Data Structures | |
| struct | attCfg_t |
| ATT run-time configurable parameters. More... | |
| struct | eattCfg_t |
| EATT run-time configurable parameters. More... | |
| struct | attEvt_t |
| ATT callback event. More... | |
| struct | eattTuple_t |
| EATT multiple notify tuple structure. More... | |
Typedefs | |
| typedef void(* | attCback_t) (attEvt_t *pEvt) |
| ATT event callback type. More... | |
ATT Callback Events | |
| #define | ATT_CBACK_START 0x02 |
| ATT callback event starting value. More... | |
| #define | ATT_CBACK_END ATT_EATT_RECONFIG_CMPL_IND |
| ATT callback events. More... | |
ATT Client Awareness of Database Change | |
ATT Setup Functions | |
| void | AttRegister (attCback_t cback) |
| Register a callback with ATT. This callback will be used for messages from both ATTC and ATTS. More... | |
| void | AttConnRegister (dmCback_t cback) |
| Register a connection callback with ATT. The callback is typically used to manage the attribute server database. More... | |
ATT Parameter Functions | |
Functions specific to a connection between 2 devices. Functions may be called by either Client or server. | |
| uint16_t | AttGetMtu (dmConnId_t connId) |
| Get the attribute protocol MTU of a connection. More... | |
ATT Message Passing Functions | |
| void * | AttMsgAlloc (uint16_t len, uint8_t opcode) |
| Allocate an ATT message buffer to be sent with the ATT attribute protocol zero-copy APIs. More... | |
| void | AttMsgFree (void *pMsg, uint8_t opcode) |
| Free an ATT message buffer allocated with AttMsgAlloc(). More... | |
ATT PDU Format | |
| #define | ATT_HDR_LEN 1 |
| Attribute PDU header length. More... | |
| #define | ATT_AUTH_SIG_LEN 12 |
| Authentication signature length. More... | |
| #define | ATT_DEFAULT_MTU 23 |
| Default value of ATT_MTU. More... | |
| #define | ATT_MAX_MTU 517 |
| Maximum value of ATT_MTU. More... | |
| #define | ATT_DEFAULT_PAYLOAD_LEN 20 |
| Default maximum payload length for most PDUs. More... | |
ATT Maximum Value Parameters | |
| #define | ATT_VALUE_MAX_LEN 512 |
| Maximum attribute value length. More... | |
| #define | ATT_VALUE_MAX_OFFSET 511 |
| Maximum attribute value offset. More... | |
ATT Transaction Timeout | |
Maximum time allowed between transaction request and response. | |
| #define | ATT_MAX_TRANS_TIMEOUT 30 |
| Maximum transaction timeout in seconds. More... | |
ATT Error Codes | |
| #define | ATT_SUCCESS 0x00 |
| Operation successful. More... | |
| #define | ATT_ERR_HANDLE 0x01 |
| Invalid handle. More... | |
| #define | ATT_ERR_READ 0x02 |
| Read not permitted. More... | |
| #define | ATT_ERR_WRITE 0x03 |
| Write not permitted. More... | |
| #define | ATT_ERR_INVALID_PDU 0x04 |
| Invalid pdu. More... | |
| #define | ATT_ERR_AUTH 0x05 |
| Insufficient authentication. More... | |
| #define | ATT_ERR_NOT_SUP 0x06 |
| Request not supported. More... | |
| #define | ATT_ERR_OFFSET 0x07 |
| Invalid offset. More... | |
| #define | ATT_ERR_AUTHOR 0x08 |
| Insufficient authorization. More... | |
| #define | ATT_ERR_QUEUE_FULL 0x09 |
| Prepare queue full. More... | |
| #define | ATT_ERR_NOT_FOUND 0x0A |
| Attribute not found. More... | |
| #define | ATT_ERR_NOT_LONG 0x0B |
| Attribute not long. More... | |
| #define | ATT_ERR_KEY_SIZE 0x0C |
| Insufficient encryption key size. More... | |
| #define | ATT_ERR_LENGTH 0x0D |
| Invalid attribute value length. More... | |
| #define | ATT_ERR_UNLIKELY 0x0E |
| Other unlikely error. More... | |
| #define | ATT_ERR_ENC 0x0F |
| Insufficient encryption. More... | |
| #define | ATT_ERR_GROUP_TYPE 0x10 |
| Unsupported group type. More... | |
| #define | ATT_ERR_RESOURCES 0x11 |
| Insufficient resources. More... | |
| #define | ATT_ERR_DATABASE_OUT_OF_SYNC 0x12 |
| Client out of synch with database. More... | |
| #define | ATT_ERR_VALUE_NOT_ALLOWED 0x13 |
| Value not allowed. More... | |
| #define | ATT_ERR_WRITE_REJ 0xFC |
| Write request rejected. More... | |
| #define | ATT_ERR_CCCD 0xFD |
| CCCD improperly configured. More... | |
| #define | ATT_ERR_IN_PROGRESS 0xFE |
| Procedure already in progress. More... | |
| #define | ATT_ERR_RANGE 0xFF |
| Value out of range. More... | |
Proprietary Internal Error Codes | |
These codes may be sent to application but are not present in any ATT PDU. | |
| #define | ATT_ERR_MEMORY 0x70 |
| Out of memory. More... | |
| #define | ATT_ERR_TIMEOUT 0x71 |
| Transaction timeout. More... | |
| #define | ATT_ERR_OVERFLOW 0x72 |
| Transaction overflow. More... | |
| #define | ATT_ERR_INVALID_RSP 0x73 |
| Invalid response PDU. More... | |
| #define | ATT_ERR_CANCELLED 0x74 |
| Request cancelled. More... | |
| #define | ATT_ERR_UNDEFINED 0x75 |
| Other undefined error. More... | |
| #define | ATT_ERR_REQ_NOT_FOUND 0x76 |
| Required characteristic not found. More... | |
| #define | ATT_ERR_MTU_EXCEEDED 0x77 |
| Attribute PDU length exceeded MTU size. More... | |
| #define | ATT_ERR_NO_CHANNEL 0x78 |
| No enhanced channel available. More... | |
| #define | ATT_CONTINUING 0x79 |
| Procedure continuing. More... | |
| #define | ATT_RSP_PENDING 0x7A |
| Response delayed pending higher layer. More... | |
ATT Application Error Codes | |
These codes may be sent to application but are not present in any ATT PDU. | |
| #define | ATT_ERR_VALUE_RANGE 0x80 |
| Value out of range. More... | |
| #define | ATT_ERR_INVALID_CHANGE_CTR 0x80 |
| Invalid change counter. More... | |
| #define | ATT_ERR_OPCODE_NOT_SUPPORTED 0x81 |
| Opcode out of range. More... | |
| #define | ATT_ERR_MUTE_DISABLE 0x82 |
| Mute disable. More... | |
| #define | ATT_ERR_VALUE_RANGE_x83 0x83 |
| Value out of range 0x83. More... | |
ATT HCI Error Status | |
| #define | ATT_HCI_ERR_BASE 0x20 |
| Base value for HCI error status values passed through ATT. Since the values of HCI and ATT error codes overlap, the constant ATT_HCI_ERR_BASE is added to HCI error codes before being passed through ATT. See HCI_SUCCESS for HCI error code values. More... | |
ATT PDU Types | |
| #define | ATT_PDU_ERR_RSP 0x01 |
| Error response. More... | |
| #define | ATT_PDU_MTU_REQ 0x02 |
| Exchange mtu request. More... | |
| #define | ATT_PDU_MTU_RSP 0x03 |
| Exchange mtu response. More... | |
| #define | ATT_PDU_FIND_INFO_REQ 0x04 |
| Find information request. More... | |
| #define | ATT_PDU_FIND_INFO_RSP 0x05 |
| Find information response. More... | |
| #define | ATT_PDU_FIND_TYPE_REQ 0x06 |
| Find by type value request. More... | |
| #define | ATT_PDU_FIND_TYPE_RSP 0x07 |
| Find by type value response. More... | |
| #define | ATT_PDU_READ_TYPE_REQ 0x08 |
| Read by type request. More... | |
| #define | ATT_PDU_READ_TYPE_RSP 0x09 |
| Read by type response. More... | |
| #define | ATT_PDU_READ_REQ 0x0A |
| Read request. More... | |
| #define | ATT_PDU_READ_RSP 0x0B |
| Read response. More... | |
| #define | ATT_PDU_READ_BLOB_REQ 0x0C |
| Read blob request. More... | |
| #define | ATT_PDU_READ_BLOB_RSP 0x0D |
| Read blob response. More... | |
| #define | ATT_PDU_READ_MULT_REQ 0x0E |
| Read multiple request. More... | |
| #define | ATT_PDU_READ_MULT_RSP 0x0F |
| Read multiple response. More... | |
| #define | ATT_PDU_READ_GROUP_TYPE_REQ 0x10 |
| Read by group type request. More... | |
| #define | ATT_PDU_READ_GROUP_TYPE_RSP 0x11 |
| Read by group type response. More... | |
| #define | ATT_PDU_WRITE_REQ 0x12 |
| Write request. More... | |
| #define | ATT_PDU_WRITE_RSP 0x13 |
| Write response. More... | |
| #define | ATT_PDU_WRITE_CMD 0x52 |
| Write command. More... | |
| #define | ATT_PDU_SIGNED_WRITE_CMD 0xD2 |
| Signed write command. More... | |
| #define | ATT_PDU_PREP_WRITE_REQ 0x16 |
| Prepare write request. More... | |
| #define | ATT_PDU_PREP_WRITE_RSP 0x17 |
| Prepare write response. More... | |
| #define | ATT_PDU_EXEC_WRITE_REQ 0x18 |
| Execute write request. More... | |
| #define | ATT_PDU_EXEC_WRITE_RSP 0x19 |
| Execute write response. More... | |
| #define | ATT_PDU_VALUE_NTF 0x1B |
| Handle value notification. More... | |
| #define | ATT_PDU_VALUE_IND 0x1D |
| Handle value indication. More... | |
| #define | ATT_PDU_VALUE_CNF 0x1E |
| Handle value confirmation. More... | |
| #define | ATT_PDU_READ_MULT_VAR_REQ 0x20 |
| Read multiple variable length request. More... | |
| #define | ATT_PDU_READ_MULT_VAR_RSP 0x21 |
| Read multiple variable length response. More... | |
| #define | ATT_PDU_MULT_VALUE_NTF 0x23 |
| Handle value multiple notification. More... | |
ATT PDU Length Fields | |
| #define | ATT_ERR_RSP_LEN 5 |
| Error response length. More... | |
| #define | ATT_MTU_REQ_LEN 3 |
| MTU request length. More... | |
| #define | ATT_MTU_RSP_LEN 3 |
| MTU response length. More... | |
| #define | ATT_FIND_INFO_REQ_LEN 5 |
| Find information request length. More... | |
| #define | ATT_FIND_INFO_RSP_LEN 2 |
| Find information response length. More... | |
| #define | ATT_FIND_TYPE_REQ_LEN 7 |
| Find type request length. More... | |
| #define | ATT_FIND_TYPE_RSP_LEN 1 |
| Find type response length. More... | |
| #define | ATT_READ_TYPE_REQ_LEN 5 |
| Read type request length. More... | |
| #define | ATT_READ_TYPE_RSP_LEN 2 |
| Read type response length. More... | |
| #define | ATT_READ_REQ_LEN 3 |
| Read request length. More... | |
| #define | ATT_READ_RSP_LEN 1 |
| Read response length. More... | |
| #define | ATT_READ_BLOB_REQ_LEN 5 |
| Read blob request legnth. More... | |
| #define | ATT_READ_BLOB_RSP_LEN 1 |
| Read blob response length. More... | |
| #define | ATT_READ_MULT_REQ_LEN 1 |
| Read multiple request length. More... | |
| #define | ATT_READ_MULT_RSP_LEN 1 |
| Read multiple response length. More... | |
| #define | ATT_READ_GROUP_TYPE_REQ_LEN 5 |
| Read group type request length. More... | |
| #define | ATT_READ_GROUP_TYPE_RSP_LEN 2 |
| Read group type response length. More... | |
| #define | ATT_WRITE_REQ_LEN 3 |
| Write request length. More... | |
| #define | ATT_WRITE_RSP_LEN 1 |
| Write response length. More... | |
| #define | ATT_WRITE_CMD_LEN 3 |
| Write command length. More... | |
| #define | ATT_SIGNED_WRITE_CMD_LEN (ATT_WRITE_CMD_LEN + ATT_AUTH_SIG_LEN) |
| Signed write command length. More... | |
| #define | ATT_PREP_WRITE_REQ_LEN 5 |
| Prepared write command length. More... | |
| #define | ATT_PREP_WRITE_RSP_LEN 5 |
| Prepared write response length. More... | |
| #define | ATT_EXEC_WRITE_REQ_LEN 2 |
| Execute write request length. More... | |
| #define | ATT_EXEC_WRITE_RSP_LEN 1 |
| Execute write response length. More... | |
| #define | ATT_VALUE_NTF_LEN 3 |
| Value notification length. More... | |
| #define | ATT_VALUE_IND_LEN 3 |
| Value indication length. More... | |
| #define | ATT_VALUE_CNF_LEN 1 |
| Value confirmation length. More... | |
| #define | ATT_READ_MULT_VAR_REQ_LEN 1 |
| Base read multiple variable request length. More... | |
| #define | ATT_READ_MULT_VAR_RSP_LEN 1 |
| Base read multiple variable response length. More... | |
| #define | ATT_PDU_MULT_VALUE_NTF_LEN 1 |
| Base multiple variable notification length. More... | |
ATT Find Information Response Format | |
| #define | ATT_FIND_HANDLE_16_UUID 0x01 |
| Handle and 16 bit UUID. More... | |
| #define | ATT_FIND_HANDLE_128_UUID 0x02 |
| Handle and 128 bit UUID. More... | |
ATT Execute Write Request Flags | |
| #define | ATT_EXEC_WRITE_CANCEL 0x00 |
| Cancel all prepared writes. More... | |
| #define | ATT_EXEC_WRITE_ALL 0x01 |
| Write all pending prepared writes. More... | |
ATT PDU Masks | |
| #define | ATT_PDU_MASK_SERVER 0x01 |
| Server bit mask. More... | |
| #define | ATT_PDU_MASK_COMMAND 0x40 |
| Command bit mask. More... | |
| #define | ATT_PDU_MASK_SIGNED 0x80 |
| Auth signature bit mask. More... | |
ATT Handle Constants | |
| #define | ATT_HANDLE_NONE 0x0000 |
| Handle none. More... | |
| #define | ATT_HANDLE_START 0x0001 |
| Handle start. More... | |
| #define | ATT_HANDLE_MAX 0xFFFF |
| Handle max. More... | |
ATT UUID Lengths | |
| #define | ATT_NO_UUID_LEN 0 |
| Length when no UUID is present ;-) More... | |
| #define | ATT_16_UUID_LEN 2 |
| Length in bytes of a 16 bit UUID. More... | |
| #define | ATT_128_UUID_LEN 16 |
| Length in bytes of a 128 bit UUID. More... | |
GATT Characteristic Properties | |
Properties for how a characteristic may be interacted with through the ATT Protocol. | |
| #define | ATT_PROP_BROADCAST 0x01 |
| Permit broadcasts. More... | |
| #define | ATT_PROP_READ 0x02 |
| Permit reads. More... | |
| #define | ATT_PROP_WRITE_NO_RSP 0x04 |
| Permit writes without response. More... | |
| #define | ATT_PROP_WRITE 0x08 |
| Permit writes with response. More... | |
| #define | ATT_PROP_NOTIFY 0x10 |
| Permit notifications. More... | |
| #define | ATT_PROP_INDICATE 0x20 |
| Permit indications. More... | |
| #define | ATT_PROP_AUTHENTICATED 0x40 |
| Permit signed writes. More... | |
| #define | ATT_PROP_EXTENDED 0x80 |
| More properties defined in extended properties. More... | |
GATT Characteristic Extended Properties | |
| #define | ATT_EXT_PROP_RELIABLE_WRITE 0x0001 |
| Permit reliable writes. More... | |
| #define | ATT_EXT_PROP_WRITEABLE_AUX 0x0002 |
| Permit write to characteristic descriptor. More... | |
GATT Client Charactertic Configuration | |
Configures a characteristic to send notifications or indications, if applicable. | |
| #define | ATT_CLIENT_CFG_NOTIFY 0x0001 |
| Notify the value. More... | |
| #define | ATT_CLIENT_CFG_INDICATE 0x0002 |
| Indicate the value. More... | |
GATT Server Characteristic Configuration | |
| #define | ATT_SERVER_CFG_BROADCAST 0x0001 |
| Broadcast the value. More... | |
GATT Characteristic Format | |
| #define | ATT_FORMAT_BOOLEAN 0x01 |
| Boolean. More... | |
| #define | ATT_FORMAT_2BIT 0x02 |
| Unsigned 2 bit integer. More... | |
| #define | ATT_FORMAT_NIBBLE 0x03 |
| Unsigned 4 bit integer. More... | |
| #define | ATT_FORMAT_UINT8 0x04 |
| Unsigned 8 bit integer. More... | |
| #define | ATT_FORMAT_UINT12 0x05 |
| Unsigned 12 bit integer. More... | |
