Serial Flash Discoverable Parameters. More...

Data Structures
struct	sfdp_bptbl_info
	JEDEC Basic Flash Parameter Table info. More...

struct	sfdp_smptbl_info
	JEDEC Sector Map Table info. More...

struct	sfdp_fbatbl_info
	JEDEC 4-byte Address Instruction Parameter Table info. More...

struct	sfdp_hdr_info
	SFDP JEDEC Parameter Table info. More...

Functions
int	sfdp_parse_headers (Callback< int(bd_addr_t, sfdp_cmd_addr_size_t, uint8_t, uint8_t, void *, bd_size_t)> sfdp_reader, sfdp_hdr_info &sfdp_info)
	Parse SFDP Database Retrieves all headers from within a memory device and parses the information contained by the headers. More...

int	sfdp_parse_sector_map_table (Callback< int(bd_addr_t, sfdp_cmd_addr_size_t, uint8_t, uint8_t, void *, bd_size_t)> sfdp_reader, sfdp_hdr_info &sfdp_info)
	Parse Sector Map Parameter Table Retrieves the table from a device and parses the information contained by the table. More...

size_t	sfdp_detect_page_size (uint8_t *bptbl_ptr, size_t bptbl_size)
	Detect page size used for writing on flash. More...

int	sfdp_detect_erase_types_inst_and_size (uint8_t *bptbl_ptr, sfdp_hdr_info &sfdp_info)
	Detect all supported erase types. More...

int	sfdp_find_addr_region (bd_addr_t offset, const sfdp_hdr_info &sfdp_info)
	Find the region to which the given offset belongs to. More...

int	sfdp_iterate_next_largest_erase_type (uint8_t bitfield, bd_size_t size, bd_addr_t offset, int region, const sfdp_smptbl_info &smptbl)
	Finds the largest Erase Type of the Region to which the offset belongs to. More...

int	sfdp_detect_device_density (uint8_t *bptbl_ptr, sfdp_bptbl_info &bptbl_info)
	Detect device density. More...

int	sfdp_detect_addressability (uint8_t *bptbl_ptr, sfdp_bptbl_info &bptbl_info)
	Detect is it possible to access the whole memory region. More...

Variables
constexpr int	SFDP_HEADER_SIZE = 8
	Size of an SFDP header in bytes, 2 DWORDS. More...

constexpr int	SFDP_BASIC_PARAMS_TBL_SIZE = 80
	Basic Parameter Table size in bytes, 20 DWORDS. More...

constexpr int	SFDP_SECTOR_MAP_MAX_REGIONS = 10
	Maximum number of regions with different erase granularity. More...

constexpr int	SFDP_ERASE_BITMASK_TYPE4 = 0x08
	Erase type 4 (erase granularity) identifier. More...

constexpr int	SFDP_ERASE_BITMASK_TYPE3 = 0x04
	Erase type 3 (erase granularity) identifier. More...

constexpr int	SFDP_ERASE_BITMASK_TYPE2 = 0x02
	Erase type 2 (erase granularity) identifier. More...

constexpr int	SFDP_ERASE_BITMASK_TYPE1 = 0x01
	Erase type 1 (erase granularity) identifier. More...

constexpr int	SFDP_ERASE_BITMASK_NONE = 0x00
	Erase type None. More...

constexpr int	SFDP_ERASE_BITMASK_ALL = 0x0F
	Erase type All. More...

constexpr int	SFDP_MAX_NUM_OF_ERASE_TYPES = 4
	Maximum number of different erase types (erase granularity) More...

Detailed Description

Serial Flash Discoverable Parameters.

Based on JESD216D.01 Standard.

Function Documentation

int mbed::sfdp_detect_addressability	(	uint8_t *	bptbl_ptr,
		sfdp_bptbl_info &	bptbl_info
	)

Detect is it possible to access the whole memory region.

Parameters

bptbl_ptr	Pointer to memory holding a Basic Parameter Table structure
bptbl_info	Basic Parameter Table information structure

Returns: 0 on success, negative error code on failure

int mbed::sfdp_detect_device_density	(	uint8_t *	bptbl_ptr,
		sfdp_bptbl_info &	bptbl_info
	)

Detect device density.

Parameters

bptbl_ptr	Pointer to memory holding a Basic Parameter Table structure
bptbl_info	Basic Parameter Table information structure

Returns: 0 on success, negative error code on failure

int mbed::sfdp_detect_erase_types_inst_and_size	(	uint8_t *	bptbl_ptr,
		sfdp_hdr_info &	sfdp_info
	)

Detect all supported erase types.

