Mbed OS Reference | emac_TestNetworkStack.h Source File

 /*
  * Copyright (c) 2018, ARM Limited, All Rights Reserved
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License"); you may
  * not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  * http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
  * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 #ifndef EMAC_TEST_NETWORK_STACK_H
 #define EMAC_TEST_NETWORK_STACK_H
 
 #include "netsocket/nsapi_types.h"
 #include "netsocket/EMAC.h"
 #include "netsocket/OnboardNetworkStack.h"
 
 #include "emac_TestMemoryManager.h"
 
 class EmacTestNetworkStack : public OnboardNetworkStack, private mbed::NonCopyable<EmacTestNetworkStack> {
 public:
 
     static EmacTestNetworkStack &get_instance();
 
     EmacTestNetworkStack();
     virtual ~EmacTestNetworkStack() {}
 
     class Interface : public OnboardNetworkStack::Interface {
     public:
 
         static Interface &get_instance();
 
         /** Connect the interface to the network
          *
          * Sets up a connection on specified network interface, using DHCP or provided network details. If the @a dhcp is set to
          * true all the remaining parameters are ignored.
          *
          * @param    dhcp       true if the network details should be acquired using DHCP
          * @param    ip         IP address to be used for the interface as "W:X:Y:Z" or NULL
          * @param    netmask    Net mask to be used for the interface as "W:X:Y:Z" or NULL
          * @param    gw         Gateway address to be used for the interface as "W:X:Y:Z" or NULL
          * @param    stack      Allow manual selection of IPv4 and/or IPv6.
          * @param    blocking   Specify whether bringup blocks for connection completion.
          * @return              NSAPI_ERROR_OK on success, or error code
          */
         virtual nsapi_error_t bringup(bool dhcp, const char *ip,
                                       const char *netmask, const char *gw,
                                       nsapi_ip_stack_t stack = DEFAULT_STACK,
                                       bool blocking = true
                                      );
 
         /** Disconnect interface from the network
          *
          * After this call the network interface is inactive, to use it again user needs to call @a mbed_ipstack_bringup again.
          *
          * @return    NSAPI_ERROR_OK on success, or error code
          */
         virtual nsapi_error_t bringdown();
 
         /** Register callback for status reporting
          *
          *  The specified status callback function will be called on status changes
          *  on the network. The parameters on the callback are the event type and
          *  event-type dependent reason parameter.
          *
          *  @param status_cb The callback for status changes
          */
         virtual void attach(mbed::Callback<void(nsapi_event_t, intptr_t)> status_cb);
 
         /** Get the connection status
          *
          *  @return         The connection status according to ConnectionStatusType
          */
         virtual nsapi_connection_status_t get_connection_status() const;
 
         /** Return MAC address of the network interface
          *
          * @return              MAC address as "V:W:X:Y:Z"
          */
         virtual char *get_mac_address(char *buf, nsapi_size_t buflen);
 
         /** Set MAC address on the network interface
          *
          *  @param          mac_addr Buffer containing the MAC address in hexadecimal format.
          *  @param          addr_len Length of provided buffer in bytes (6 or 8)
          *  @retval         NSAPI_ERROR_OK on success
          *  @retval         NSAPI_ERROR_UNSUPPORTED if this feature is not supported
          *  @retval         NSAPI_ERROR_PARAMETER if address is not valid
          *  @retval         NSAPI_ERROR_BUSY if address can't be set.
          */
         virtual nsapi_error_t set_mac_address(uint8_t *mac_addr, nsapi_size_t addr_len);
 
         /** Copies IP address of the network interface to user supplied buffer
          *
          * @param    buf        buffer to which IP address will be copied as "W:X:Y:Z"
          * @param    buflen     size of supplied buffer
          * @return              Pointer to a buffer, or NULL if the buffer is too small
          */
         virtual nsapi_error_t get_ip_address(SocketAddress *address);
 
         MBED_DEPRECATED_SINCE("mbed-os-5.15", "String-based APIs are deprecated")
         virtual char *get_ip_address(char *buf, nsapi_size_t buflen);
 
         /** Copies netmask of the network interface to user supplied buffer
          *
          * @param    buf        buffer to which netmask will be copied as "W:X:Y:Z"
          * @param    buflen     size of supplied buffer
          * @return              Pointer to a buffer, or NULL if the buffer is too small
          */
         virtual nsapi_error_t get_netmask(SocketAddress *address);
 
         MBED_DEPRECATED_SINCE("mbed-os-5.15", "String-based APIs are deprecated")
         virtual char *get_netmask(char *buf, nsapi_size_t buflen);
 