| #define | ATT_FORMAT_UINT16 0x06 |
| Unsigned 16 bit integer. More... | |
| #define | ATT_FORMAT_UINT24 0x07 |
| Unsigned 24 bit integer. More... | |
| #define | ATT_FORMAT_UINT32 0x08 |
| Unsigned 32 bit integer. More... | |
| #define | ATT_FORMAT_UINT48 0x09 |
| Unsigned 48 bit integer. More... | |
| #define | ATT_FORMAT_UINT64 0x0A |
| Unsigned 64 bit integer. More... | |
| #define | ATT_FORMAT_UINT128 0x0B |
| Unsigned 128 bit integer. More... | |
| #define | ATT_FORMAT_SINT8 0x0C |
| Signed 8 bit integer. More... | |
| #define | ATT_FORMAT_SINT12 0x0D |
| Signed 12 bit integer. More... | |
| #define | ATT_FORMAT_SINT16 0x0E |
| Signed 16 bit integer. More... | |
| #define | ATT_FORMAT_SINT24 0x0F |
| Signed 24 bit integer. More... | |
| #define | ATT_FORMAT_SINT32 0x10 |
| Signed 32 bit integer. More... | |
| #define | ATT_FORMAT_SINT48 0x11 |
| Signed 48 bit integer. More... | |
| #define | ATT_FORMAT_SINT64 0x12 |
| Signed 64 bit integer. More... | |
| #define | ATT_FORMAT_SINT128 0x13 |
| Signed 128 bit integer. More... | |
| #define | ATT_FORMAT_FLOAT32 0x14 |
| IEEE-754 32 bit floating point. More... | |
| #define | ATT_FORMAT_FLOAT64 0x15 |
| IEEE-754 64 bit floating point. More... | |
| #define | ATT_FORMAT_SFLOAT 0x16 |
| IEEE-11073 16 bit SFLOAT. More... | |
| #define | ATT_FORMAT_FLOAT 0x17 |
| IEEE-11073 32 bit FLOAT. More... | |
| #define | ATT_FORMAT_DUINT16 0x18 |
| IEEE-20601 format. More... | |
| #define | ATT_FORMAT_UTF8 0x19 |
| UTF-8 string. More... | |
| #define | ATT_FORMAT_UTF16 0x1A |
| UTF-16 string. More... | |
| #define | ATT_FORMAT_STRUCT 0x1B |
| Opaque structure. More... | |
GATT Database Hash | |
| #define | ATT_DATABASE_HASH_LEN 16 |
| Database hash length. More... | |
GATT Client Supported Features | |
| #define | ATTS_CSF_ROBUST_CACHING (1<<0) |
| Robust caching. More... | |
| #define | ATTS_CSF_EATT_BEARER (1<<1) |
| Enhanced ATT Bearer. More... | |
| #define | ATTS_CSF_MULTI_VAL_NTF (1<<2) |
| Multiple Handle Value Notifications. More... | |
| #define | ATTS_CSF_ALL_FEATURES (0x7) |
| Mask of all client supported features. More... | |
| #define | ATT_CSF_LEN 1 |
| Length of client supported features array. More... | |
GATT Server Supported Features | |
| #define | ATTS_SSF_EATT (1<<0) |
| Enhanced ATT supported. More... | |
ATT Service UUIDs | |
Defined BLE Service UUID constants. | |
| #define | ATT_UUID_GAP_SERVICE 0x1800 |
| Generic Access Profile Service. More... | |
| #define | ATT_UUID_GATT_SERVICE 0x1801 |
| Generic Attribute Profile Service. More... | |
| #define | ATT_UUID_IMMEDIATE_ALERT_SERVICE 0x1802 |
| Immediate Alert Service. More... | |
| #define | ATT_UUID_LINK_LOSS_SERVICE 0x1803 |
| Link Loss Service. More... | |
| #define | ATT_UUID_TX_POWER_SERVICE 0x1804 |
| Tx Power Service. More... | |
| #define | ATT_UUID_CURRENT_TIME_SERVICE 0x1805 |
| Current Time Service. More... | |
| #define | ATT_UUID_REF_TIME_UPDATE_SERVICE 0x1806 |
| Reference Time Update Service. More... | |
| #define | ATT_UUID_DST_CHANGE_SERVICE 0x1807 |
| Next DST Change Service. More... | |
| #define | ATT_UUID_GLUCOSE_SERVICE 0x1808 |
| Glucose Service. More... | |
| #define | ATT_UUID_HEALTH_THERM_SERVICE 0x1809 |
| Health Thermometer Service. More... | |
| #define | ATT_UUID_DEVICE_INFO_SERVICE 0x180A |
| Device Information Service. More... | |
| #define | ATT_UUID_NETWORK_AVAIL_SERVICE 0x180B |
| Network Availability Service. More... | |
| #define | ATT_UUID_WATCHDOG_SERVICE 0x180C |
| Watchdog Service. More... | |
| #define | ATT_UUID_HEART_RATE_SERVICE 0x180D |
| Heart Rate Service. More... | |
| #define | ATT_UUID_PHONE_ALERT_SERVICE 0x180E |
| Phone Alert Status Service. More... | |
| #define | ATT_UUID_BATTERY_SERVICE 0x180F |
| Battery Service. More... | |
| #define | ATT_UUID_BLOOD_PRESSURE_SERVICE 0x1810 |
| Blood Pressure Service. More... | |
| #define | ATT_UUID_ALERT_NOTIF_SERVICE 0x1811 |
| Alert Notification Service. More... | |
| #define | ATT_UUID_HID_SERVICE 0x1812 |
| Human Interface Device Service. More... | |
| #define | ATT_UUID_SCAN_PARAM_SERVICE 0x1813 |
| Scan Parameter Service. More... | |
| #define | ATT_UUID_RUNNING_SPEED_SERVICE 0x1814 |
| Running Speed Service. More... | |
| #define | ATT_UUID_CYCLING_SPEED_SERVICE 0x1816 |
| Cycling Speed Service. More... | |
| #define | ATT_UUID_CYCLING_POWER_SERVICE 0x1818 |
| Cycling Power Service. More... | |
| #define | ATT_UUID_USER_DATA_SERVICE 0x181C |
| User Data Service. More... | |
| #define | ATT_UUID_WEIGHT_SCALE_SERVICE 0x181D |
| Weight Scale Service. More... | |
| #define | ATT_UUID_IP_SUPPORT_SERVICE 0x1820 |
| IP Support Service. More... | |
| #define | ATT_UUID_PULSE_OXIMITER_SERVICE 0x1822 |
| Pulse Oximeter Service. More... | |
| #define | ATT_UUID_MESH_PRV_SERVICE 0x1827 |
| Mesh Provisioning Service. More... | |
| #define | ATT_UUID_MESH_PROXY_SERVICE 0x1828 |
| Mesh Proxy Service. More... | |
| #define | ATT_UUID_CONSTANT_TONE_SERVICE 0x7F7F |
| Constant Tone Extension. More... | |
GATT UUIDs | |
| #define | ATT_UUID_PRIMARY_SERVICE 0x2800 |
| Primary Service. More... | |
| #define | ATT_UUID_SECONDARY_SERVICE 0x2801 |
| Secondary Service. More... | |
| #define | ATT_UUID_INCLUDE 0x2802 |
| Include. More... | |
| #define | ATT_UUID_CHARACTERISTIC 0x2803 |
| Characteristic. More... | |
GATT Characteristic Descriptor UUIDs | |
| #define | ATT_UUID_CHARACTERISTIC_EXT 0x2900 |
| Characteristic Extended Properties. More... | |
| #define | ATT_UUID_CHAR_USER_DESC 0x2901 |
| Characteristic User Description. More... | |
| #define | ATT_UUID_CLIENT_CHAR_CONFIG 0x2902 |
| Client Characteristic Configuration. More... | |
| #define | ATT_UUID_SERVER_CHAR_CONFIG 0x2903 |
| Server Characteristic Configuration. More... | |
| #define | ATT_UUID_CHAR_PRES_FORMAT 0x2904 |
| Characteristic Presentation Format. More... | |
| #define | ATT_UUID_AGGREGATE_FORMAT 0x2905 |
| Characteristic Aggregate Format. More... | |
| #define | ATT_UUID_VALID_RANGE 0x2906 |
| Valid Range. More... | |
| #define | ATT_UUID_HID_EXT_REPORT_MAPPING 0x2907 |
| HID External Report ID Mapping. More... | |
| #define | ATT_UUID_HID_REPORT_ID_MAPPING 0x2908 |
| HID Report ID Mapping. More... | |
GATT Characistic UUIDs | |
| #define | ATT_UUID_DEVICE_NAME 0x2A00 |
| Device Name. More... | |
| #define | ATT_UUID_APPEARANCE 0x2A01 |
| Appearance. More... | |
| #define | ATT_UUID_PERIPH_PRIVACY_FLAG 0x2A02 |
| Peripheral Privacy Flag. More... | |
| #define | ATT_UUID_RECONN_ADDR 0x2A03 |
| Reconnection Address. More... | |
| #define | ATT_UUID_PREF_CONN_PARAM 0x2A04 |
| Peripheral Preferred Connection Parameters. More... | |
| #define | ATT_UUID_SERVICE_CHANGED 0x2A05 |
| Service Changed. More... | |
| #define | ATT_UUID_ALERT_LEVEL 0x2A06 |
| Alert Level. More... | |
| #define | ATT_UUID_TX_POWER_LEVEL 0x2A07 |
| Tx Power Level. More... | |
| #define | ATT_UUID_DATE_TIME 0x2A08 |
| Date Time. More... | |
| #define | ATT_UUID_DAY_OF_WEEK 0x2A09 |
| Day of Week. More... | |
| #define | ATT_UUID_DAY_DATE_TIME 0x2A0A |
| Day Date Time. More... | |
| #define | ATT_UUID_EXACT_TIME_100 0x2A0B |
| Exact Time 100. More... | |
| #define | ATT_UUID_EXACT_TIME_256 0x2A0C |
| Exact Time 256. More... | |
| #define | ATT_UUID_DST_OFFSET 0x2A0D |
| DST Offset. More... | |
| #define | ATT_UUID_TIME_ZONE 0x2A0E |
| Time Zone. More... | |
| #define | ATT_UUID_LOCAL_TIME_INFO 0x2A0F |
| Local Time Information. More... | |
| #define | ATT_UUID_SECONDARY_TIME_ZONE 0x2A10 |
| Secondary Time Zone. More... | |
| #define | ATT_UUID_TIME_WITH_DST 0x2A11 |
| Time with DST. More... | |
| #define | ATT_UUID_TIME_ACCURACY 0x2A12 |
| Time Accuracy. More... | |
| #define | ATT_UUID_TIME_SOURCE 0x2A13 |
| Time Source. More... | |
| #define | ATT_UUID_REFERENCE_TIME_INFO 0x2A14 |
| Reference Time Information. More... | |
| #define | ATT_UUID_TIME_BROADCAST 0x2A15 |
| Time Broadcast. More... | |
| #define | ATT_UUID_TIME_UPDATE_CP 0x2A16 |
| Time Update Control Point. More... | |
| #define | ATT_UUID_TIME_UPDATE_STATE 0x2A17 |
| Time Update State. More... | |
| #define | ATT_UUID_GLUCOSE_MEAS 0x2A18 |
| Glucose Measurement. More... | |
| #define | ATT_UUID_BATTERY_LEVEL 0x2A19 |
| Battery Level. More... | |
| #define | ATT_UUID_BATTERY_POWER_STATE 0x2A1A |
| Battery Power State. More... | |
| #define | ATT_UUID_BATTERY_LEVEL_STATE 0x2A1B |
| Battery Level State. More... | |
| #define | ATT_UUID_TEMP_MEAS 0x2A1C |
| Temperature Measurement. More... | |
| #define | ATT_UUID_TEMP_TYPE 0x2A1D |
| Temperature Type. More... | |
| #define | ATT_UUID_INTERMEDIATE_TEMP 0x2A1E |
| Intermediate Temperature. More... | |
| #define | ATT_UUID_TEMP_C 0x2A1F |
| Temperature Celsius. More... | |
| #define | ATT_UUID_TEMP_F 0x2A20 |
| Temperature Fahrenheit. More... | |
| #define | ATT_UUID_MEAS_INTERVAL 0x2A21 |
| Measurement Interval. More... | |
| #define | ATT_UUID_HID_BOOT_KEYBOARD_IN 0x2A22 |
| HID Boot Keyboard In. More... | |
| #define | ATT_UUID_SYSTEM_ID 0x2A23 |
| System ID. More... | |
| #define | ATT_UUID_MODEL_NUMBER 0x2A24 |
| Model Number String. More... | |
| #define | ATT_UUID_SERIAL_NUMBER 0x2A25 |
| Serial Number String. More... | |
| #define | ATT_UUID_FIRMWARE_REV 0x2A26 |
| Firmware Revision String. More... | |
| #define | ATT_UUID_HARDWARE_REV 0x2A27 |
| Hardware Revision String. More... | |
| #define | ATT_UUID_SOFTWARE_REV 0x2A28 |
| Software Revision String. More... | |
| #define | ATT_UUID_MANUFACTURER_NAME 0x2A29 |
| Manufacturer Name String. More... | |
| #define | ATT_UUID_11073_CERT_DATA 0x2A2A |
| IEEE 11073-20601 Regulatory Certification Data List. More... | |
| #define | ATT_UUID_CURRENT_TIME 0x2A2B |
| Current Time. More... | |
| #define | ATT_UUID_ELEVATION 0x2A2C |
| Elevation. More... | |
| #define | ATT_UUID_LATITUDE 0x2A2D |
| Latitude. More... | |
| #define | ATT_UUID_LONGITUDE 0x2A2E |
| Longitude. More... | |
| #define | ATT_UUID_POSITION_2D 0x2A2F |
| Position 2D. More... | |
| #define | ATT_UUID_POSITION_3D 0x2A30 |
| Position 3D. More... | |
| #define | ATT_UUID_VENDOR_ID 0x2A31 |
| Vendor ID. More... | |
| #define | ATT_UUID_HID_BOOT_KEYBOARD_OUT 0x2A32 |
| HID Boot Keyboard Out. More... | |
| #define | ATT_UUID_HID_BOOT_MOUSE_IN 0x2A33 |
| HID Boot Mouse In. More... | |
| #define | ATT_UUID_GLUCOSE_MEAS_CONTEXT 0x2A34 |
| Glucose Measurement Context. More... | |
| #define | ATT_UUID_BP_MEAS 0x2A35 |
| Blood Pressure Measurement. More... | |
| #define | ATT_UUID_INTERMEDIATE_BP 0x2A36 |
| Intermediate Cuff Pressure. More... | |
| #define | ATT_UUID_HR_MEAS 0x2A37 |
| Heart Rate Measurement. More... | |
| #define | ATT_UUID_HR_SENSOR_LOC 0x2A38 |
| Body Sensor Location. More... | |
| #define | ATT_UUID_HR_CP 0x2A39 |
| Heart Rate Control Point. More... | |
| #define | ATT_UUID_REMOVABLE 0x2A3A |
| Removable. More... | |
| #define | ATT_UUID_SERVICE_REQ 0x2A3B |
| Service Required. More... | |
| #define | ATT_UUID_SCI_TEMP_C 0x2A3C |
| Scientific Temperature in Celsius. More... | |
| #define | ATT_UUID_STRING 0x2A3D |
| String. More... | |
| #define | ATT_UUID_NETWORK_AVAIL 0x2A3E |
| Network Availability. More... | |
| #define | ATT_UUID_ALERT_STATUS 0x2A3F |
| Alert Status. More... | |
| #define | ATT_UUID_RINGER_CP 0x2A40 |
| Ringer Control Point. More... | |
| #define | ATT_UUID_RINGER_SETTING 0x2A41 |
| Ringer Setting. More... | |
| #define | ATT_UUID_ALERT_CAT_ID_MASK 0x2A42 |
| Alert Category ID Bit Mask. More... | |
| #define | ATT_UUID_ALERT_CAT_ID 0x2A43 |
| Alert Category ID. More... | |
| #define | ATT_UUID_ALERT_NOTIF_CP 0x2A44 |
| Alert Notification Control Point. More... | |
| #define | ATT_UUID_UNREAD_ALERT_STATUS 0x2A45 |
| Unread Alert Status. More... | |
| #define | ATT_UUID_NEW_ALERT 0x2A46 |
| New Alert. More... | |
| #define | ATT_UUID_SUP_NEW_ALERT_CAT 0x2A47 |
| Supported New Alert Category. More... | |
| #define | ATT_UUID_SUP_UNREAD_ALERT_CAT 0x2A48 |
| Supported Unread Alert Category. More... | |
| #define | ATT_UUID_BP_FEATURE 0x2A49 |
| Blood Pressure Feature. More... | |
| #define | ATT_UUID_HID_INFORMATION 0x2A4A |
| HID Information. More... | |
| #define | ATT_UUID_HID_REPORT_MAP 0x2A4B |
| HID Report Map. More... | |
| #define | ATT_UUID_HID_CONTROL_POINT 0x2A4C |
| HID Control Point. More... | |
| #define | ATT_UUID_HID_REPORT 0x2A4D |
| HID Report. More... | |
| #define | ATT_UUID_HID_PROTOCOL_MODE 0x2A4E |
| HID Protocol Mode. More... | |
| #define | ATT_UUID_SCAN_INT_WIND 0x2A4F |
| Scan Interval Window. More... | |
| #define | ATT_UUID_PNP_ID 0x2A50 |
| PnP ID. More... | |
| #define | ATT_UUID_GLUCOSE_FEATURE 0x2A51 |
| Glucose Feature. More... | |
| #define | ATT_UUID_RACP 0x2A52 |
| Record Access Control Point. More... | |
| #define | ATT_UUID_CAR 0x2AA6 |
| Central Address Resolution. More... | |
| #define | ATT_UUID_RUNNING_SPEED_FEATURE 0x2A54 |
| Running Speed Feature. More... | |
| #define | ATT_UUID_RUNNING_SPEED_MEASUREMENT 0x2A53 |
| Running Speed Measurement. More... | |
| #define | ATT_UUID_PULSE_OX_FEATURES 0x2A60 |
| Pulse Oximeter Features. More... | |
| #define | ATT_UUID_PULSE_OX_SPOT_CHECK 0x2A5E |
| Pulse Oximeter Features. More... | |
| #define | ATT_UUID_PULSE_OX_CONTINUOUS 0x2A5F |
| Pulse Oximeter Features. More... | |
| #define | ATT_UUID_CYCLING_POWER_FEATURE 0x2A65 |
| Cycling Power Feature. More... | |
| #define | ATT_UUID_CYCLING_POWER_MEASUREMENT 0x2A63 |
| Cycling Power Measurement. More... | |
| #define | ATT_UUID_CYCLING_SPEED_FEATURE 0x2A5C |
| Cycling Speed Feature. More... | |
| #define | ATT_UUID_CYCLING_SPEED_MEASUREMENT 0x2A5B |
| Cycling Speed Measurement. More... | |
| #define | ATT_UUID_SENSOR_LOCATION 0x2A5D |
| Sensor Location. More... | |
| #define | ATT_UUID_DB_CHANGE_INCREMENT 0x2A99 |
| Database Change Increment. More... | |
| #define | ATT_UUID_USER_INDEX 0x2A9A |
| User Index. More... | |