Parameters

	bptbl_ptr	Pointer to memory holding a JEDEC Basic Flash Parameter Table
[in,out]	sfdp_info	Contains the results of parsing erase type instructions and sizes

Returns: MBED_SUCCESS on success, negative error code on failure

size_t mbed::sfdp_detect_page_size	(	uint8_t *	bptbl_ptr,
		size_t	bptbl_size
	)

Detect page size used for writing on flash.

Parameters

bptbl_ptr	Pointer to memory holding a Basic Parameter Table structure
bptbl_size	Size of memory holding the Basic Parameter Table

Returns: Page size

int mbed::sfdp_find_addr_region	(	bd_addr_t	offset,
		const sfdp_hdr_info &	sfdp_info
	)

Find the region to which the given offset belongs to.

Parameters

offset	Offset value
sfdp_info	Region information

Returns: Region number

int mbed::sfdp_iterate_next_largest_erase_type	(	uint8_t	bitfield,
		bd_size_t	size,
		bd_addr_t	offset,
		int	region,
		const sfdp_smptbl_info &	smptbl
	)

Finds the largest Erase Type of the Region to which the offset belongs to.

Iterates from highest type to lowest.

Parameters

bitfield	Erase types bit field
size	Upper limit for region size
offset	Offset value
region	Region number
smptbl	Information about different erase types

Returns: Largest erase type, or -1 if none matches the given address and size

int mbed::sfdp_parse_headers	(	Callback< int(bd_addr_t, sfdp_cmd_addr_size_t, uint8_t, uint8_t, void *, bd_size_t)>	sfdp_reader,
		sfdp_hdr_info &	sfdp_info
	)

Parse SFDP Database Retrieves all headers from within a memory device and parses the information contained by the headers.

Only JEDEC headers are parsed, not vendor specific ones.

Parameters

	sfdp_reader	Callback function used to read headers from within a device
[out]	sfdp_info	Contains the results of parsing the SFDP Database JEDEC headers

Returns: MBED_SUCCESS on success, negative error code on failure

int mbed::sfdp_parse_sector_map_table	(	Callback< int(bd_addr_t, sfdp_cmd_addr_size_t, uint8_t, uint8_t, void *, bd_size_t)>	sfdp_reader,
		sfdp_hdr_info &	sfdp_info
	)

Parse Sector Map Parameter Table Retrieves the table from a device and parses the information contained by the table.

Parameters

	sfdp_reader	Callback function used to read headers from within a device
[out]	sfdp_info	Contains the results of parsing the JEDEC Sector Map Table

Returns: MBED_SUCCESS on success, negative error code on failure

Variable Documentation

constexpr int SFDP_BASIC_PARAMS_TBL_SIZE = 80

Basic Parameter Table size in bytes, 20 DWORDS.

Definition at line 37 of file SFDP.h.

constexpr int SFDP_ERASE_BITMASK_ALL = 0x0F

Erase type All.

Definition at line 46 of file SFDP.h.

constexpr int SFDP_ERASE_BITMASK_NONE = 0x00

Erase type None.

Definition at line 45 of file SFDP.h.

constexpr int SFDP_ERASE_BITMASK_TYPE1 = 0x01

Erase type 1 (erase granularity) identifier.

Definition at line 44 of file SFDP.h.

constexpr int SFDP_ERASE_BITMASK_TYPE2 = 0x02

Erase type 2 (erase granularity) identifier.

Definition at line 43 of file SFDP.h.

constexpr int SFDP_ERASE_BITMASK_TYPE3 = 0x04

Erase type 3 (erase granularity) identifier.

Definition at line 42 of file SFDP.h.

constexpr int SFDP_ERASE_BITMASK_TYPE4 = 0x08

Erase type 4 (erase granularity) identifier.

Definition at line 41 of file SFDP.h.

constexpr int SFDP_HEADER_SIZE = 8

Size of an SFDP header in bytes, 2 DWORDS.

Definition at line 36 of file SFDP.h.

constexpr int SFDP_MAX_NUM_OF_ERASE_TYPES = 4

Maximum number of different erase types (erase granularity)

Definition at line 48 of file SFDP.h.

constexpr int SFDP_SECTOR_MAP_MAX_REGIONS = 10

Maximum number of regions with different erase granularity.

Definition at line 38 of file SFDP.h.

Data Structures

Functions

Variables

Detailed Description

Function Documentation

Variable Documentation

Important Information for this Arm website