         /** Copies gateway address of the network interface to user supplied buffer
          *
          * @param    buf        buffer to which gateway address will be copied as "W:X:Y:Z"
          * @param    buflen     size of supplied buffer
          * @return              Pointer to a buffer, or NULL if the buffer is too small
          */
         virtual nsapi_error_t get_gateway(SocketAddress *address);
 
         MBED_DEPRECATED_SINCE("mbed-os-5.15", "String-based APIs are deprecated")
         virtual char *get_gateway(char *buf, nsapi_size_t buflen);
 
     private:
         friend EmacTestNetworkStack;
 
         Interface();
 
         EMAC *m_emac;
     };
 
     /** Register a network interface with the IP stack
      *
      * Connects EMAC layer with the IP stack and initializes all the required infrastructure.
      * This function should be called only once for each available interface.
      *
      * @param      emac             EMAC HAL implementation for this network interface
      * @param      default_if       true if the interface should be treated as the default one
      * @param[out] interface_out    pointer to stack interface object controlling the EMAC
      * @return                      NSAPI_ERROR_OK on success, or error code
      */
     virtual nsapi_error_t add_ethernet_interface(EMAC &emac, bool default_if, OnboardNetworkStack::Interface **interface_out, NetworkInterface *user_network_interface);
 
     /** Translates a hostname to an IP address with specific version
      *
      *  The hostname may be either a domain name or an IP address. If the
      *  hostname is an IP address, no network transactions will be performed.
      *
      *  If no stack-specific DNS resolution is provided, the hostname
      *  will be resolve using a UDP socket on the stack.
      *
      *  @param host     Hostname to resolve
      *  @param address  Destination for the host SocketAddress
      *  @param version  IP version of address to resolve, NSAPI_UNSPEC indicates
      *                  version is chosen by the stack (defaults to NSAPI_UNSPEC)
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t gethostbyname(const char *host,
                                         SocketAddress *address, nsapi_version_t version = NSAPI_UNSPEC);
 
     /** Add a domain name server to list of servers to query
      *
      *  @param address  Destination for the host address
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t add_dns_server(const SocketAddress &address);
 
 protected:
 
     /** Opens a socket
      *
      *  Creates a network socket and stores it in the specified handle.
      *  The handle must be passed to following calls on the socket.
      *
      *  A stack may have a finite number of sockets, in this case
      *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
      *
      *  @param handle   Destination for the handle to a newly created socket
      *  @param proto    Protocol of socket to open, NSAPI_TCP or NSAPI_UDP
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t socket_open(nsapi_socket_t *handle, nsapi_protocol_t proto);
 
     /** Close the socket
      *
      *  Closes any open connection and deallocates any memory associated
      *  with the socket.
      *
      *  @param handle   Socket handle
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t socket_close(nsapi_socket_t handle);
 
     /** Bind a specific address to a socket
      *
      *  Binding a socket specifies the address and port on which to receive
      *  data. If the IP address is zeroed, only the port is bound.
      *
      *  @param handle   Socket handle
      *  @param address  Local address to bind
      *  @return         0 on success, negative error code on failure.
      */
     virtual nsapi_error_t socket_bind(nsapi_socket_t handle, const SocketAddress &address);
 
     /** Listen for connections on a TCP socket
      *
      *  Marks the socket as a passive socket that can be used to accept
      *  incoming connections.
      *
      *  @param handle   Socket handle
      *  @param backlog  Number of pending connections that can be queued
      *                  simultaneously
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog);
 
     /** Connects TCP socket to a remote host
      *
      *  Initiates a connection to a remote server specified by the
      *  indicated address.
      *
      *  @param handle   Socket handle
      *  @param address  The SocketAddress of the remote host
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t socket_connect(nsapi_socket_t handle, const SocketAddress &address);
 
     /** Accepts a connection on a TCP socket
      *
      *  The server socket must be bound and set to listen for connections.
      *  On a new connection, creates a network socket and stores it in the
      *  specified handle. The handle must be passed to following calls on
      *  the socket.
      *
      *  A stack may have a finite number of sockets, in this case
      *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
      *
      *  This call is non-blocking. If accept would block,
      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
      *
      *  @param server   Socket handle to server to accept from
      *  @param handle   Destination for a handle to the newly created socket
      *  @param address  Destination for the remote address or NULL
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t socket_accept(nsapi_socket_t server,
                                         nsapi_socket_t *handle, SocketAddress *address = 0);
 
     /** Send data over a TCP socket
      *
      *  The socket must be connected to a remote host. Returns the number of
      *  bytes sent from the buffer.
      *
      *  This call is non-blocking. If send would block,
      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
      *
      *  @param handle   Socket handle
      *  @param data     Buffer of data to send to the host
      *  @param size     Size of the buffer in bytes
      *  @return         Number of sent bytes on success, negative error
      *                  code on failure
      */
     virtual nsapi_size_or_error_t socket_send(nsapi_socket_t handle,
                                               const void *data, nsapi_size_t size);
 