| #define | ATT_UUID_WEIGHT_MEAS 0x2A9D |
| Weight Measurement. More... | |
| #define | ATT_UUID_WEIGHT_SCALE_FEATURE 0x2A9E |
| Weight Scale Feature. More... | |
| #define | ATT_UUID_USER_CONTROL_POINT 0x2A9F |
| User Control Point. More... | |
| #define | ATT_UUID_RPAO 0x2AC9 |
| Resolvable Prviate Address Only. More... | |
| #define | ATT_UUID_MESH_PRV_DATA_IN 0x2ADB |
| Mesh Provisioning Data In. More... | |
| #define | ATT_UUID_MESH_PRV_DATA_OUT 0x2ADC |
| Mesh Provisioning Data Out. More... | |
| #define | ATT_UUID_MESH_PROXY_DATA_IN 0x2ADD |
| Mesh Proxy Data In. More... | |
| #define | ATT_UUID_MESH_PROXY_DATA_OUT 0x2ADE |
| Mesh Proxy Data Out. More... | |
| #define | ATT_UUID_CLIENT_SUPPORTED_FEATURES 0x2B29 |
| Client Supported Features. More... | |
| #define | ATT_UUID_DATABASE_HASH 0x2B2A |
| Database Hash. More... | |
| #define | ATT_UUID_SERVER_SUPPORTED_FEATURES 0x2B3A |
| Server Supported Features. More... | |
| #define | ATT_UUID_CTE_ENABLE 0x7F80 |
| Constant Tone Extension enable. More... | |
| #define | ATT_UUID_CTE_MIN_LEN 0x7F81 |
| Constant Tone Extension minimum length. More... | |
| #define | ATT_UUID_CTE_TX_CNT 0x7F82 |
| Constant Tone Extension transmit count. More... | |
| #define | ATT_UUID_CTE_TX_DURATION 0x7F83 |
| Constant Tone Extension transmit duration. More... | |
| #define | ATT_UUID_CTE_INTERVAL 0x7F84 |
| Constant Tone Extension interval. More... | |
| #define | ATT_UUID_CTE_PHY 0x7F85 |
| Constant Tone Extension PHY. More... | |
GATT Unit UUIDs | |
| #define | ATT_UUID_UNITLESS 0x2700 |
| unitless More... | |
| #define | ATT_UUID_LENGTH_M 0x2701 |
| length metre More... | |
| #define | ATT_UUID_MASS_KG 0x2702 |
| mass kilogram More... | |
| #define | ATT_UUID_TIME_SEC 0x2703 |
| time second More... | |
| #define | ATT_UUID_ELECTRIC_CURRENT_AMP 0x2704 |
| electric current ampere More... | |
| #define | ATT_UUID_THERMO_TEMP_K 0x2705 |
| thermodynamic temperature kelvin More... | |
| #define | ATT_UUID_AMOUNT_OF_SUBSTANCE_MOLE 0x2706 |
| amount of substance mole More... | |
| #define | ATT_UUID_LUMINOUS_INTENSITY_CAND 0x2707 |
| luminous intensity candela More... | |
| #define | ATT_UUID_AREA_SQ_M 0x2710 |
| area square metres More... | |
| #define | ATT_UUID_VOLUME_CU_M 0x2711 |
| volume cubic metres More... | |
| #define | ATT_UUID_VELOCITY_MPS 0x2712 |
| velocity metres per second More... | |
| #define | ATT_UUID_ACCELERATION_MPS_SQ 0x2713 |
| acceleration metres per second squared More... | |
| #define | ATT_UUID_WAVENUMBER_RECIPROCAL_M 0x2714 |
| wavenumber reciprocal metre More... | |
| #define | ATT_UUID_DENSITY_KG_PER_CU_M 0x2715 |
| density kilogram per cubic metre More... | |
| #define | ATT_UUID_SURFACE_DENS_KG_PER_SQ_M 0x2716 |
| surface density kilogram per square metre More... | |
| #define | ATT_UUID_SPECIFIC_VOL_CU_M_PER_KG 0x2717 |
| specific volume cubic metre per kilogram More... | |
| #define | ATT_UUID_CURRENT_DENS_AMP_PER_SQ_M 0x2718 |
| current density ampere per square metre More... | |
| #define | ATT_UUID_MAG_FIELD_STR_AMP_PER_M 0x2719 |
| magnetic field strength ampere per metre More... | |
| #define | ATT_UUID_AMOUNT_CONC_MOLE_PER_CU_M 0x271A |
| amount concentration mole per cubic metre More... | |
| #define | ATT_UUID_MASS_CONC_KG_PER_CU_M 0x271B |
| mass concentration kilogram per cubic metre More... | |
| #define | ATT_UUID_LUM_CAND_PER_SQ_M 0x271C |
| luminance candela per square metre More... | |
| #define | ATT_UUID_REFRACTIVE_INDEX 0x271D |
| refractive index More... | |
| #define | ATT_UUID_RELATIVE_PERMEABILITY 0x271E |
| relative permeability More... | |
| #define | ATT_UUID_PLANE_ANGLE_R 0x2720 |
| plane angle radian More... | |
| #define | ATT_UUID_SOLID_ANGLE_STER 0x2721 |
| solid angle steradian More... | |
| #define | ATT_UUID_FREQUENCY_HERTZ 0x2722 |
| frequency hertz More... | |
| #define | ATT_UUID_FORCE_NEWT 0x2723 |
| force newton More... | |
| #define | ATT_UUID_PRESSURE_PASCAL 0x2724 |
| pressure pascal More... | |
| #define | ATT_UUID_ENERGY_J 0x2725 |
| energy joule More... | |
| #define | ATT_UUID_POWER_W 0x2726 |
| power watt More... | |
| #define | ATT_UUID_ELECTRIC_CHG_C 0x2727 |
| electric charge coulomb More... | |
| #define | ATT_UUID_ELECTRIC_POTENTIAL_VOLT 0x2728 |
| electric potential difference volt More... | |
| #define | ATT_UUID_CAPACITANCE_F 0x2729 |
| capacitance farad More... | |
| #define | ATT_UUID_ELECTRIC_RESISTANCE_OHM 0x272A |
| electric resistance ohm More... | |
| #define | ATT_UUID_ELECTRIC_COND_SIEMENS 0x272B |
| electric conductance siemens More... | |
| #define | ATT_UUID_MAGNETIC_FLEX_WEBER 0x272C |
| magnetic flex weber More... | |
| #define | ATT_UUID_MAGNETIC_FLEX_DENS_TESLA 0x272D |
| magnetic flex density tesla More... | |
| #define | ATT_UUID_INDUCTANCE_H 0x272E |
| inductance henry More... | |
| #define | ATT_UUID_C_TEMP_DEG_C 0x272F |
| Celsius temperature degree Celsius. More... | |
| #define | ATT_UUID_LUMINOUS_FLUX_LUMEN 0x2730 |
| luminous flux lumen More... | |
| #define | ATT_UUID_ILLUMINANCE_LUX 0x2731 |
| illuminance lux More... | |
| #define | ATT_UUID_RADIONUCLIDE_BECQUEREL 0x2732 |
| activity referred to a radionuclide becquerel More... | |
| #define | ATT_UUID_ABSORBED_DOSE_GRAY 0x2733 |
| absorbed dose gray More... | |
| #define | ATT_UUID_DOSE_EQUIVALENT_SIEVERT 0x2734 |
| dose equivalent sievert More... | |
| #define | ATT_UUID_CATALYTIC_ACTIVITY_KATAL 0x2735 |
| catalytic activity katal More... | |
| #define | ATT_UUID_DYNAMIC_VISC_PASCAL_SEC 0x2740 |
| dynamic viscosity pascal second More... | |
| #define | ATT_UUID_MOMENT_OF_FORCE_NEWT_M 0x2741 |
| moment of force newton metre More... | |
| #define | ATT_UUID_SURFACE_TENSION_NEWT_PER_M 0x2742 |
| surface tension newton per metre More... | |
| #define | ATT_UUID_ANG_VELOCITY_R_PER_SEC 0x2743 |
| angular velocity radian per second More... | |
| #define | ATT_UUID_ANG_ACCEL_R_PER_SEC_SQD 0x2744 |
| angular acceleration radian per second squared More... | |
| #define | ATT_UUID_HEAT_FLUX_DEN_W_PER_SQ_M 0x2745 |
| heat flux density watt per square metre More... | |
| #define | ATT_UUID_HEAT_CAP_J_PER_K 0x2746 |
| heat capacity joule per kelvin More... | |
| #define | ATT_UUID_SPEC_HEAT_CAP_J_PER_KG_K 0x2747 |
| specific heat capacity joule per kilogram kelvin More... | |
| #define | ATT_UUID_SPEC_ENERGY_J_PER_KG 0x2748 |
| specific energy joule per kilogram More... | |
| #define | ATT_UUID_THERMAL_COND_W_PER_M_K 0x2749 |
| thermal conductivity watt per metre kelvin More... | |
| #define | ATT_UUID_ENERGY_DENSITY_J_PER_CU_M 0x274A |
| energy density joule per cubic metre More... | |
| #define | ATT_UUID_ELEC_FIELD_STR_VOLT_PER_M 0x274B |
| electric field strength volt per metre More... | |
| #define | ATT_UUID_ELEC_CHG_DENS_C_PER_CU_M 0x274C |
| electric charge density coulomb per cubic metre More... | |
| #define | ATT_UUID_SURF_CHG_DENS_C_PER_SQ_M 0x274D |
| surface charge density coulomb per square metre More... | |
| #define | ATT_UUID_ELEC_FLUX_DENS_C_PER_SQ_M 0x274E |
| electric flux density coulomb per square metre More... | |
| #define | ATT_UUID_PERMITTIVITY_F_PER_M 0x274F |
| permittivity farad per metre More... | |
| #define | ATT_UUID_PERMEABILITY_H_PER_M 0x2750 |
| permeability henry per metre More... | |
| #define | ATT_UUID_MOLAR_ENERGY_J_PER_MOLE 0x2751 |
| molar energy joule per mole More... | |
| #define | ATT_UUID_MOLAR_ENTROPY_J_PER_MOLE_K 0x2752 |
| molar entropy joule per mole kelvin More... | |
| #define | ATT_UUID_EXPOSURE_C_PER_KG 0x2753 |
| exposure coulomb per kilogram More... | |
| #define | ATT_UUID_DOSE_RATE_GRAY_PER_SEC 0x2754 |
| absorbed dose rate gray per second More... | |
| #define | ATT_UUID_RT_INTENSITY_W_PER_STER 0x2755 |
| radiant intensity watt per steradian More... | |
| #define | ATT_UUID_RCE_W_PER_SQ_METER_STER 0x2756 |
| radiance watt per square meter steradian More... | |
| #define | ATT_UUID_CATALYTIC_KATAL_PER_CU_M 0x2757 |
| catalytic activity concentration katal per cubic metre More... | |
| #define | ATT_UUID_TIME_MIN 0x2760 |
| time minute More... | |
| #define | ATT_UUID_TIME_HR 0x2761 |
| time hour More... | |
| #define | ATT_UUID_TIME_DAY 0x2762 |
| time day More... | |
| #define | ATT_UUID_PLANE_ANGLE_DEG 0x2763 |
| plane angle degree More... | |
| #define | ATT_UUID_PLANE_ANGLE_MIN 0x2764 |
| plane angle minute More... | |
| #define | ATT_UUID_PLANE_ANGLE_SEC 0x2765 |
| plane angle second More... | |
| #define | ATT_UUID_AREA_HECTARE 0x2766 |
| area hectare More... | |
| #define | ATT_UUID_VOLUME_L 0x2767 |
| volume litre More... | |
| #define | ATT_UUID_MASS_TONNE 0x2768 |
| mass tonne More... | |
| #define | ATT_UUID_PRESSURE_BAR 0x2780 |
| pressure bar More... | |
| #define | ATT_UUID_PRESSURE_MM 0x2781 |
| pressure millimetre of mercury More... | |
| #define | ATT_UUID_LENGTH_ANGSTROM 0x2782 |
| length angstrom More... | |
| #define | ATT_UUID_LENGTH_NAUTICAL_MILE 0x2783 |
| length nautical mile More... | |
| #define | ATT_UUID_AREA_BARN 0x2784 |
| area barn More... | |
| #define | ATT_UUID_VELOCITY_KNOT 0x2785 |
| velocity knot More... | |
| #define | ATT_UUID_LOG_RADIO_QUANT_NEPER 0x2786 |
| logarithmic radio quantity neper More... | |
| #define | ATT_UUID_LOG_RADIO_QUANT_BEL 0x2787 |
| logarithmic radio quantity bel More... | |
| #define | ATT_UUID_LOG_RADIO_QUANT_DB 0x2788 |
| logarithmic radio quantity decibel More... | |
| #define | ATT_UUID_LENGTH_YARD 0x27A0 |
| length yard More... | |
| #define | ATT_UUID_LENGTH_PARSEC 0x27A1 |
| length parsec More... | |
| #define | ATT_UUID_LENGTH_IN 0x27A2 |
| length inch More... | |
| #define | ATT_UUID_LENGTH_FOOT 0x27A3 |
| length foot More... | |
| #define | ATT_UUID_LENGTH_MILE 0x27A4 |
| length mile More... | |
| #define | ATT_UUID_PRESSURE_POUND_PER_SQ_IN 0x27A5 |
| pressure pound-force per square inch More... | |
| #define | ATT_UUID_VELOCITY_KPH 0x27A6 |
| velocity kilometre per hour More... | |
| #define | ATT_UUID_VELOCITY_MPH 0x27A7 |
| velocity mile per hour More... | |
| #define | ATT_UUID_ANG_VELOCITY_RPM 0x27A8 |
| angular velocity revolution per minute More... | |
| #define | ATT_UUID_ENERGY_GRAM_CALORIE 0x27A9 |
| energy gram calorie More... | |
| #define | ATT_UUID_ENERGY_KG_CALORIE 0x27AA |
| energy kilogram calorie More... | |
| #define | ATT_UUID_ENERGY_KILOWATT_HR 0x27AB |
| energy kilowatt hour More... | |
| #define | ATT_UUID_THERM_TEMP_F 0x27AC |
| thermodynamic temperature degree Fahrenheit More... | |
| #define | ATT_UUID_PERCENTAGE 0x27AD |
| percentage More... | |
| #define | ATT_UUID_PER_MILLE 0x27AE |
| per mille More... | |
| #define | ATT_UUID_PERIOD_BEATS_PER_MIN 0x27AF |
| period beats per minute More... | |
| #define | ATT_UUID_ELECTRIC_CHG_AMP_HRS 0x27B0 |
| electric charge ampere hours More... | |
| #define | ATT_UUID_MASS_DENSITY_MG_PER_DL 0x27B1 |
| mass density milligram per decilitre More... | |
| #define | ATT_UUID_MASS_DENSITY_MMOLE_PER_L 0x27B2 |
| mass density millimole per litre More... | |
| #define | ATT_UUID_TIME_YEAR 0x27B3 |
| time year More... | |
| #define | ATT_UUID_TIME_MONTH 0x27B4 |
| time month More... | |
Arm Ltd. proprietary UUIDs | |
| #define | ATT_UUID_ARM_BASE |
| Base UUID: E0262760-08C2-11E1-9073-0E8AC72EXXXX. More... | |
| #define | ATT_UUID_ARM_BUILD(part) UINT16_TO_BYTES(part), ATT_UUID_ARM_BASE |
| Macro for building Arm Ltd. UUIDs. More... | |
| #define | ATT_UUID_P1_SERVICE_PART 0x1001 |
| Partial proprietary service P1 UUID. More... | |
| #define | ATT_UUID_D1_DATA_PART 0x0001 |
| Partial proprietary characteristic data D1 UUID. More... | |
| #define | ATT_UUID_P1_SERVICE ATT_UUID_ARM_BUILD(ATT_UUID_P1_SERVICE_PART) |
| Proprietary services. More... | |
| #define | ATT_UUID_D1_DATA ATT_UUID_ARM_BUILD(ATT_UUID_D1_DATA_PART) |
| Proprietary characteristics. More... | |
ATT Service UUID Variables | |
| const uint8_t | attGapSvcUuid [2] |
| Generic Access Profile Service. More... | |
| const uint8_t | attGattSvcUuid [2] |
| Generic Attribute Profile Service. More... | |
| const uint8_t | attIasSvcUuid [2] |
| Immediate Alert Service. More... | |
| const uint8_t | attLlsSvcUuid [2] |
| Link Loss Service. More... | |
| const uint8_t | attTpsSvcUuid [2] |
| Tx Power Service. More... | |
| const uint8_t | attCtsSvcUuid [2] |
| Current Time Service. More... | |
| const uint8_t | attRtusSvcUuid [2] |
| Reference Time Update Service. More... | |
| const uint8_t | attNdcsSvcUuid [2] |
| Next DST Change Service. More... | |
| const uint8_t | attGlsSvcUuid [2] |
| Glucose Service. More... | |
| const uint8_t | attHtsSvcUuid [2] |
| Health Thermometer Service. More... | |
| const uint8_t | attDisSvcUuid [2] |
| Device Information Service. More... | |
| const uint8_t | attNwaSvcUuid [2] |
| Network Availability Service. More... | |
| const uint8_t | attWdsSvcUuid [2] |
| Watchdog Service. More... | |
| const uint8_t | attHrsSvcUuid [2] |
| Heart Rate Service. More... | |
| const uint8_t | attPassSvcUuid [2] |
| Phone Alert Status Service. More... | |
| const uint8_t | attBasSvcUuid [2] |
| Battery Service. More... | |
| const uint8_t | attBpsSvcUuid [2] |
| Blood Pressure Service. More... | |
| const uint8_t | attAnsSvcUuid [2] |
| Alert Notification Service. More... | |
| const uint8_t | attHidSvcUuid [2] |
| Human Interface Device Service. More... | |
| const uint8_t | attSpsSvcUuid [2] |
| Scan Parameter Service. More... | |
| const uint8_t | attPlxsSvcUuid [2] |
| Pulse Oximeter Service. More... | |
| const uint8_t | attUdsSvcUuid [2] |
| User Data Service. More... | |
| const uint8_t | attMprvSvcUuid [2] |
| Mesh Provisioning Service. More... | |
| const uint8_t | attMprxSvcUuid [2] |
| Mesh Proxy Service. More... | |
| const uint8_t | attWssSvcUuid [2] |
| Weight scale service. More... | |
| const uint8_t | attCteSvcUuid [2] |
| Constant Tone Extension service. More... | |
