function to call when a rising edge occurs on the input. More...

void	fall (Callback< void()> func)
	Attach a function to call when a falling edge occurs on the input. More...

void	mode (PinMode pull)
	Set the input pin mode. More...

void	enable_irq ()
	Enable IRQ. More...

void	disable_irq ()
	Disable IRQ. More...

Detailed Description

A digital interrupt input, used to call a function on a rising or falling edge.

Note: Synchronization level: Interrupt safe

Example:

// Flash an LED while waiting for events
#include "mbed.h"
InterruptIn event(p16);
DigitalOut led(LED1);
void trigger() {
    printf("triggered!\n");
}
int main() {
    // register trigger() to be called upon the rising edge of event
    event.rise(&trigger);
    while(1) {
        led = !led;
        ThisThread::sleep_for(250);
    }
}

Definition at line 65 of file InterruptIn.h.

Constructor & Destructor Documentation

InterruptIn ( PinName pin )

Create an InterruptIn connected to the specified pin.

Parameters

pin	InterruptIn pin to connect to

InterruptIn	(	PinName	pin,
		PinMode	mode
	)

Create an InterruptIn connected to the specified pin, and the pin configured to the specified mode.

Parameters

pin	InterruptIn pin to connect to
mode	Desired Pin mode configuration. (Valid values could be PullNone, PullDown, PullUp and PullDefault. See PinNames.h for your target for definitions)

Member Function Documentation

void disable_irq ( )

Disable IRQ.

This method depends on hardware implementation, might disable one port interrupts. For further information, check gpio_irq_disable().

void enable_irq ( )

Enable IRQ.

This method depends on hardware implementation, might enable one port interrupts. For further information, check gpio_irq_enable().

void fall ( Callback< void()> func )

Attach a function to call when a falling edge occurs on the input.

Parameters

func	A pointer to a void function, or 0 to set as none

void mode ( PinMode pull )

Set the input pin mode.

Parameters

pull	PullUp, PullDown, PullNone, PullDefault See PinNames.h for your target for definitions)

operator int ( )

An operator shorthand for read()

int read ( )

Read the input, represented as 0 or 1 (int)

Returns: An integer representing the state of the input pin, 0 for logical 0, 1 for logical 1

void rise ( Callback< void()> func )

Attach a function to call when a rising edge occurs on the input.

Parameters

func	A pointer to a void function, or 0 to set as none

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Important Information for this Arm website