Typedefs
typedef void(*	PalRadioTxComp_t) (PalRadioStatus_t status)
	Tx completion call signature. More...

typedef void(*	PalRadioRxComp_t) (PalRadioStatus_t status, uint32_t tstamp, PalRadioPhy_t phy, int8_t rssi)
	Rx completion call signature. More...

Enumerations

Functions
void	PalRadioInitPathComp (void)
	Initialize RF path compensation. More...

int8_t	PalRadioGetActualTxPower (int8_t txPwr, uint8_t compFlag)
	Get the actual Tx power at the antenna (expressed in 1dBm units). More...

int8_t	PalRadioIncreasePower (int8_t reqPwr, int8_t delta)
	Request an increase in power. More...

int8_t	PalRadioGetAcceptablePowerReduction (int8_t txPwr)
	Get the next acceptable power reduction step. More...

uint8_t	PalRadioWriteRfPathComp (int16_t txPathComp, int16_t rxPathComp)
	Set RF path compensation. More...

void	PalRadioGetSupTxPower (int8_t pMinTxPwr, int8_t pMaxTxPwr)
	Get supported transmit power. More...

void	PalRadioReadRfPathComp (int16_t pTxPathComp, int16_t pRxPathComp)
	Read RF path compensation. More...

int8_t	PalRadioGetRxRfPathComp (void)
	Get receive RF path compensation. More...

Detailed Description

Typedef Documentation

typedef void(* PalRadioRxComp_t) (PalRadioStatus_t status, uint32_t tstamp, PalRadioPhy_t phy, int8_t rssi)

Rx completion call signature.

Definition at line 77 of file pal_radio2.h.

typedef void(* PalRadioTxComp_t) (PalRadioStatus_t status)

Tx completion call signature.

Definition at line 74 of file pal_radio2.h.

Enumeration Type Documentation

enum PalRadioPhy_t

Enumerator
PAL_RADIO_PHY_1M	1M PHY.
PAL_RADIO_PHY_2M	2M PHY.
PAL_RADIO_PHY_CODED_DEFAULT	Coded with options not specified.
PAL_RADIO_PHY_CODED_S2	Coded S2 PHY (500-kbps).
PAL_RADIO_PHY_CODED_S8	Coded S8 PHY (128-kbps).

Definition at line 64 of file pal_radio2.h.

enum PalRadioState_t

Enumerator
PAL_RADIO_STATE_UNINIT	Uninitialized state.
PAL_RADIO_STATE_ERROR	Error state.
PAL_RADIO_STATE_IDLE	Idle state.
PAL_RADIO_STATE_TX	Tx state.
PAL_RADIO_STATE_RX	Rx state.
PAL_RADIO_STATE_DIAG	Diagnostics state.

Definition at line 46 of file pal_radio2.h.

enum PalRadioStatus_t

Enumerator
PAL_RADIO_STATUS_SUCCESS	Operation completed successfully.
PAL_RADIO_STATUS_FAILED	General failure.
PAL_RADIO_STATUS_TIMEOUT	Rx timed out.
PAL_RADIO_STATUS_CRC_FAILED	Rx CRC match failed.

Definition at line 56 of file pal_radio2.h.

Function Documentation

int8_t PalRadioGetAcceptablePowerReduction ( int8_t txPwr )

Get the next acceptable power reduction step.

Parameters

txPwr Tx Power(expressed in 1dBm units).

Returns: Lowest acceptable power reduction size.

int8_t PalRadioGetActualTxPower	(	int8_t	txPwr,
		uint8_t	compFlag
	)

Get the actual Tx power at the antenna (expressed in 1dBm units).

Parameters

txPwr	Tx power provided by the host (expressed in 1dBm units).
compFlag	Flag to apply Tx path compensation or not.

Returns: Actual Tx power at the antenna (expressed in 1dBm units).

Tx path compensation is only used for extended ADV header. Compensation is not considered when filling in HCI events.

int8_t PalRadioGetRxRfPathComp ( void )

Get receive RF path compensation.

Returns: Transmit RF path compensation (in 1-dBm units).

void PalRadioGetSupTxPower	(	int8_t *	pMinTxPwr,
		int8_t *	pMaxTxPwr
	)

Get supported transmit power.

Parameters

pMinTxPwr	Return buffer for minimum transmit power (expressed in 1dBm units).
pMaxTxPwr	Return buffer for maximum transmit power (expressed in 1dBm units).

int8_t PalRadioIncreasePower	(	int8_t	reqPwr,
		int8_t	delta
	)

Request an increase in power.

Parameters

reqPwr	Requested Power.
delta	Delta

Returns

TxPower to be set

        If increasing power: the controller will increase one step if possible.
        If decreasing power: the controller will only decrease to the ceiling step.

void PalRadioInitPathComp ( void )

Initialize RF path compensation.

void PalRadioReadRfPathComp	(	int16_t *	pTxPathComp,
		int16_t *	pRxPathComp
	)

Read RF path compensation.

Parameters

pTxPathComp	Return buffer for RF transmit path compensation value (expressed in 0.1dBm units).
pRxPathComp	Return buffer for RF receive path compensation value (expressed in 0.1dBm units).

uint8_t PalRadioWriteRfPathComp	(	int16_t	txPathComp,
		int16_t	rxPathComp
	)

Set RF path compensation.

Parameters

txPathComp	RF transmit path compensation value (expressed in 0.1dBm units).
rxPathComp	RF receive path compensation value (expressed in 0.1dBm units).

Returns: TRUE if successful, FALSE otherwise.

Typedefs

Enumerations

Functions

Detailed Description

Typedef Documentation

Enumeration Type Documentation

Function Documentation

Important Information for this Arm website