GATT UUID Variables | |
| const uint8_t | attPrimSvcUuid [2] |
| Primary Service. More... | |
| const uint8_t | attSecSvcUuid [2] |
| Secondary Service. More... | |
| const uint8_t | attIncUuid [2] |
| Include. More... | |
| const uint8_t | attChUuid [2] |
| Characteristic. More... | |
GATT Characteristic Descriptor UUID Variables | |
| const uint8_t | attChExtUuid [2] |
| Characteristic Extended Properties. More... | |
| const uint8_t | attChUserDescUuid [2] |
| Characteristic User Description. More... | |
| const uint8_t | attCliChCfgUuid [2] |
| Client Characteristic Configuration. More... | |
| const uint8_t | attSrvChCfgUuid [2] |
| Server Characteristic Configuration. More... | |
| const uint8_t | attChPresFmtUuid [2] |
| Characteristic Presentation Format. More... | |
| const uint8_t | attAggFmtUuid [2] |
| Characteristic Aggregate Format. More... | |
| const uint8_t | attHidErmUuid [2] |
| HID External Report Reference. More... | |
| const uint8_t | attHidRimUuid [2] |
| HID Report ID Mapping. More... | |
| const uint8_t | attValRangeUuid [2] |
| Valid Range. More... | |
GATT Characteristic UUID Variables | |
| const uint8_t | attDnChUuid [2] |
| Device Name. More... | |
| const uint8_t | attApChUuid [2] |
| Appearance. More... | |
| const uint8_t | attPpfChUuid [2] |
| Peripheral Privacy Flag. More... | |
| const uint8_t | attRaChUuid [2] |
| Reconnection Address. More... | |
| const uint8_t | attPpcpChUuid [2] |
| Peripheral Preferred Connection Parameters. More... | |
| const uint8_t | attScChUuid [2] |
| Service Changed. More... | |
| const uint8_t | attAlChUuid [2] |
| Alert Level. More... | |
| const uint8_t | attTxpChUuid [2] |
| Tx Power Level. More... | |
| const uint8_t | attDtChUuid [2] |
| Date Time. More... | |
| const uint8_t | attDwChUuid [2] |
| Day of Week. More... | |
| const uint8_t | attDdtChUuid [2] |
| Day Date Time. More... | |
| const uint8_t | attEt100ChUuid [2] |
| Exact Time 100. More... | |
| const uint8_t | attEt256ChUuid [2] |
| Exact Time 256. More... | |
| const uint8_t | attDstoChUuid [2] |
| DST Offset. More... | |
| const uint8_t | attTzChUuid [2] |
| Time Zone. More... | |
| const uint8_t | attLtiChUuid [2] |
| Local Time Information. More... | |
| const uint8_t | attStzChUuid [2] |
| Secondary Time Zone. More... | |
| const uint8_t | attTdstChUuid [2] |
| Time with DST. More... | |
| const uint8_t | attTaChUuid [2] |
| Time Accuracy. More... | |
| const uint8_t | attTsChUuid [2] |
| Time Source. More... | |
| const uint8_t | attRtiChUuid [2] |
| Reference Time Information. More... | |
| const uint8_t | attTbChUuid [2] |
| Time Broadcast. More... | |
| const uint8_t | attTucpChUuid [2] |
| Time Update Control Point. More... | |
| const uint8_t | attTusChUuid [2] |
| Time Update State. More... | |
| const uint8_t | attGlmChUuid [2] |
| Glucose Measurement. More... | |
| const uint8_t | attBlChUuid [2] |
| Battery Level. More... | |
| const uint8_t | attBpsChUuid [2] |
| Battery Power State. More... | |
| const uint8_t | attBlsChUuid [2] |
| Battery Level State. More... | |
| const uint8_t | attTmChUuid [2] |
| Temperature Measurement. More... | |
| const uint8_t | attTtChUuid [2] |
| Temperature Type. More... | |
| const uint8_t | attItChUuid [2] |
| Intermediate Temperature. More... | |
| const uint8_t | attTcelChUuid [2] |
| Temperature Celsius. More... | |
| const uint8_t | attTfahChUuid [2] |
| Temperature Fahrenheit. More... | |
| const uint8_t | attSidChUuid [2] |
| System ID. More... | |
| const uint8_t | attMnsChUuid [2] |
| Model Number String. More... | |
| const uint8_t | attSnsChUuid [2] |
| Serial Number String. More... | |
| const uint8_t | attFrsChUuid [2] |
| Firmware Revision String. More... | |
| const uint8_t | attHrsChUuid [2] |
| Hardware Revision String. More... | |
| const uint8_t | attSrsChUuid [2] |
| Software Revision String. More... | |
| const uint8_t | attMfnsChUuid [2] |
| Manufacturer Name String. More... | |
| const uint8_t | attIeeeChUuid [2] |
| IEEE 11073-20601 Regulatory Certification Data List. More... | |
| const uint8_t | attCtChUuid [2] |
| Current Time. More... | |
| const uint8_t | attElChUuid [2] |
| Elevation. More... | |
| const uint8_t | attLatChUuid [2] |
| Latitude. More... | |
| const uint8_t | attLongChUuid [2] |
| Longitude. More... | |
| const uint8_t | attP2dChUuid [2] |
| Position 2D. More... | |
| const uint8_t | attP3dChUuid [2] |
| Position 3D. More... | |
| const uint8_t | attVidChUuid [2] |
| Vendor ID. More... | |
| const uint8_t | attGlmcChUuid [2] |
| Glucose Measurement Context. More... | |
| const uint8_t | attBpmChUuid [2] |
| Blood Pressure Measurement. More... | |
| const uint8_t | attIcpChUuid [2] |
| Intermediate Cuff Pressure. More... | |
| const uint8_t | attHrmChUuid [2] |
| Heart Rate Measurement. More... | |
| const uint8_t | attBslChUuid [2] |
| Body Sensor Location. More... | |
| const uint8_t | attHrcpChUuid [2] |
| Heart Rate Control Point. More... | |
| const uint8_t | attRemChUuid [2] |
| Removable. More... | |
| const uint8_t | attSrChUuid [2] |
| Service Required. More... | |
| const uint8_t | attStcChUuid [2] |
| Scientific Temperature in Celsius. More... | |
| const uint8_t | attStrChUuid [2] |
| String. More... | |
| const uint8_t | attNwaChUuid [2] |
| Network Availability. More... | |
| const uint8_t | attAsChUuid [2] |
| Alert Status. More... | |
| const uint8_t | attRcpChUuid [2] |
| Ringer Control Point. More... | |
| const uint8_t | attRsChUuid [2] |
| Ringer Setting. More... | |
| const uint8_t | attAcbmChUuid [2] |
| Alert Category ID Bit Mask. More... | |
| const uint8_t | attAcChUuid [2] |
| Alert Category ID. More... | |
| const uint8_t | attAncpChUuid [2] |
| Alert Notification Control Point. More... | |
| const uint8_t | attUasChUuid [2] |
| Unread Alert Status. More... | |
| const uint8_t | attNaChUuid [2] |
| New Alert. More... | |
| const uint8_t | attSnacChUuid [2] |
| Supported New Alert Category. More... | |
| const uint8_t | attSuacChUuid [2] |
| Supported Unread Alert Category. More... | |
| const uint8_t | attBpfChUuid [2] |
| Blood Pressure Feature. More... | |
| const uint8_t | attHidBmiChUuid [2] |
| HID Information. More... | |
| const uint8_t | attHidBkiChUuid [2] |
| HID Information. More... | |
| const uint8_t | attHidBkoChUuid [2] |
| HID Information. More... | |
| const uint8_t | attHidiChUuid [2] |
| HID Information. More... | |
| const uint8_t | attHidRmChUuid [2] |
| Report Map. More... | |
| const uint8_t | attHidcpChUuid [2] |
| HID Control Point. More... | |
| const uint8_t | attHidRepChUuid [2] |
| Report. More... | |
| const uint8_t | attHidPmChUuid [2] |
| Protocol Mode. More... | |
| const uint8_t | attSiwChUuid [2] |
| Scan Interval Window. More... | |
| const uint8_t | attPnpChUuid [2] |
| PnP ID. More... | |
| const uint8_t | attGlfChUuid [2] |
| Glucose Feature. More... | |
| const uint8_t | attRacpChUuid [2] |
| Record Access Control Point. More... | |
| const uint8_t | attCarChUuid [2] |
| Central Address Resolution. More... | |
| const uint8_t | attRsfChUuid [2] |
| Running Speed Features. More... | |
| const uint8_t | attRsmChUuid [2] |
| Running Speed Measurement. More... | |
| const uint8_t | attCpfChUuid [2] |
| Cycling Power Features. More... | |
| const uint8_t | attCpmChUuid [2] |
| Cycling Power Measurement. More... | |
| const uint8_t | attCsfChUuid [2] |
| Cycling Speed Features. More... | |
| const uint8_t | attCsmChUuid [2] |
| Cycling Speed Measurement. More... | |
| const uint8_t | attSlChUuid [2] |
| Sensor Location. More... | |
| const uint8_t | attPlxfChUuid [2] |
| Pulse Oximeter Features. More... | |
| const uint8_t | attPlxscmChUuid [2] |
| Pulse Oximeter Spot Check Measurement. More... | |
| const uint8_t | attPlxcmChUuid [2] |
| Pulse Oximeter Continuous Measurement. More... | |
| const uint8_t | attRpaoChUuid [2] |
| Resolvable Private Address Only. More... | |
| const uint8_t | attDbciChUuid [2] |
| Database Change Increment. More... | |
| const uint8_t | attUiChUuid [2] |
| User Index. More... | |
| const uint8_t | attUcpChUuid [2] |
| User Control Point. More... | |
| const uint8_t | attMprvDinChUuid [2] |
| Mesh Provisioning Data In. More... | |
| const uint8_t | attMprvDoutChUuid [2] |
| Mesh Provisioning Data Out. More... | |
| const uint8_t | attMprxDinChUuid [2] |
| Mesh Proxy Data In. More... | |
| const uint8_t | attMprxDoutChUuid [2] |
| Mesh Proxy Data Out. More... | |
| const uint8_t | attWmChUuid [2] |
| Weight measurement. More... | |
| const uint8_t | attWsfChUuid [2] |
| Weight scale feature. More... | |
| const uint8_t | attGattCsfChUuid [2] |
| Client supported features. More... | |
| const uint8_t | attGattDbhChUuid [2] |
| Database hash. More... | |
| const uint8_t | attCteEnChUuid [2] |
| Constant Tone Extension enable. More... | |
| const uint8_t | attCteMinLenChUuid [2] |
| Constant Tone Extension minimum length. More... | |
| const uint8_t | attCteTxCntChUuid [2] |
| Constant Tone Extension minimum transmit count. More... | |
| const uint8_t | attCteTxDurChUuid [2] |
| Constant Tone Extension transmit duration. More... | |
| const uint8_t | attCteIntChUuid [2] |
| Constant Tone Extension interval. More... | |
| const uint8_t | attCtePhyChUuid [2] |
| Constant Tone Extension PHY. More... | |
| const uint8_t | attSsfChUuid [2] |
| Server supported features. More... | |
EATT Role | |
| #define | EATT_ROLE_INITIATOR L2C_COC_ROLE_INITIATOR |
| #define | EATT_ROLE_ACCEPTOR L2C_COC_ROLE_ACCEPTOR |
EATT Functions | |
| void | EattEstablishChannels (dmConnId_t connId) |
| Begin requesting EATT L2CAP coc channels. More... | |
| uint8_t | EattGetNumChannelsInUse (dmConnId_t connId) |
| Returns the number of open EATT channels on a given connection. More... | |
| void | EattInit (uint8_t roleBits) |
| Initialize the Enhanced ATT subsystem. More... | |
| #define ATT_128_UUID_LEN 16 |
Length in bytes of a 128 bit UUID.
Definition at line 248 of file att_defs.h.
| #define ATT_16_UUID_LEN 2 |
Length in bytes of a 16 bit UUID.
Definition at line 247 of file att_defs.h.
| #define ATT_AUTH_SIG_LEN 12 |
Authentication signature length.
Definition at line 43 of file att_defs.h.
| #define ATT_CBACK_END ATT_EATT_RECONFIG_CMPL_IND |
| #define ATT_CBACK_START 0x02 |
| #define ATT_CLIENT_CFG_INDICATE 0x0002 |
Indicate the value.
Definition at line 278 of file att_defs.h.
| #define ATT_CLIENT_CFG_NOTIFY 0x0001 |
Notify the value.
Definition at line 277 of file att_defs.h.
| #define ATT_CONTINUING 0x79 |
Procedure continuing.
Definition at line 107 of file att_defs.h.
| #define ATT_CSF_LEN 1 |
Length of client supported features array.
Definition at line 338 of file att_defs.h.
| #define ATT_DATABASE_HASH_LEN 16 |
Database hash length.
Definition at line 325 of file att_defs.h.
| #define ATT_DEFAULT_MTU 23 |
Default value of ATT_MTU.
Definition at line 44 of file att_defs.h.
| #define ATT_DEFAULT_PAYLOAD_LEN 20 |
Default maximum payload length for most PDUs.
Definition at line 46 of file att_defs.h.
| #define ATT_ERR_AUTH 0x05 |
Insufficient authentication.
Definition at line 73 of file att_defs.h.
| #define ATT_ERR_AUTHOR 0x08 |
Insufficient authorization.
Definition at line 76 of file att_defs.h.
| #define ATT_ERR_CANCELLED 0x74 |
Request cancelled.
Definition at line 102 of file att_defs.h.
| #define ATT_ERR_CCCD 0xFD |
CCCD improperly configured.
Definition at line 89 of file att_defs.h.
| #define ATT_ERR_DATABASE_OUT_OF_SYNC 0x12 |
Client out of synch with database.
Definition at line 86 of file att_defs.h.
| #define ATT_ERR_ENC 0x0F |
Insufficient encryption.
Definition at line 83 of file att_defs.h.
| #define ATT_ERR_GROUP_TYPE 0x10 |
Unsupported group type.
Definition at line 84 of file att_defs.h.
| #define ATT_ERR_HANDLE 0x01 |
Invalid handle.
Definition at line 69 of file att_defs.h.
| #define ATT_ERR_IN_PROGRESS 0xFE |
Procedure already in progress.
Definition at line 90 of file att_defs.h.
| #define ATT_ERR_INVALID_CHANGE_CTR 0x80 |
Invalid change counter.
Definition at line 116 of file att_defs.h.
| #define ATT_ERR_INVALID_PDU 0x04 |
Invalid pdu.
Definition at line 72 of file att_defs.h.
| #define ATT_ERR_INVALID_RSP 0x73 |
Invalid response PDU.
Definition at line 101 of file att_defs.h.
| #define ATT_ERR_KEY_SIZE 0x0C |
Insufficient encryption key size.
Definition at line 80 of file att_defs.h.
| #define ATT_ERR_LENGTH 0x0D |
Invalid attribute value length.
Definition at line 81 of file att_defs.h.
| #define ATT_ERR_MEMORY 0x70 |
Out of memory.
Definition at line 98 of file att_defs.h.
| #define ATT_ERR_MTU_EXCEEDED 0x77 |
Attribute PDU length exceeded MTU size.
Definition at line 105 of file att_defs.h.
| #define ATT_ERR_MUTE_DISABLE 0x82 |
Mute disable.
Definition at line 118 of file att_defs.h.
| #define ATT_ERR_NO_CHANNEL 0x78 |
No enhanced channel available.
Definition at line 106 of file att_defs.h.
| #define ATT_ERR_NOT_FOUND 0x0A |
Attribute not found.
Definition at line 78 of file att_defs.h.
| #define ATT_ERR_NOT_LONG 0x0B |
Attribute not long.
Definition at line 79 of file att_defs.h.
| #define ATT_ERR_NOT_SUP 0x06 |
Request not supported.
Definition at line 74 of file att_defs.h.
| #define ATT_ERR_OFFSET 0x07 |
Invalid offset.
Definition at line 75 of file att_defs.h.
| #define ATT_ERR_OPCODE_NOT_SUPPORTED 0x81 |
Opcode out of range.
Definition at line 117 of file att_defs.h.
| #define ATT_ERR_OVERFLOW 0x72 |
Transaction overflow.
Definition at line 100 of file att_defs.h.
| #define ATT_ERR_QUEUE_FULL 0x09 |
Prepare queue full.
Definition at line 77 of file att_defs.h.
| #define ATT_ERR_RANGE 0xFF |
Value out of range.
Definition at line 91 of file att_defs.h.
| #define ATT_ERR_READ 0x02 |
Read not permitted.
Definition at line 70 of file att_defs.h.
| #define ATT_ERR_REQ_NOT_FOUND 0x76 |
Required characteristic not found.
