Mbed OS Reference | FlashSimBlockDevice.h Source File

 /* mbed Microcontroller Library
  * Copyright (c) 2018 ARM Limited
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
  * in the Software without restriction, including without limitation the rights
  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  * copies of the Software, and to permit persons to whom the Software is
  * furnished to do so, subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in
  * all copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
 
 /** \addtogroup storage */
 /** @{*/
 
 #ifndef MBED_FLASH_SIM_BLOCK_DEVICE_H
 #define MBED_FLASH_SIM_BLOCK_DEVICE_H
 
 #include "BlockDevice.h"
 
 namespace mbed {
 
 enum {
     BD_ERROR_NOT_ERASED       = -3201,
 };
 
 /** Flash simulating block device
  *
  * Flash simulation BD adaptor
  *
  */
 class FlashSimBlockDevice : public BlockDevice {
 public:
 
     /** Constructor
      *
      * @param bd           Block device to back the FlashSimBlockDevice
      * @param erase_value  Value stored in a block after it's erased
      */
     FlashSimBlockDevice(BlockDevice *bd, uint8_t erase_value = 0xFF);
     virtual ~FlashSimBlockDevice();
 
     /** Initialize a block device
      *
      *  @return         0 on success or a negative error code on failure
      */
     virtual int init();
 
     /** Deinitialize the block device
      *
      *  @return         0 on success or a negative error code on failure
      */
     virtual int deinit();
 
     /** Ensure data on storage is in sync with the driver
      *
      *  @return         0 on success or a negative error code on failure
      */
     virtual int sync();
 
     /** Read blocks from the block device
      *
      *  @param buffer   Buffer to read blocks into
      *  @param addr     Address of block to begin reading from
      *  @param size     Size to read in bytes, must be a multiple of read block size
      *  @return         0 on success, negative error code on failure
      */
     virtual int read(void *buffer, bd_addr_t addr, bd_size_t size);
 
     /** Program blocks to the block device
      *
      *  The blocks must have been erased prior to being programmed
      *
      *  @param buffer   Buffer of data to write to blocks
      *  @param addr     Address of block to begin writing to
      *  @param size     Size to write in bytes, must be a multiple of program block size
      *  @return         0 on success, negative error code on failure
      */
     virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size);
 
     /** Erase blocks on the block device
      *
      *  Required before any write to these addresses
      *
      *  @param addr     Address of block to begin erasing
      *  @param size     Size to erase in bytes, must be a multiple of erase block size
      *  @return         0 on success, negative error code on failure
      */
     virtual int erase(bd_addr_t addr, bd_size_t size);
 
     /** Get the size of a readable block
      *
      *  @return         Size of a readable block in bytes
      */
     virtual bd_size_t get_read_size() const;
 
     /** Get the size of a programmable block
      *
      *  @return         Size of a programmable block in bytes
      */
     virtual bd_size_t get_program_size() const;
 
     /** Get the size of an erasable block
      *
      *  @return         Size of an erasable block in bytes
      */
     virtual bd_size_t get_erase_size() const;
 
     /** Get the size of an erasable block given address
      *
      *  @param addr     Address within the erasable block
      *  @return         Size of an erasable block in bytes
      *  @note Must be a multiple of the program size
      */
     virtual bd_size_t get_erase_size(bd_addr_t addr) const;
 
     /** Get the value of storage when erased
      *
      *  @return         The value of storage when erased
      */
     virtual int get_erase_value() const;
 
     /** Get the total size of the underlying device
      *
      *  @return         Size of the underlying device in bytes
      */
     virtual bd_size_t size() const;
 
     /** Get the BlockDevice class type.
      *
      *  @return         A string represent the BlockDevice class type.
      */
     virtual const char *get_type() const;
 
 private:
     uint8_t _erase_value;
     bd_size_t _blank_buf_size;
     uint8_t *_blank_buf;
     BlockDevice *_bd;
     uint32_t _init_ref_count;
     bool _is_initialized;
 };
 
 } // namespace mbed
 
 // Added "using" for backwards compatibility
 #ifndef MBED_NO_GLOBAL_USING_DIRECTIVE
 using mbed::FlashSimBlockDevice;
 #endif
 
 #endif
 
 /** @}*/
Important Information for this Arm website