     /** Receive data over a TCP socket
      *
      *  The socket must be connected to a remote host. Returns the number of
      *  bytes received into the buffer.
      *
      *  This call is non-blocking. If recv would block,
      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
      *
      *  @param handle   Socket handle
      *  @param data     Destination buffer for data received from the host
      *  @param size     Size of the buffer in bytes
      *  @return         Number of received bytes on success, negative error
      *                  code on failure
      */
     virtual nsapi_size_or_error_t socket_recv(nsapi_socket_t handle,
                                               void *data, nsapi_size_t size);
 
     /** Send a packet over a UDP socket
      *
      *  Sends data to the specified address. Returns the number of bytes
      *  sent from the buffer.
      *
      *  This call is non-blocking. If sendto would block,
      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
      *
      *  @param handle   Socket handle
      *  @param address  The SocketAddress of the remote host
      *  @param data     Buffer of data to send to the host
      *  @param size     Size of the buffer in bytes
      *  @return         Number of sent bytes on success, negative error
      *                  code on failure
      */
     virtual nsapi_size_or_error_t socket_sendto(nsapi_socket_t handle, const SocketAddress &address,
                                                 const void *data, nsapi_size_t size);
 
     /** Receive a packet over a UDP socket
      *
      *  Receives data and stores the source address in address if address
      *  is not NULL. Returns the number of bytes received into the buffer.
      *
      *  This call is non-blocking. If recvfrom would block,
      *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
      *
      *  @param handle   Socket handle
      *  @param address  Destination for the source address or NULL
      *  @param buffer   Destination buffer for data received from the host
      *  @param size     Size of the buffer in bytes
      *  @return         Number of received bytes on success, negative error
      *                  code on failure
      */
     virtual nsapi_size_or_error_t socket_recvfrom(nsapi_socket_t handle, SocketAddress *address,
                                                   void *buffer, nsapi_size_t size);
 
     /** Register a callback on state change of the socket
      *
      *  The specified callback will be called on state changes such as when
      *  the socket can recv/send/accept successfully and on when an error
      *  occurs. The callback may also be called spuriously without reason.
      *
      *  The callback may be called in an interrupt context and should not
      *  perform expensive operations such as recv/send calls.
      *
      *  @param handle   Socket handle
      *  @param callback Function to call on state change
      *  @param data     Argument to pass to callback
      */
     virtual void socket_attach(nsapi_socket_t handle, void (*callback)(void *), void *data);
 
     /*  Set stack-specific socket options
      *
      *  The setsockopt allow an application to pass stack-specific hints
      *  to the underlying stack. For unsupported options,
      *  NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
      *
      *  @param handle   Socket handle
      *  @param level    Stack-specific protocol level
      *  @param optname  Stack-specific option identifier
      *  @param optval   Option value
      *  @param optlen   Length of the option value
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t setsockopt(nsapi_socket_t handle, int level,
                                      int optname, const void *optval, unsigned optlen);
 
     /*  Get stack-specific socket options
      *
      *  The getstackopt allow an application to retrieve stack-specific hints
      *  from the underlying stack. For unsupported options,
      *  NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
      *
      *  @param handle   Socket handle
      *  @param level    Stack-specific protocol level
      *  @param optname  Stack-specific option identifier
      *  @param optval   Destination for option value
      *  @param optlen   Length of the option value
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t getsockopt(nsapi_socket_t handle, int level,
                                      int optname, void *optval, unsigned *optlen);
 
 private:
 
     /** Call in callback
       *
       *  Callback is used to call the call in method of the network stack.
       */
     typedef mbed::Callback<nsapi_error_t (int delay_ms, mbed::Callback<void()> user_cb)> call_in_callback_cb_t;
 
     /** Get a call in callback
      *
      *  Get a call in callback from the network stack context.
      *
      *  Callback should not take more than 10ms to execute, otherwise it might
      *  prevent underlying thread processing. A portable user of the callback
      *  should not make calls to network operations due to stack size limitations.
      *  The callback should not perform expensive operations such as socket recv/send
      *  calls or blocking operations.
      *
      *  @return         Call in callback
      */
     virtual call_in_callback_cb_t get_call_in_callback();
 
     /** Call a callback after a delay
      *
      *  Call a callback from the network stack context after a delay. If function
      *  returns error callback will not be called.
      *
      *  @param delay    Delay in milliseconds
      *  @param func     Callback to be called
      *  @return         0 on success, negative error code on failure
      */
     virtual nsapi_error_t call_in(int delay, mbed::Callback<void()> func);
 
     Interface *m_interface;
 };
 
 #endif /* EMAC_TEST_NETWORK_STACK_H */
Important Information for this Arm website