Definition at line 104 of file att_defs.h.
| #define ATT_ERR_RESOURCES 0x11 |
Insufficient resources.
Definition at line 85 of file att_defs.h.
| #define ATT_ERR_RSP_LEN 5 |
Error response length.
Definition at line 175 of file att_defs.h.
| #define ATT_ERR_TIMEOUT 0x71 |
Transaction timeout.
Definition at line 99 of file att_defs.h.
| #define ATT_ERR_UNDEFINED 0x75 |
Other undefined error.
Definition at line 103 of file att_defs.h.
| #define ATT_ERR_UNLIKELY 0x0E |
Other unlikely error.
Definition at line 82 of file att_defs.h.
| #define ATT_ERR_VALUE_NOT_ALLOWED 0x13 |
Value not allowed.
Definition at line 87 of file att_defs.h.
| #define ATT_ERR_VALUE_RANGE 0x80 |
Value out of range.
Definition at line 115 of file att_defs.h.
| #define ATT_ERR_VALUE_RANGE_x83 0x83 |
Value out of range 0x83.
Definition at line 119 of file att_defs.h.
| #define ATT_ERR_WRITE 0x03 |
Write not permitted.
Definition at line 71 of file att_defs.h.
| #define ATT_ERR_WRITE_REJ 0xFC |
Write request rejected.
Definition at line 88 of file att_defs.h.
| #define ATT_EXEC_WRITE_ALL 0x01 |
Write all pending prepared writes.
Definition at line 221 of file att_defs.h.
| #define ATT_EXEC_WRITE_CANCEL 0x00 |
Cancel all prepared writes.
Definition at line 220 of file att_defs.h.
| #define ATT_EXEC_WRITE_REQ_LEN 2 |
Execute write request length.
Definition at line 198 of file att_defs.h.
| #define ATT_EXEC_WRITE_RSP_LEN 1 |
Execute write response length.
Definition at line 199 of file att_defs.h.
| #define ATT_EXT_PROP_RELIABLE_WRITE 0x0001 |
Permit reliable writes.
Definition at line 269 of file att_defs.h.
| #define ATT_EXT_PROP_WRITEABLE_AUX 0x0002 |
Permit write to characteristic descriptor.
Definition at line 270 of file att_defs.h.
| #define ATT_FIND_HANDLE_128_UUID 0x02 |
Handle and 128 bit UUID.
Definition at line 213 of file att_defs.h.
| #define ATT_FIND_HANDLE_16_UUID 0x01 |
Handle and 16 bit UUID.
Definition at line 212 of file att_defs.h.
| #define ATT_FIND_INFO_REQ_LEN 5 |
Find information request length.
Definition at line 178 of file att_defs.h.
| #define ATT_FIND_INFO_RSP_LEN 2 |
Find information response length.
Definition at line 179 of file att_defs.h.
| #define ATT_FIND_TYPE_REQ_LEN 7 |
Find type request length.
Definition at line 180 of file att_defs.h.
| #define ATT_FIND_TYPE_RSP_LEN 1 |
Find type response length.
Definition at line 181 of file att_defs.h.
| #define ATT_FORMAT_2BIT 0x02 |
Unsigned 2 bit integer.
Definition at line 293 of file att_defs.h.
| #define ATT_FORMAT_BOOLEAN 0x01 |
Boolean.
Definition at line 292 of file att_defs.h.
| #define ATT_FORMAT_DUINT16 0x18 |
IEEE-20601 format.
Definition at line 315 of file att_defs.h.
| #define ATT_FORMAT_FLOAT 0x17 |
IEEE-11073 32 bit FLOAT.
Definition at line 314 of file att_defs.h.
| #define ATT_FORMAT_FLOAT32 0x14 |
IEEE-754 32 bit floating point.
Definition at line 311 of file att_defs.h.
| #define ATT_FORMAT_FLOAT64 0x15 |
IEEE-754 64 bit floating point.
Definition at line 312 of file att_defs.h.
| #define ATT_FORMAT_NIBBLE 0x03 |
Unsigned 4 bit integer.
Definition at line 294 of file att_defs.h.
| #define ATT_FORMAT_SFLOAT 0x16 |
IEEE-11073 16 bit SFLOAT.
Definition at line 313 of file att_defs.h.
| #define ATT_FORMAT_SINT12 0x0D |
Signed 12 bit integer.
Definition at line 304 of file att_defs.h.
| #define ATT_FORMAT_SINT128 0x13 |
Signed 128 bit integer.
Definition at line 310 of file att_defs.h.
| #define ATT_FORMAT_SINT16 0x0E |
Signed 16 bit integer.
Definition at line 305 of file att_defs.h.
| #define ATT_FORMAT_SINT24 0x0F |
Signed 24 bit integer.
Definition at line 306 of file att_defs.h.
| #define ATT_FORMAT_SINT32 0x10 |
Signed 32 bit integer.
Definition at line 307 of file att_defs.h.
| #define ATT_FORMAT_SINT48 0x11 |
Signed 48 bit integer.
Definition at line 308 of file att_defs.h.
| #define ATT_FORMAT_SINT64 0x12 |
Signed 64 bit integer.
Definition at line 309 of file att_defs.h.
| #define ATT_FORMAT_SINT8 0x0C |
Signed 8 bit integer.
Definition at line 303 of file att_defs.h.
| #define ATT_FORMAT_STRUCT 0x1B |
Opaque structure.
Definition at line 318 of file att_defs.h.
| #define ATT_FORMAT_UINT12 0x05 |
Unsigned 12 bit integer.
Definition at line 296 of file att_defs.h.
| #define ATT_FORMAT_UINT128 0x0B |
Unsigned 128 bit integer.
Definition at line 302 of file att_defs.h.
| #define ATT_FORMAT_UINT16 0x06 |
Unsigned 16 bit integer.
Definition at line 297 of file att_defs.h.
| #define ATT_FORMAT_UINT24 0x07 |
Unsigned 24 bit integer.
Definition at line 298 of file att_defs.h.
| #define ATT_FORMAT_UINT32 0x08 |
Unsigned 32 bit integer.
Definition at line 299 of file att_defs.h.
| #define ATT_FORMAT_UINT48 0x09 |
Unsigned 48 bit integer.
Definition at line 300 of file att_defs.h.
| #define ATT_FORMAT_UINT64 0x0A |
Unsigned 64 bit integer.
Definition at line 301 of file att_defs.h.
| #define ATT_FORMAT_UINT8 0x04 |
Unsigned 8 bit integer.
Definition at line 295 of file att_defs.h.
| #define ATT_FORMAT_UTF16 0x1A |
UTF-16 string.
Definition at line 317 of file att_defs.h.
| #define ATT_FORMAT_UTF8 0x19 |
UTF-8 string.
Definition at line 316 of file att_defs.h.
| #define ATT_HANDLE_MAX 0xFFFF |
Handle max.
Definition at line 239 of file att_defs.h.
| #define ATT_HANDLE_NONE 0x0000 |
Handle none.
Definition at line 237 of file att_defs.h.
| #define ATT_HANDLE_START 0x0001 |
Handle start.
Definition at line 238 of file att_defs.h.
| #define ATT_HCI_ERR_BASE 0x20 |
Base value for HCI error status values passed through ATT. Since the values of HCI and ATT error codes overlap, the constant ATT_HCI_ERR_BASE is added to HCI error codes before being passed through ATT. See HCI_SUCCESS for HCI error code values.
Definition at line 131 of file att_defs.h.
| #define ATT_HDR_LEN 1 |
Attribute PDU header length.
Definition at line 42 of file att_defs.h.
| #define ATT_MAX_MTU 517 |
Maximum value of ATT_MTU.
Definition at line 45 of file att_defs.h.
| #define ATT_MAX_TRANS_TIMEOUT 30 |
Maximum transaction timeout in seconds.
Definition at line 61 of file att_defs.h.
| #define ATT_MTU_REQ_LEN 3 |
MTU request length.
Definition at line 176 of file att_defs.h.
| #define ATT_MTU_RSP_LEN 3 |
MTU response length.
Definition at line 177 of file att_defs.h.
| #define ATT_NO_UUID_LEN 0 |
Length when no UUID is present ;-)
Definition at line 246 of file att_defs.h.
| #define ATT_PDU_ERR_RSP 0x01 |
Error response.
Definition at line 138 of file att_defs.h.
| #define ATT_PDU_EXEC_WRITE_REQ 0x18 |
Execute write request.
Definition at line 161 of file att_defs.h.
| #define ATT_PDU_EXEC_WRITE_RSP 0x19 |
Execute write response.
Definition at line 162 of file att_defs.h.
| #define ATT_PDU_FIND_INFO_REQ 0x04 |
Find information request.
Definition at line 141 of file att_defs.h.
| #define ATT_PDU_FIND_INFO_RSP 0x05 |
Find information response.
Definition at line 142 of file att_defs.h.
| #define ATT_PDU_FIND_TYPE_REQ 0x06 |
Find by type value request.
Definition at line 143 of file att_defs.h.
| #define ATT_PDU_FIND_TYPE_RSP 0x07 |
Find by type value response.
Definition at line 144 of file att_defs.h.
| #define ATT_PDU_MASK_COMMAND 0x40 |
Command bit mask.
Definition at line 229 of file att_defs.h.
| #define ATT_PDU_MASK_SERVER 0x01 |
Server bit mask.
Definition at line 228 of file att_defs.h.
| #define ATT_PDU_MASK_SIGNED 0x80 |
Auth signature bit mask.
Definition at line 230 of file att_defs.h.
| #define ATT_PDU_MTU_REQ 0x02 |
Exchange mtu request.
Definition at line 139 of file att_defs.h.
| #define ATT_PDU_MTU_RSP 0x03 |
Exchange mtu response.
Definition at line 140 of file att_defs.h.
| #define ATT_PDU_MULT_VALUE_NTF 0x23 |
Handle value multiple notification.
Definition at line 168 of file att_defs.h.
| #define ATT_PDU_MULT_VALUE_NTF_LEN 1 |
Base multiple variable notification length.
Definition at line 205 of file att_defs.h.
| #define ATT_PDU_PREP_WRITE_REQ 0x16 |
Prepare write request.
Definition at line 159 of file att_defs.h.
| #define ATT_PDU_PREP_WRITE_RSP 0x17 |
Prepare write response.
Definition at line 160 of file att_defs.h.
| #define ATT_PDU_READ_BLOB_REQ 0x0C |
Read blob request.
Definition at line 149 of file att_defs.h.
| #define ATT_PDU_READ_BLOB_RSP 0x0D |
Read blob response.
Definition at line 150 of file att_defs.h.
| #define ATT_PDU_READ_GROUP_TYPE_REQ 0x10 |
Read by group type request.
Definition at line 153 of file att_defs.h.
| #define ATT_PDU_READ_GROUP_TYPE_RSP 0x11 |
Read by group type response.
Definition at line 154 of file att_defs.h.
| #define ATT_PDU_READ_MULT_REQ 0x0E |
Read multiple request.
Definition at line 151 of file att_defs.h.
| #define ATT_PDU_READ_MULT_RSP 0x0F |
Read multiple response.
Definition at line 152 of file att_defs.h.
| #define ATT_PDU_READ_MULT_VAR_REQ 0x20 |
Read multiple variable length request.
Definition at line 166 of file att_defs.h.
| #define ATT_PDU_READ_MULT_VAR_RSP 0x21 |
Read multiple variable length response.
Definition at line 167 of file att_defs.h.
| #define ATT_PDU_READ_REQ 0x0A |
Read request.
Definition at line 147 of file att_defs.h.
| #define ATT_PDU_READ_RSP 0x0B |
Read response.
Definition at line 148 of file att_defs.h.
| #define ATT_PDU_READ_TYPE_REQ 0x08 |
Read by type request.
Definition at line 145 of file att_defs.h.
| #define ATT_PDU_READ_TYPE_RSP 0x09 |
Read by type response.
Definition at line 146 of file att_defs.h.
| #define ATT_PDU_SIGNED_WRITE_CMD 0xD2 |
Signed write command.
Definition at line 158 of file att_defs.h.
| #define ATT_PDU_VALUE_CNF 0x1E |
Handle value confirmation.
Definition at line 165 of file att_defs.h.
| #define ATT_PDU_VALUE_IND 0x1D |
Handle value indication.
Definition at line 164 of file att_defs.h.
| #define ATT_PDU_VALUE_NTF 0x1B |
Handle value notification.
Definition at line 163 of file att_defs.h.
| #define ATT_PDU_WRITE_CMD 0x52 |
Write command.
Definition at line 157 of file att_defs.h.
| #define ATT_PDU_WRITE_REQ 0x12 |
Write request.
Definition at line 155 of file att_defs.h.
| #define ATT_PDU_WRITE_RSP 0x13 |
Write response.
Definition at line 156 of file att_defs.h.
| #define ATT_PREP_WRITE_REQ_LEN 5 |
Prepared write command length.
Definition at line 196 of file att_defs.h.
| #define ATT_PREP_WRITE_RSP_LEN 5 |
Prepared write response length.
Definition at line 197 of file att_defs.h.
| #define ATT_PROP_AUTHENTICATED 0x40 |
Permit signed writes.
Definition at line 261 of file att_defs.h.
| #define ATT_PROP_BROADCAST 0x01 |
Permit broadcasts.
Definition at line 255 of file att_defs.h.
| #define ATT_PROP_EXTENDED 0x80 |
More properties defined in extended properties.
Definition at line 262 of file att_defs.h.
| #define ATT_PROP_INDICATE 0x20 |
Permit indications.
Definition at line 260 of file att_defs.h.
| #define ATT_PROP_NOTIFY 0x10 |
Permit notifications.
Definition at line 259 of file att_defs.h.
| #define ATT_PROP_READ 0x02 |
Permit reads.
Definition at line 256 of file att_defs.h.
| #define ATT_PROP_WRITE 0x08 |
Permit writes with response.
Definition at line 258 of file att_defs.h.
| #define ATT_PROP_WRITE_NO_RSP 0x04 |
Permit writes without response.
Definition at line 257 of file att_defs.h.
| #define ATT_READ_BLOB_REQ_LEN 5 |
Read blob request legnth.
Definition at line 186 of file att_defs.h.
| #define ATT_READ_BLOB_RSP_LEN 1 |
Read blob response length.
Definition at line 187 of file att_defs.h.
| #define ATT_READ_GROUP_TYPE_REQ_LEN 5 |
Read group type request length.
Definition at line 190 of file att_defs.h.
| #define ATT_READ_GROUP_TYPE_RSP_LEN 2 |
Read group type response length.
Definition at line 191 of file att_defs.h.
| #define ATT_READ_MULT_REQ_LEN 1 |
Read multiple request length.
Definition at line 188 of file att_defs.h.
| #define ATT_READ_MULT_RSP_LEN 1 |
Read multiple response length.
Definition at line 189 of file att_defs.h.
| #define ATT_READ_MULT_VAR_REQ_LEN 1 |
Base read multiple variable request length.
Definition at line 203 of file att_defs.h.
| #define ATT_READ_MULT_VAR_RSP_LEN 1 |
Base read multiple variable response length.
Definition at line 204 of file att_defs.h.
| #define ATT_READ_REQ_LEN 3 |
Read request length.
Definition at line 184 of file att_defs.h.
| #define ATT_READ_RSP_LEN 1 |
Read response length.
Definition at line 185 of file att_defs.h.
| #define ATT_READ_TYPE_REQ_LEN 5 |
Read type request length.
Definition at line 182 of file att_defs.h.
| #define ATT_READ_TYPE_RSP_LEN 2 |
Read type response length.
Definition at line 183 of file att_defs.h.
| #define ATT_RSP_PENDING 0x7A |
Response delayed pending higher layer.
Definition at line 108 of file att_defs.h.
| #define ATT_SERVER_CFG_BROADCAST 0x0001 |
Broadcast the value.
Definition at line 285 of file att_defs.h.
| #define ATT_SIGNED_WRITE_CMD_LEN (ATT_WRITE_CMD_LEN + ATT_AUTH_SIG_LEN) |
Signed write command length.
Definition at line 195 of file att_defs.h.
| #define ATT_SUCCESS 0x00 |
Operation successful.
Definition at line 68 of file att_defs.h.
| #define ATT_UUID_11073_CERT_DATA 0x2A2A |
IEEE 11073-20601 Regulatory Certification Data List.
Definition at line 148 of file att_uuid.h.
| #define ATT_UUID_ABSORBED_DOSE_GRAY 0x2733 |
absorbed dose gray
Definition at line 267 of file att_uuid.h.
| #define ATT_UUID_ACCELERATION_MPS_SQ 0x2713 |
acceleration metres per second squared
Definition at line 236 of file att_uuid.h.
| #define ATT_UUID_AGGREGATE_FORMAT 0x2905 |
Characteristic Aggregate Format.
Definition at line 96 of file att_uuid.h.
| #define ATT_UUID_ALERT_CAT_ID 0x2A43 |
Alert Category ID.
Definition at line 173 of file att_uuid.h.
| #define ATT_UUID_ALERT_CAT_ID_MASK 0x2A42 |
Alert Category ID Bit Mask.
Definition at line 172 of file att_uuid.h.
| #define ATT_UUID_ALERT_LEVEL 0x2A06 |
Alert Level.
Definition at line 112 of file att_uuid.h.
| #define ATT_UUID_ALERT_NOTIF_CP 0x2A44 |
Alert Notification Control Point.
Definition at line 174 of file att_uuid.h.
| #define ATT_UUID_ALERT_NOTIF_SERVICE 0x1811 |
Alert Notification Service.
Definition at line 61 of file att_uuid.h.
| #define ATT_UUID_ALERT_STATUS 0x2A3F |
Alert Status.
Definition at line 169 of file att_uuid.h.
| #define ATT_UUID_AMOUNT_CONC_MOLE_PER_CU_M 0x271A |
amount concentration mole per cubic metre
Definition at line 243 of file att_uuid.h.
| #define ATT_UUID_AMOUNT_OF_SUBSTANCE_MOLE 0x2706 |
amount of substance mole
Definition at line 231 of file att_uuid.h.
| #define ATT_UUID_ANG_ACCEL_R_PER_SEC_SQD 0x2744 |
angular acceleration radian per second squared
Definition at line 274 of file att_uuid.h.
| #define ATT_UUID_ANG_VELOCITY_R_PER_SEC 0x2743 |
angular velocity radian per second
Definition at line 273 of file att_uuid.h.
| #define ATT_UUID_ANG_VELOCITY_RPM 0x27A8 |
angular velocity revolution per minute
Definition at line 320 of file att_uuid.h.
| #define ATT_UUID_APPEARANCE 0x2A01 |
Appearance.
Definition at line 107 of file att_uuid.h.
| #define ATT_UUID_AREA_BARN 0x2784 |
area barn
Definition at line 307 of file att_uuid.h.
| #define ATT_UUID_AREA_HECTARE 0x2766 |
area hectare
Definition at line 300 of file att_uuid.h.
| #define ATT_UUID_AREA_SQ_M 0x2710 |
area square metres
Definition at line 233 of file att_uuid.h.
| #define ATT_UUID_ARM_BASE |
Base UUID: E0262760-08C2-11E1-9073-0E8AC72EXXXX.
Definition at line 341 of file att_uuid.h.
| #define ATT_UUID_ARM_BUILD | ( | part | ) | UINT16_TO_BYTES(part), ATT_UUID_ARM_BASE |
Macro for building Arm Ltd. UUIDs.
Definition at line 345 of file att_uuid.h.
| #define ATT_UUID_BATTERY_LEVEL 0x2A19 |
Battery Level.
Definition at line 131 of file att_uuid.h.
| #define ATT_UUID_BATTERY_LEVEL_STATE 0x2A1B |
Battery Level State.
Definition at line 133 of file att_uuid.h.
| #define ATT_UUID_BATTERY_POWER_STATE 0x2A1A |
Battery Power State.
Definition at line 132 of file att_uuid.h.
| #define ATT_UUID_BATTERY_SERVICE 0x180F |
Battery Service.
Definition at line 59 of file att_uuid.h.
| #define ATT_UUID_BLOOD_PRESSURE_SERVICE 0x1810 |
Blood Pressure Service.
Definition at line 60 of file att_uuid.h.
| #define ATT_UUID_BP_FEATURE 0x2A49 |
Blood Pressure Feature.
Definition at line 179 of file att_uuid.h.
| #define ATT_UUID_BP_MEAS 0x2A35 |
Blood Pressure Measurement.
Definition at line 159 of file att_uuid.h.
| #define ATT_UUID_C_TEMP_DEG_C 0x272F |
Celsius temperature degree Celsius.
Definition at line 263 of file att_uuid.h.
| #define ATT_UUID_CAPACITANCE_F 0x2729 |
capacitance farad
Definition at line 257 of file att_uuid.h.
| #define ATT_UUID_CAR 0x2AA6 |
Central Address Resolution.
Definition at line 189 of file att_uuid.h.
| #define ATT_UUID_CATALYTIC_ACTIVITY_KATAL 0x2735 |
catalytic activity katal
Definition at line 269 of file att_uuid.h.
| #define ATT_UUID_CATALYTIC_KATAL_PER_CU_M 0x2757 |
catalytic activity concentration katal per cubic metre
Definition at line 293 of file att_uuid.h.
| #define ATT_UUID_CHAR_PRES_FORMAT 0x2904 |
Characteristic Presentation Format.
Definition at line 95 of file att_uuid.h.
| #define ATT_UUID_CHAR_USER_DESC 0x2901 |
Characteristic User Description.
Definition at line 92 of file att_uuid.h.
| #define ATT_UUID_CHARACTERISTIC 0x2803 |
Characteristic.
Definition at line 84 of file att_uuid.h.
| #define ATT_UUID_CHARACTERISTIC_EXT 0x2900 |
Characteristic Extended Properties.
Definition at line 91 of file att_uuid.h.
| #define ATT_UUID_CLIENT_CHAR_CONFIG 0x2902 |
Client Characteristic Configuration.
Definition at line 93 of file att_uuid.h.
| #define ATT_UUID_CLIENT_SUPPORTED_FEATURES 0x2B29 |
Client Supported Features.
Definition at line 210 of file att_uuid.h.
| #define ATT_UUID_CONSTANT_TONE_SERVICE 0x7F7F |
Constant Tone Extension.
Definition at line 73 of file att_uuid.h.
| #define ATT_UUID_CTE_ENABLE 0x7F80 |
Constant Tone Extension enable.
Definition at line 213 of file att_uuid.h.
| #define ATT_UUID_CTE_INTERVAL 0x7F84 |
Constant Tone Extension interval.
Definition at line 217 of file att_uuid.h.
| #define ATT_UUID_CTE_MIN_LEN 0x7F81 |
Constant Tone Extension minimum length.
Definition at line 214 of file att_uuid.h.
| #define ATT_UUID_CTE_PHY 0x7F85 |
Constant Tone Extension PHY.
Definition at line 218 of file att_uuid.h.
| #define ATT_UUID_CTE_TX_CNT 0x7F82 |
Constant Tone Extension transmit count.
Definition at line 215 of file att_uuid.h.
| #define ATT_UUID_CTE_TX_DURATION 0x7F83 |
Constant Tone Extension transmit duration.
Definition at line 216 of file att_uuid.h.
| #define ATT_UUID_CURRENT_DENS_AMP_PER_SQ_M 0x2718 |
current density ampere per square metre
Definition at line 241 of file att_uuid.h.
| #define ATT_UUID_CURRENT_TIME 0x2A2B |
Current Time.
Definition at line 149 of file att_uuid.h.
| #define ATT_UUID_CURRENT_TIME_SERVICE 0x1805 |
Current Time Service.
Definition at line 49 of file att_uuid.h.
| #define ATT_UUID_CYCLING_POWER_FEATURE 0x2A65 |
Cycling Power Feature.
Definition at line 195 of file att_uuid.h.
| #define ATT_UUID_CYCLING_POWER_MEASUREMENT 0x2A63 |
Cycling Power Measurement.
Definition at line 196 of file att_uuid.h.
| #define ATT_UUID_CYCLING_POWER_SERVICE 0x1818 |
Cycling Power Service.
Definition at line 66 of file att_uuid.h.
| #define ATT_UUID_CYCLING_SPEED_FEATURE 0x2A5C |
Cycling Speed Feature.
Definition at line 197 of file att_uuid.h.
| #define ATT_UUID_CYCLING_SPEED_MEASUREMENT 0x2A5B |
Cycling Speed Measurement.
Definition at line 198 of file att_uuid.h.
| #define ATT_UUID_CYCLING_SPEED_SERVICE 0x1816 |
Cycling Speed Service.
Definition at line 65 of file att_uuid.h.
| #define ATT_UUID_D1_DATA ATT_UUID_ARM_BUILD(ATT_UUID_D1_DATA_PART) |
Proprietary characteristics.
Definition at line 358 of file att_uuid.h.
| #define ATT_UUID_D1_DATA_PART 0x0001 |
Partial proprietary characteristic data D1 UUID.
Definition at line 352 of file att_uuid.h.
| #define ATT_UUID_DATABASE_HASH 0x2B2A |
Database Hash.
Definition at line 211 of file att_uuid.h.
| #define ATT_UUID_DATE_TIME 0x2A08 |
Date Time.
Definition at line 114 of file att_uuid.h.
| #define ATT_UUID_DAY_DATE_TIME 0x2A0A |
Day Date Time.
Definition at line 116 of file att_uuid.h.
| #define ATT_UUID_DAY_OF_WEEK 0x2A09 |
Day of Week.
Definition at line 115 of file att_uuid.h.
| #define ATT_UUID_DB_CHANGE_INCREMENT 0x2A99 |
Database Change Increment.
Definition at line 200 of file att_uuid.h.
| #define ATT_UUID_DENSITY_KG_PER_CU_M 0x2715 |
density kilogram per cubic metre
Definition at line 238 of file att_uuid.h.
| #define ATT_UUID_DEVICE_INFO_SERVICE 0x180A |
Device Information Service.
Definition at line 54 of file att_uuid.h.
| #define ATT_UUID_DEVICE_NAME 0x2A00 |
Device Name.
Definition at line 106 of file att_uuid.h.
| #define ATT_UUID_DOSE_EQUIVALENT_SIEVERT 0x2734 |
dose equivalent sievert
Definition at line 268 of file att_uuid.h.
| #define ATT_UUID_DOSE_RATE_GRAY_PER_SEC 0x2754 |
absorbed dose rate gray per second
Definition at line 290 of file att_uuid.h.
| #define ATT_UUID_DST_CHANGE_SERVICE 0x1807 |
Next DST Change Service.
Definition at line 51 of file att_uuid.h.
| #define ATT_UUID_DST_OFFSET 0x2A0D |
DST Offset.
Definition at line 119 of file att_uuid.h.
| #define ATT_UUID_DYNAMIC_VISC_PASCAL_SEC 0x2740 |
dynamic viscosity pascal second
Definition at line 270 of file att_uuid.h.
| #define ATT_UUID_ELEC_CHG_DENS_C_PER_CU_M 0x274C |
electric charge density coulomb per cubic metre
Definition at line 282 of file att_uuid.h.
| #define ATT_UUID_ELEC_FIELD_STR_VOLT_PER_M 0x274B |
electric field strength volt per metre
Definition at line 281 of file att_uuid.h.
| #define ATT_UUID_ELEC_FLUX_DENS_C_PER_SQ_M 0x274E |
electric flux density coulomb per square metre
Definition at line 284 of file att_uuid.h.
| #define ATT_UUID_ELECTRIC_CHG_AMP_HRS 0x27B0 |
electric charge ampere hours
Definition at line 328 of file att_uuid.h.
| #define ATT_UUID_ELECTRIC_CHG_C 0x2727 |
electric charge coulomb
Definition at line 255 of file att_uuid.h.
| #define ATT_UUID_ELECTRIC_COND_SIEMENS 0x272B |
electric conductance siemens
Definition at line 259 of file att_uuid.h.
| #define ATT_UUID_ELECTRIC_CURRENT_AMP 0x2704 |
electric current ampere
Definition at line 229 of file att_uuid.h.
| #define ATT_UUID_ELECTRIC_POTENTIAL_VOLT 0x2728 |
electric potential difference volt
Definition at line 256 of file att_uuid.h.
| #define ATT_UUID_ELECTRIC_RESISTANCE_OHM 0x272A |
electric resistance ohm
Definition at line 258 of file att_uuid.h.
| #define ATT_UUID_ELEVATION 0x2A2C |
Elevation.
Definition at line 150 of file att_uuid.h.
| #define ATT_UUID_ENERGY_DENSITY_J_PER_CU_M 0x274A |
energy density joule per cubic metre
Definition at line 280 of file att_uuid.h.
| #define ATT_UUID_ENERGY_GRAM_CALORIE 0x27A9 |
energy gram calorie
Definition at line 321 of file att_uuid.h.
| #define ATT_UUID_ENERGY_J 0x2725 |
energy joule
Definition at line 253 of file att_uuid.h.
| #define ATT_UUID_ENERGY_KG_CALORIE 0x27AA |
energy kilogram calorie
Definition at line 322 of file att_uuid.h.
| #define ATT_UUID_ENERGY_KILOWATT_HR 0x27AB |
energy kilowatt hour
Definition at line 323 of file att_uuid.h.
| #define ATT_UUID_EXACT_TIME_100 0x2A0B |
Exact Time 100.
Definition at line 117 of file att_uuid.h.
| #define ATT_UUID_EXACT_TIME_256 0x2A0C |
Exact Time 256.
Definition at line 118 of file att_uuid.h.
| #define ATT_UUID_EXPOSURE_C_PER_KG 0x2753 |
exposure coulomb per kilogram
Definition at line 289 of file att_uuid.h.
| #define ATT_UUID_FIRMWARE_REV 0x2A26 |
Firmware Revision String.
Definition at line 144 of file att_uuid.h.
| #define ATT_UUID_FORCE_NEWT 0x2723 |
force newton
Definition at line 251 of file att_uuid.h.
| #define ATT_UUID_FREQUENCY_HERTZ 0x2722 |
frequency hertz
Definition at line 250 of file att_uuid.h.
| #define ATT_UUID_GAP_SERVICE 0x1800 |
Generic Access Profile Service.
Definition at line 44 of file att_uuid.h.
| #define ATT_UUID_GATT_SERVICE 0x1801 |
Generic Attribute Profile Service.
Definition at line 45 of file att_uuid.h.
| #define ATT_UUID_GLUCOSE_FEATURE 0x2A51 |
Glucose Feature.
Definition at line 187 of file att_uuid.h.
| #define ATT_UUID_GLUCOSE_MEAS 0x2A18 |
Glucose Measurement.
Definition at line 130 of file att_uuid.h.
| #define ATT_UUID_GLUCOSE_MEAS_CONTEXT 0x2A34 |
Glucose Measurement Context.
Definition at line 158 of file att_uuid.h.
| #define ATT_UUID_GLUCOSE_SERVICE 0x1808 |
Glucose Service.
Definition at line 52 of file att_uuid.h.
| #define ATT_UUID_HARDWARE_REV 0x2A27 |
Hardware Revision String.
Definition at line 145 of file att_uuid.h.
| #define ATT_UUID_HEALTH_THERM_SERVICE 0x1809 |
Health Thermometer Service.
Definition at line 53 of file att_uuid.h.
| #define ATT_UUID_HEART_RATE_SERVICE 0x180D |
Heart Rate Service.
Definition at line 57 of file att_uuid.h.
| #define ATT_UUID_HEAT_CAP_J_PER_K 0x2746 |
heat capacity joule per kelvin
Definition at line 276 of file att_uuid.h.
| #define ATT_UUID_HEAT_FLUX_DEN_W_PER_SQ_M 0x2745 |
heat flux density watt per square metre
Definition at line 275 of file att_uuid.h.
| #define ATT_UUID_HID_BOOT_KEYBOARD_IN 0x2A22 |
HID Boot Keyboard In.
Definition at line 140 of file att_uuid.h.
| #define ATT_UUID_HID_BOOT_KEYBOARD_OUT 0x2A32 |
HID Boot Keyboard Out.
Definition at line 156 of file att_uuid.h.
| #define ATT_UUID_HID_BOOT_MOUSE_IN 0x2A33 |
HID Boot Mouse In.
Definition at line 157 of file att_uuid.h.
| #define ATT_UUID_HID_CONTROL_POINT 0x2A4C |
HID Control Point.
Definition at line 182 of file att_uuid.h.
| #define ATT_UUID_HID_EXT_REPORT_MAPPING 0x2907 |
HID External Report ID Mapping.
Definition at line 98 of file att_uuid.h.
| #define ATT_UUID_HID_INFORMATION 0x2A4A |
HID Information.
Definition at line 180 of file att_uuid.h.
| #define ATT_UUID_HID_PROTOCOL_MODE 0x2A4E |
HID Protocol Mode.
Definition at line 184 of file att_uuid.h.
| #define ATT_UUID_HID_REPORT 0x2A4D |
HID Report.
Definition at line 183 of file att_uuid.h.
| #define ATT_UUID_HID_REPORT_ID_MAPPING 0x2908 |
HID Report ID Mapping.
Definition at line 99 of file att_uuid.h.
| #define ATT_UUID_HID_REPORT_MAP 0x2A4B |
HID Report Map.
Definition at line 181 of file att_uuid.h.
| #define ATT_UUID_HID_SERVICE 0x1812 |
Human Interface Device Service.
Definition at line 62 of file att_uuid.h.
| #define ATT_UUID_HR_CP 0x2A39 |
Heart Rate Control Point.
Definition at line 163 of file att_uuid.h.
| #define ATT_UUID_HR_MEAS 0x2A37 |
Heart Rate Measurement.
Definition at line 161 of file att_uuid.h.
| #define ATT_UUID_HR_SENSOR_LOC 0x2A38 |
Body Sensor Location.
Definition at line 162 of file att_uuid.h.
| #define ATT_UUID_ILLUMINANCE_LUX 0x2731 |
illuminance lux
Definition at line 265 of file att_uuid.h.
| #define ATT_UUID_IMMEDIATE_ALERT_SERVICE 0x1802 |
Immediate Alert Service.
Definition at line 46 of file att_uuid.h.
| #define ATT_UUID_INCLUDE 0x2802 |
Include.
Definition at line 83 of file att_uuid.h.
| #define ATT_UUID_INDUCTANCE_H 0x272E |
inductance henry
Definition at line 262 of file att_uuid.h.
| #define ATT_UUID_INTERMEDIATE_BP 0x2A36 |
Intermediate Cuff Pressure.
Definition at line 160 of file att_uuid.h.
| #define ATT_UUID_INTERMEDIATE_TEMP 0x2A1E |
Intermediate Temperature.
Definition at line 136 of file att_uuid.h.
| #define ATT_UUID_IP_SUPPORT_SERVICE 0x1820 |
IP Support Service.
Definition at line 69 of file att_uuid.h.
| #define ATT_UUID_LATITUDE 0x2A2D |
Latitude.
Definition at line 151 of file att_uuid.h.
| #define ATT_UUID_LENGTH_ANGSTROM 0x2782 |
length angstrom
Definition at line 305 of file att_uuid.h.
| #define ATT_UUID_LENGTH_FOOT 0x27A3 |
length foot
Definition at line 315 of file att_uuid.h.
| #define ATT_UUID_LENGTH_IN 0x27A2 |
length inch
Definition at line 314 of file att_uuid.h.
| #define ATT_UUID_LENGTH_M 0x2701 |
length metre
Definition at line 226 of file att_uuid.h.
| #define ATT_UUID_LENGTH_MILE 0x27A4 |
length mile
Definition at line 316 of file att_uuid.h.
| #define ATT_UUID_LENGTH_NAUTICAL_MILE 0x2783 |
length nautical mile
Definition at line 306 of file att_uuid.h.
| #define ATT_UUID_LENGTH_PARSEC 0x27A1 |
length parsec
Definition at line 313 of file att_uuid.h.
| #define ATT_UUID_LENGTH_YARD 0x27A0 |
length yard
Definition at line 312 of file att_uuid.h.
| #define ATT_UUID_LINK_LOSS_SERVICE 0x1803 |
Link Loss Service.
Definition at line 47 of file att_uuid.h.
| #define ATT_UUID_LOCAL_TIME_INFO 0x2A0F |
Local Time Information.
Definition at line 121 of file att_uuid.h.
| #define ATT_UUID_LOG_RADIO_QUANT_BEL 0x2787 |
logarithmic radio quantity bel
Definition at line 310 of file att_uuid.h.
| #define ATT_UUID_LOG_RADIO_QUANT_DB 0x2788 |
logarithmic radio quantity decibel
Definition at line 311 of file att_uuid.h.
| #define ATT_UUID_LOG_RADIO_QUANT_NEPER 0x2786 |
logarithmic radio quantity neper
Definition at line 309 of file att_uuid.h.
| #define ATT_UUID_LONGITUDE 0x2A2E |
Longitude.
Definition at line 152 of file att_uuid.h.
| #define ATT_UUID_LUM_CAND_PER_SQ_M 0x271C |
luminance candela per square metre
Definition at line 245 of file att_uuid.h.
| #define ATT_UUID_LUMINOUS_FLUX_LUMEN 0x2730 |
luminous flux lumen
Definition at line 264 of file att_uuid.h.
| #define ATT_UUID_LUMINOUS_INTENSITY_CAND 0x2707 |
luminous intensity candela
Definition at line 232 of file att_uuid.h.
| #define ATT_UUID_MAG_FIELD_STR_AMP_PER_M 0x2719 |
magnetic field strength ampere per metre
Definition at line 242 of file att_uuid.h.
| #define ATT_UUID_MAGNETIC_FLEX_DENS_TESLA 0x272D |
magnetic flex density tesla
Definition at line 261 of file att_uuid.h.
| #define ATT_UUID_MAGNETIC_FLEX_WEBER 0x272C |
magnetic flex weber
Definition at line 260 of file att_uuid.h.
| #define ATT_UUID_MANUFACTURER_NAME 0x2A29 |
Manufacturer Name String.
Definition at line 147 of file att_uuid.h.
| #define ATT_UUID_MASS_CONC_KG_PER_CU_M 0x271B |
mass concentration kilogram per cubic metre
Definition at line 244 of file att_uuid.h.
| #define ATT_UUID_MASS_DENSITY_MG_PER_DL 0x27B1 |
mass density milligram per decilitre
Definition at line 329 of file att_uuid.h.
| #define ATT_UUID_MASS_DENSITY_MMOLE_PER_L 0x27B2 |
mass density millimole per litre
Definition at line 330 of file att_uuid.h.
| #define ATT_UUID_MASS_KG 0x2702 |
mass kilogram
Definition at line 227 of file att_uuid.h.
| #define ATT_UUID_MASS_TONNE 0x2768 |
mass tonne
Definition at line 302 of file att_uuid.h.
| #define ATT_UUID_MEAS_INTERVAL 0x2A21 |
Measurement Interval.
Definition at line 139 of file att_uuid.h.
| #define ATT_UUID_MESH_PROXY_DATA_IN 0x2ADD |
Mesh Proxy Data In.
Definition at line 208 of file att_uuid.h.
| #define ATT_UUID_MESH_PROXY_DATA_OUT 0x2ADE |
Mesh Proxy Data Out.
Definition at line 209 of file att_uuid.h.
| #define ATT_UUID_MESH_PROXY_SERVICE 0x1828 |
Mesh Proxy Service.
Definition at line 72 of file att_uuid.h.
| #define ATT_UUID_MESH_PRV_DATA_IN 0x2ADB |
Mesh Provisioning Data In.
Definition at line 206 of file att_uuid.h.
| #define ATT_UUID_MESH_PRV_DATA_OUT 0x2ADC |
Mesh Provisioning Data Out.
Definition at line 207 of file att_uuid.h.
| #define ATT_UUID_MESH_PRV_SERVICE 0x1827 |
Mesh Provisioning Service.
Definition at line 71 of file att_uuid.h.
| #define ATT_UUID_MODEL_NUMBER 0x2A24 |
Model Number String.
Definition at line 142 of file att_uuid.h.
| #define ATT_UUID_MOLAR_ENERGY_J_PER_MOLE 0x2751 |
molar energy joule per mole
Definition at line 287 of file att_uuid.h.
| #define ATT_UUID_MOLAR_ENTROPY_J_PER_MOLE_K 0x2752 |
molar entropy joule per mole kelvin
Definition at line 288 of file att_uuid.h.
| #define ATT_UUID_MOMENT_OF_FORCE_NEWT_M 0x2741 |
moment of force newton metre
Definition at line 271 of file att_uuid.h.
| #define ATT_UUID_NETWORK_AVAIL 0x2A3E |
Network Availability.
Definition at line 168 of file att_uuid.h.
| #define ATT_UUID_NETWORK_AVAIL_SERVICE 0x180B |
Network Availability Service.
Definition at line 55 of file att_uuid.h.
| #define ATT_UUID_NEW_ALERT 0x2A46 |
New Alert.
Definition at line 176 of file att_uuid.h.
| #define ATT_UUID_P1_SERVICE ATT_UUID_ARM_BUILD(ATT_UUID_P1_SERVICE_PART) |
Proprietary services.
Definition at line 355 of file att_uuid.h.
| #define ATT_UUID_P1_SERVICE_PART 0x1001 |
Partial proprietary service P1 UUID.
Definition at line 349 of file att_uuid.h.
| #define ATT_UUID_PER_MILLE 0x27AE |
per mille
Definition at line 326 of file att_uuid.h.
| #define ATT_UUID_PERCENTAGE 0x27AD |
percentage
Definition at line 325 of file att_uuid.h.
| #define ATT_UUID_PERIOD_BEATS_PER_MIN 0x27AF |
period beats per minute
Definition at line 327 of file att_uuid.h.
| #define ATT_UUID_PERIPH_PRIVACY_FLAG 0x2A02 |
Peripheral Privacy Flag.
Definition at line 108 of file att_uuid.h.
| #define ATT_UUID_PERMEABILITY_H_PER_M 0x2750 |
permeability henry per metre
Definition at line 286 of file att_uuid.h.
| #define ATT_UUID_PERMITTIVITY_F_PER_M 0x274F |
permittivity farad per metre
Definition at line 285 of file att_uuid.h.
| #define ATT_UUID_PHONE_ALERT_SERVICE 0x180E |
Phone Alert Status Service.
Definition at line 58 of file att_uuid.h.
| #define ATT_UUID_PLANE_ANGLE_DEG 0x2763 |
plane angle degree
Definition at line 297 of file att_uuid.h.
| #define ATT_UUID_PLANE_ANGLE_MIN 0x2764 |
plane angle minute
Definition at line 298 of file att_uuid.h.
| #define ATT_UUID_PLANE_ANGLE_R 0x2720 |
plane angle radian
Definition at line 248 of file att_uuid.h.
| #define ATT_UUID_PLANE_ANGLE_SEC 0x2765 |
plane angle second
Definition at line 299 of file att_uuid.h.
| #define ATT_UUID_PNP_ID 0x2A50 |
PnP ID.
Definition at line 186 of file att_uuid.h.
| #define ATT_UUID_POSITION_2D 0x2A2F |
Position 2D.
Definition at line 153 of file att_uuid.h.
| #define ATT_UUID_POSITION_3D 0x2A30 |
Position 3D.
Definition at line 154 of file att_uuid.h.
| #define ATT_UUID_POWER_W 0x2726 |
power watt
Definition at line 254 of file att_uuid.h.
| #define ATT_UUID_PREF_CONN_PARAM 0x2A04 |
Peripheral Preferred Connection Parameters.
Definition at line 110 of file att_uuid.h.
| #define ATT_UUID_PRESSURE_BAR 0x2780 |
pressure bar
Definition at line 303 of file att_uuid.h.
| #define ATT_UUID_PRESSURE_MM 0x2781 |
pressure millimetre of mercury
Definition at line 304 of file att_uuid.h.
| #define ATT_UUID_PRESSURE_PASCAL 0x2724 |
pressure pascal
Definition at line 252 of file att_uuid.h.
| #define ATT_UUID_PRESSURE_POUND_PER_SQ_IN 0x27A5 |
pressure pound-force per square inch
Definition at line 317 of file att_uuid.h.
| #define ATT_UUID_PRIMARY_SERVICE 0x2800 |
Primary Service.
Definition at line 81 of file att_uuid.h.
| #define ATT_UUID_PULSE_OX_CONTINUOUS 0x2A5F |
Pulse Oximeter Features.
Definition at line 194 of file att_uuid.h.
| #define ATT_UUID_PULSE_OX_FEATURES 0x2A60 |
Pulse Oximeter Features.
Definition at line 192 of file att_uuid.h.
| #define ATT_UUID_PULSE_OX_SPOT_CHECK 0x2A5E |
Pulse Oximeter Features.
Definition at line 193 of file att_uuid.h.
| #define ATT_UUID_PULSE_OXIMITER_SERVICE 0x1822 |
Pulse Oximeter Service.
Definition at line 70 of file att_uuid.h.
| #define ATT_UUID_RACP 0x2A52 |
Record Access Control Point.
Definition at line 188 of file att_uuid.h.
| #define ATT_UUID_RADIONUCLIDE_BECQUEREL 0x2732 |
activity referred to a radionuclide becquerel
Definition at line 266 of file att_uuid.h.
| #define ATT_UUID_RCE_W_PER_SQ_METER_STER 0x2756 |
radiance watt per square meter steradian
Definition at line 292 of file att_uuid.h.
| #define ATT_UUID_RECONN_ADDR 0x2A03 |
Reconnection Address.
Definition at line 109 of file att_uuid.h.
| #define ATT_UUID_REF_TIME_UPDATE_SERVICE 0x1806 |
Reference Time Update Service.
Definition at line 50 of file att_uuid.h.
| #define ATT_UUID_REFERENCE_TIME_INFO 0x2A14 |
Reference Time Information.
Definition at line 126 of file att_uuid.h.
| #define ATT_UUID_REFRACTIVE_INDEX 0x271D |
refractive index
Definition at line 246 of file att_uuid.h.
| #define ATT_UUID_RELATIVE_PERMEABILITY 0x271E |
relative permeability
Definition at line 247 of file att_uuid.h.
| #define ATT_UUID_REMOVABLE 0x2A3A |
Removable.
Definition at line 164 of file att_uuid.h.
| #define ATT_UUID_RINGER_CP 0x2A40 |
Ringer Control Point.
Definition at line 170 of file att_uuid.h.
| #define ATT_UUID_RINGER_SETTING 0x2A41 |
Ringer Setting.
Definition at line 171 of file att_uuid.h.
| #define ATT_UUID_RPAO 0x2AC9 |
Resolvable Prviate Address Only.
Definition at line 205 of file att_uuid.h.
| #define ATT_UUID_RT_INTENSITY_W_PER_STER 0x2755 |
radiant intensity watt per steradian
Definition at line 291 of file att_uuid.h.
| #define ATT_UUID_RUNNING_SPEED_FEATURE 0x2A54 |
Running Speed Feature.
Definition at line 190 of file att_uuid.h.
| #define ATT_UUID_RUNNING_SPEED_MEASUREMENT 0x2A53 |
Running Speed Measurement.
Definition at line 191 of file att_uuid.h.
| #define ATT_UUID_RUNNING_SPEED_SERVICE 0x1814 |
Running Speed Service.
Definition at line 64 of file att_uuid.h.
| #define ATT_UUID_SCAN_INT_WIND 0x2A4F |
Scan Interval Window.
Definition at line 185 of file att_uuid.h.
| #define ATT_UUID_SCAN_PARAM_SERVICE 0x1813 |
Scan Parameter Service.
Definition at line 63 of file att_uuid.h.
| #define ATT_UUID_SCI_TEMP_C 0x2A3C |
Scientific Temperature in Celsius.
Definition at line 166 of file att_uuid.h.
| #define ATT_UUID_SECONDARY_SERVICE 0x2801 |
Secondary Service.
Definition at line 82 of file att_uuid.h.
| #define ATT_UUID_SECONDARY_TIME_ZONE 0x2A10 |
Secondary Time Zone.
Definition at line 122 of file att_uuid.h.
| #define ATT_UUID_SENSOR_LOCATION 0x2A5D |
Sensor Location.
Definition at line 199 of file att_uuid.h.
| #define ATT_UUID_SERIAL_NUMBER 0x2A25 |
Serial Number String.
Definition at line 143 of file att_uuid.h.
| #define ATT_UUID_SERVER_CHAR_CONFIG 0x2903 |
Server Characteristic Configuration.
Definition at line 94 of file att_uuid.h.
| #define ATT_UUID_SERVER_SUPPORTED_FEATURES 0x2B3A |
Server Supported Features.
Definition at line 212 of file att_uuid.h.
| #define ATT_UUID_SERVICE_CHANGED 0x2A05 |
Service Changed.
Definition at line 111 of file att_uuid.h.
| #define ATT_UUID_SERVICE_REQ 0x2A3B |
Service Required.
Definition at line 165 of file att_uuid.h.
| #define ATT_UUID_SOFTWARE_REV 0x2A28 |
Software Revision String.
Definition at line 146 of file att_uuid.h.
| #define ATT_UUID_SOLID_ANGLE_STER 0x2721 |
solid angle steradian
Definition at line 249 of file att_uuid.h.
| #define ATT_UUID_SPEC_ENERGY_J_PER_KG 0x2748 |
specific energy joule per kilogram
Definition at line 278 of file att_uuid.h.
| #define ATT_UUID_SPEC_HEAT_CAP_J_PER_KG_K 0x2747 |
specific heat capacity joule per kilogram kelvin
Definition at line 277 of file att_uuid.h.
| #define ATT_UUID_SPECIFIC_VOL_CU_M_PER_KG 0x2717 |
specific volume cubic metre per kilogram
Definition at line 240 of file att_uuid.h.
| #define ATT_UUID_STRING 0x2A3D |
String.
Definition at line 167 of file att_uuid.h.
| #define ATT_UUID_SUP_NEW_ALERT_CAT 0x2A47 |
Supported New Alert Category.
Definition at line 177 of file att_uuid.h.
| #define ATT_UUID_SUP_UNREAD_ALERT_CAT 0x2A48 |
Supported Unread Alert Category.
Definition at line 178 of file att_uuid.h.
| #define ATT_UUID_SURF_CHG_DENS_C_PER_SQ_M 0x274D |
surface charge density coulomb per square metre
Definition at line 283 of file att_uuid.h.
| #define ATT_UUID_SURFACE_DENS_KG_PER_SQ_M 0x2716 |
surface density kilogram per square metre
Definition at line 239 of file att_uuid.h.
| #define ATT_UUID_SURFACE_TENSION_NEWT_PER_M 0x2742 |
surface tension newton per metre
Definition at line 272 of file att_uuid.h.
| #define ATT_UUID_SYSTEM_ID 0x2A23 |
System ID.
Definition at line 141 of file att_uuid.h.
| #define ATT_UUID_TEMP_C 0x2A1F |
Temperature Celsius.
Definition at line 137 of file att_uuid.h.
| #define ATT_UUID_TEMP_F 0x2A20 |
Temperature Fahrenheit.
Definition at line 138 of file att_uuid.h.
| #define ATT_UUID_TEMP_MEAS 0x2A1C |
Temperature Measurement.
Definition at line 134 of file att_uuid.h.
| #define ATT_UUID_TEMP_TYPE 0x2A1D |
Temperature Type.
Definition at line 135 of file att_uuid.h.
| #define ATT_UUID_THERM_TEMP_F 0x27AC |
thermodynamic temperature degree Fahrenheit
Definition at line 324 of file att_uuid.h.
| #define ATT_UUID_THERMAL_COND_W_PER_M_K 0x2749 |
thermal conductivity watt per metre kelvin
Definition at line 279 of file att_uuid.h.
| #define ATT_UUID_THERMO_TEMP_K 0x2705 |
thermodynamic temperature kelvin
Definition at line 230 of file att_uuid.h.
| #define ATT_UUID_TIME_ACCURACY 0x2A12 |
Time Accuracy.
Definition at line 124 of file att_uuid.h.
| #define ATT_UUID_TIME_BROADCAST 0x2A15 |
Time Broadcast.
Definition at line 127 of file att_uuid.h.
| #define ATT_UUID_TIME_DAY 0x2762 |
time day
Definition at line 296 of file att_uuid.h.
| #define ATT_UUID_TIME_HR 0x2761 |
time hour
Definition at line 295 of file att_uuid.h.
| #define ATT_UUID_TIME_MIN 0x2760 |
time minute
Definition at line 294 of file att_uuid.h.
| #define ATT_UUID_TIME_MONTH 0x27B4 |
time month
Definition at line 332 of file att_uuid.h.
| #define ATT_UUID_TIME_SEC 0x2703 |
time second
Definition at line 228 of file att_uuid.h.
| #define ATT_UUID_TIME_SOURCE 0x2A13 |
Time Source.
Definition at line 125 of file att_uuid.h.
| #define ATT_UUID_TIME_UPDATE_CP 0x2A16 |
Time Update Control Point.
Definition at line 128 of file att_uuid.h.
| #define ATT_UUID_TIME_UPDATE_STATE 0x2A17 |
Time Update State.
Definition at line 129 of file att_uuid.h.
| #define ATT_UUID_TIME_WITH_DST 0x2A11 |
Time with DST.
Definition at line 123 of file att_uuid.h.
| #define ATT_UUID_TIME_YEAR 0x27B3 |
time year
Definition at line 331 of file att_uuid.h.
| #define ATT_UUID_TIME_ZONE 0x2A0E |
Time Zone.
Definition at line 120 of file att_uuid.h.
| #define ATT_UUID_TX_POWER_LEVEL 0x2A07 |
Tx Power Level.
Definition at line 113 of file att_uuid.h.
| #define ATT_UUID_TX_POWER_SERVICE 0x1804 |
Tx Power Service.
Definition at line 48 of file att_uuid.h.
| #define ATT_UUID_UNITLESS 0x2700 |
unitless
Definition at line 225 of file att_uuid.h.
| #define ATT_UUID_UNREAD_ALERT_STATUS 0x2A45 |
Unread Alert Status.
Definition at line 175 of file att_uuid.h.
| #define ATT_UUID_USER_CONTROL_POINT 0x2A9F |
User Control Point.
Definition at line 204 of file att_uuid.h.
| #define ATT_UUID_USER_DATA_SERVICE 0x181C |
User Data Service.
Definition at line 67 of file att_uuid.h.
| #define ATT_UUID_USER_INDEX 0x2A9A |
User Index.
Definition at line 201 of file att_uuid.h.
| #define ATT_UUID_VALID_RANGE 0x2906 |
Valid Range.
Definition at line 97 of file att_uuid.h.
| #define ATT_UUID_VELOCITY_KNOT 0x2785 |
velocity knot
Definition at line 308 of file att_uuid.h.
| #define ATT_UUID_VELOCITY_KPH 0x27A6 |
velocity kilometre per hour
Definition at line 318 of file att_uuid.h.
| #define ATT_UUID_VELOCITY_MPH 0x27A7 |
velocity mile per hour
Definition at line 319 of file att_uuid.h.
| #define ATT_UUID_VELOCITY_MPS 0x2712 |
velocity metres per second
Definition at line 235 of file att_uuid.h.
| #define ATT_UUID_VENDOR_ID 0x2A31 |
Vendor ID.
Definition at line 155 of file att_uuid.h.
| #define ATT_UUID_VOLUME_CU_M 0x2711 |
volume cubic metres
Definition at line 234 of file att_uuid.h.
| #define ATT_UUID_VOLUME_L 0x2767 |
volume litre
Definition at line 301 of file att_uuid.h.
| #define ATT_UUID_WATCHDOG_SERVICE 0x180C |
Watchdog Service.
Definition at line 56 of file att_uuid.h.
| #define ATT_UUID_WAVENUMBER_RECIPROCAL_M 0x2714 |
wavenumber reciprocal metre
Definition at line 237 of file att_uuid.h.
| #define ATT_UUID_WEIGHT_MEAS 0x2A9D |
Weight Measurement.
Definition at line 202 of file att_uuid.h.
| #define ATT_UUID_WEIGHT_SCALE_FEATURE 0x2A9E |
Weight Scale Feature.
Definition at line 203 of file att_uuid.h.
| #define ATT_UUID_WEIGHT_SCALE_SERVICE 0x181D |
Weight Scale Service.
Definition at line 68 of file att_uuid.h.
| #define ATT_VALUE_CNF_LEN 1 |
Value confirmation length.
Definition at line 202 of file att_defs.h.
| #define ATT_VALUE_IND_LEN 3 |
Value indication length.
Definition at line 201 of file att_defs.h.
| #define ATT_VALUE_MAX_LEN 512 |
Maximum attribute value length.
Definition at line 53 of file att_defs.h.
| #define ATT_VALUE_MAX_OFFSET 511 |
Maximum attribute value offset.
Definition at line 54 of file att_defs.h.
| #define ATT_VALUE_NTF_LEN 3 |
Value notification length.
Definition at line 200 of file att_defs.h.
| #define ATT_WRITE_CMD_LEN 3 |
Write command length.
Definition at line 194 of file att_defs.h.
| #define ATT_WRITE_REQ_LEN 3 |
Write request length.
Definition at line 192 of file att_defs.h.
| #define ATT_WRITE_RSP_LEN 1 |
Write response length.
Definition at line 193 of file att_defs.h.
| #define ATTS_CSF_ALL_FEATURES (0x7) |
Mask of all client supported features.
Definition at line 336 of file att_defs.h.
| #define ATTS_CSF_EATT_BEARER (1<<1) |
Enhanced ATT Bearer.
Definition at line 333 of file att_defs.h.
| #define ATTS_CSF_MULTI_VAL_NTF (1<<2) |
Multiple Handle Value Notifications.
Definition at line 334 of file att_defs.h.
| #define ATTS_CSF_ROBUST_CACHING (1<<0) |
Robust caching.
Definition at line 332 of file att_defs.h.
| #define ATTS_SSF_EATT (1<<0) |
Enhanced ATT supported.
Definition at line 345 of file att_defs.h.
| typedef void(* attCback_t) (attEvt_t *pEvt) |
| anonymous enum |
ATT client callback events.
| enum attClientAwareStates |
client's awareness to database change.
| void AttConnRegister | ( | dmCback_t | cback | ) |
Register a connection callback with ATT. The callback is typically used to manage the attribute server database.
| cback | Client callback function. |
| uint16_t AttGetMtu | ( | dmConnId_t | connId | ) |
Get the attribute protocol MTU of a connection.
| connId | DM connection ID. |
| void* AttMsgAlloc | ( | uint16_t | len, |
| uint8_t | opcode | ||
| ) |
Allocate an ATT message buffer to be sent with the ATT attribute protocol zero-copy APIs.
| len | Message length in bytes. |
| opcode | Opcode for ATT message. |
| void AttMsgFree | ( | void * | pMsg, |
| uint8_t | opcode | ||
| ) |
Free an ATT message buffer allocated with AttMsgAlloc().
| pMsg | Pointer to message buffer. |
| opcode | Opcode for ATT message. |
| void AttRegister | ( | attCback_t | cback | ) |
Register a callback with ATT. This callback will be used for messages from both ATTC and ATTS.
| cback | Client callback function. |
| void EattEstablishChannels | ( | dmConnId_t | connId | ) |
Begin requesting EATT L2CAP coc channels.
| connId | DM connection identifier. |
| uint8_t EattGetNumChannelsInUse | ( | dmConnId_t | connId | ) |
Returns the number of open EATT channels on a given connection.
| connId | DM connection identifier. |
| void EattInit | ( | uint8_t | roleBits | ) |
Initialize the Enhanced ATT subsystem.
| const uint8_t attAcbmChUuid[2 ] |
Alert Category ID Bit Mask.
| const uint8_t attAcChUuid[2 ] |
Alert Category ID.
| const uint8_t attAggFmtUuid[2 ] |
Characteristic Aggregate Format.
| const uint8_t attAlChUuid[2 ] |
Alert Level.
| const uint8_t attAncpChUuid[2 ] |
Alert Notification Control Point.
| const uint8_t attAnsSvcUuid[2 ] |
Alert Notification Service.
| const uint8_t attApChUuid[2 ] |
Appearance.
| const uint8_t attAsChUuid[2 ] |
Alert Status.
| const uint8_t attBasSvcUuid[2 ] |
Battery Service.
| const uint8_t attBlChUuid[2 ] |
Battery Level.
| const uint8_t attBlsChUuid[2 ] |
Battery Level State.
| const uint8_t attBpfChUuid[2 ] |
Blood Pressure Feature.
| const uint8_t attBpmChUuid[2 ] |
Blood Pressure Measurement.
| const uint8_t attBpsChUuid[2 ] |
Battery Power State.
| const uint8_t attBpsSvcUuid[2 ] |
Blood Pressure Service.
| const uint8_t attBslChUuid[2 ] |
Body Sensor Location.
| const uint8_t attCarChUuid[2 ] |
Central Address Resolution.
| const uint8_t attChExtUuid[2 ] |
Characteristic Extended Properties.
| const uint8_t attChPresFmtUuid[2 ] |
Characteristic Presentation Format.
| const uint8_t attChUserDescUuid[2 ] |
Characteristic User Description.
| const uint8_t attChUuid[2 ] |
Characteristic.
| const uint8_t attCliChCfgUuid[2 ] |
Client Characteristic Configuration.
| const uint8_t attCpfChUuid[2 ] |
Cycling Power Features.
| const uint8_t attCpmChUuid[2 ] |
Cycling Power Measurement.
| const uint8_t attCsfChUuid[2 ] |
Cycling Speed Features.
| const uint8_t attCsmChUuid[2 ] |
Cycling Speed Measurement.
| const uint8_t attCtChUuid[2 ] |
Current Time.
| const uint8_t attCteEnChUuid[2 ] |
Constant Tone Extension enable.
| const uint8_t attCteIntChUuid[2 ] |
Constant Tone Extension interval.
| const uint8_t attCteMinLenChUuid[2 ] |
Constant Tone Extension minimum length.
| const uint8_t attCtePhyChUuid[2 ] |
Constant Tone Extension PHY.
| const uint8_t attCteSvcUuid[2 ] |
Constant Tone Extension service.
| const uint8_t attCteTxCntChUuid[2 ] |
Constant Tone Extension minimum transmit count.
| const uint8_t attCteTxDurChUuid[2 ] |
Constant Tone Extension transmit duration.
| const uint8_t attCtsSvcUuid[2 ] |
Current Time Service.
| const uint8_t attDbciChUuid[2 ] |
Database Change Increment.
| const uint8_t attDdtChUuid[2 ] |
Day Date Time.
| const uint8_t attDisSvcUuid[2 ] |
Device Information Service.
| const uint8_t attDnChUuid[2 ] |
Device Name.
| const uint8_t attDstoChUuid[2 ] |
DST Offset.
| const uint8_t attDtChUuid[2 ] |
Date Time.
| const uint8_t attDwChUuid[2 ] |
Day of Week.
| const uint8_t attElChUuid[2 ] |
Elevation.
| const uint8_t attEt100ChUuid[2 ] |
Exact Time 100.
| const uint8_t attEt256ChUuid[2 ] |
Exact Time 256.
| const uint8_t attFrsChUuid[2 ] |
Firmware Revision String.
| const uint8_t attGapSvcUuid[2 ] |
Generic Access Profile Service.
| const uint8_t attGattCsfChUuid[2 ] |
Client supported features.
| const uint8_t attGattDbhChUuid[2 ] |
Database hash.
| const uint8_t attGattSvcUuid[2 ] |
Generic Attribute Profile Service.
| const uint8_t attGlfChUuid[2 ] |
Glucose Feature.
| const uint8_t attGlmcChUuid[2 ] |
Glucose Measurement Context.
| const uint8_t attGlmChUuid[2 ] |
Glucose Measurement.
| const uint8_t attGlsSvcUuid[2 ] |
Glucose Service.
| const uint8_t attHidBkiChUuid[2 ] |
HID Information.
| const uint8_t attHidBkoChUuid[2 ] |
HID Information.
| const uint8_t attHidBmiChUuid[2 ] |
HID Information.
| const uint8_t attHidcpChUuid[2 ] |
HID Control Point.
| const uint8_t attHidErmUuid[2 ] |
HID External Report Reference.
| const uint8_t attHidiChUuid[2 ] |
HID Information.
| const uint8_t attHidPmChUuid[2 ] |
Protocol Mode.
| const uint8_t attHidRepChUuid[2 ] |
Report.
| const uint8_t attHidRimUuid[2 ] |
HID Report ID Mapping.
| const uint8_t attHidRmChUuid[2 ] |
Report Map.
| const uint8_t attHidSvcUuid[2 ] |
Human Interface Device Service.
| const uint8_t attHrcpChUuid[2 ] |
Heart Rate Control Point.
| const uint8_t attHrmChUuid[2 ] |
Heart Rate Measurement.
| const uint8_t attHrsChUuid[2 ] |
Hardware Revision String.
| const uint8_t attHrsSvcUuid[2 ] |
Heart Rate Service.
| const uint8_t attHtsSvcUuid[2 ] |
Health Thermometer Service.
| const uint8_t attIasSvcUuid[2 ] |
Immediate Alert Service.
| const uint8_t attIcpChUuid[2 ] |
Intermediate Cuff Pressure.
| const uint8_t attIeeeChUuid[2 ] |
IEEE 11073-20601 Regulatory Certification Data List.
| const uint8_t attIncUuid[2 ] |
Include.
| const uint8_t attItChUuid[2 ] |
Intermediate Temperature.
| const uint8_t attLatChUuid[2 ] |
Latitude.
| const uint8_t attLlsSvcUuid[2 ] |
Link Loss Service.
| const uint8_t attLongChUuid[2 ] |
Longitude.
| const uint8_t attLtiChUuid[2 ] |
Local Time Information.
| const uint8_t attMfnsChUuid[2 ] |
Manufacturer Name String.
| const uint8_t attMnsChUuid[2 ] |
Model Number String.
| const uint8_t attMprvDinChUuid[2 ] |
Mesh Provisioning Data In.
| const uint8_t attMprvDoutChUuid[2 ] |
Mesh Provisioning Data Out.
| const uint8_t attMprvSvcUuid[2 ] |
Mesh Provisioning Service.
| const uint8_t attMprxDinChUuid[2 ] |
Mesh Proxy Data In.
| const uint8_t attMprxDoutChUuid[2 ] |
Mesh Proxy Data Out.
| const uint8_t attMprxSvcUuid[2 ] |
Mesh Proxy Service.
| const uint8_t attNaChUuid[2 ] |
New Alert.
| const uint8_t attNdcsSvcUuid[2 ] |
Next DST Change Service.
| const uint8_t attNwaChUuid[2 ] |
Network Availability.
| const uint8_t attNwaSvcUuid[2 ] |
Network Availability Service.
| const uint8_t attP2dChUuid[2 ] |
Position 2D.
| const uint8_t attP3dChUuid[2 ] |
Position 3D.
| const uint8_t attPassSvcUuid[2 ] |
Phone Alert Status Service.
| const uint8_t attPlxcmChUuid[2 ] |
Pulse Oximeter Continuous Measurement.
| const uint8_t attPlxfChUuid[2 ] |
Pulse Oximeter Features.
| const uint8_t attPlxscmChUuid[2 ] |
Pulse Oximeter Spot Check Measurement.
| const uint8_t attPlxsSvcUuid[2 ] |
Pulse Oximeter Service.
| const uint8_t attPnpChUuid[2 ] |
PnP ID.
| const uint8_t attPpcpChUuid[2 ] |
Peripheral Preferred Connection Parameters.
| const uint8_t attPpfChUuid[2 ] |
Peripheral Privacy Flag.
| const uint8_t attPrimSvcUuid[2 ] |
Primary Service.
| const uint8_t attRaChUuid[2 ] |
Reconnection Address.
| const uint8_t attRacpChUuid[2 ] |
Record Access Control Point.
| const uint8_t attRcpChUuid[2 ] |
Ringer Control Point.
| const uint8_t attRemChUuid[2 ] |
Removable.
| const uint8_t attRpaoChUuid[2 ] |
Resolvable Private Address Only.
| const uint8_t attRsChUuid[2 ] |
Ringer Setting.
| const uint8_t attRsfChUuid[2 ] |
Running Speed Features.
| const uint8_t attRsmChUuid[2 ] |
Running Speed Measurement.
| const uint8_t attRtiChUuid[2 ] |
Reference Time Information.
| const uint8_t attRtusSvcUuid[2 ] |
Reference Time Update Service.
| const uint8_t attScChUuid[2 ] |
Service Changed.
| const uint8_t attSecSvcUuid[2 ] |
Secondary Service.
| const uint8_t attSidChUuid[2 ] |
System ID.
| const uint8_t attSiwChUuid[2 ] |
Scan Interval Window.
| const uint8_t attSlChUuid[2 ] |
Sensor Location.
| const uint8_t attSnacChUuid[2 ] |
Supported New Alert Category.
| const uint8_t attSnsChUuid[2 ] |
Serial Number String.
| const uint8_t attSpsSvcUuid[2 ] |
Scan Parameter Service.
| const uint8_t attSrChUuid[2 ] |
Service Required.
| const uint8_t attSrsChUuid[2 ] |
Software Revision String.
| const uint8_t attSrvChCfgUuid[2 ] |
Server Characteristic Configuration.
| const uint8_t attSsfChUuid[2 ] |
Server supported features.
| const uint8_t attStcChUuid[2 ] |
Scientific Temperature in Celsius.
| const uint8_t attStrChUuid[2 ] |
String.
| const uint8_t attStzChUuid[2 ] |
Secondary Time Zone.
| const uint8_t attSuacChUuid[2 ] |
Supported Unread Alert Category.
| const uint8_t attTaChUuid[2 ] |
Time Accuracy.
| const uint8_t attTbChUuid[2 ] |
Time Broadcast.
| const uint8_t attTcelChUuid[2 ] |
Temperature Celsius.
| const uint8_t attTdstChUuid[2 ] |
Time with DST.
| const uint8_t attTfahChUuid[2 ] |
Temperature Fahrenheit.
| const uint8_t attTmChUuid[2 ] |
Temperature Measurement.
| const uint8_t attTpsSvcUuid[2 ] |
Tx Power Service.
| const uint8_t attTsChUuid[2 ] |
Time Source.
| const uint8_t attTtChUuid[2 ] |
Temperature Type.
| const uint8_t attTucpChUuid[2 ] |
Time Update Control Point.
| const uint8_t attTusChUuid[2 ] |
Time Update State.
| const uint8_t attTxpChUuid[2 ] |
Tx Power Level.
| const uint8_t attTzChUuid[2 ] |
Time Zone.
| const uint8_t attUasChUuid[2 ] |
Unread Alert Status.
| const uint8_t attUcpChUuid[2 ] |
User Control Point.
| const uint8_t attUdsSvcUuid[2 ] |
User Data Service.
| const uint8_t attUiChUuid[2 ] |
User Index.
| const uint8_t attValRangeUuid[2 ] |
Valid Range.
| const uint8_t attVidChUuid[2 ] |
Vendor ID.
| const uint8_t attWdsSvcUuid[2 ] |
Watchdog Service.
| const uint8_t attWmChUuid[2 ] |
Weight measurement.
| const uint8_t attWsfChUuid[2 ] |
Weight scale feature.
| const uint8_t attWssSvcUuid[2 ] |
Weight scale service.
