A digital input output bus, used for setting the state of a collection of pins. More...

#include <BusInOut.h>

Inheritance diagram for BusInOut:

Public Member Functions
	BusInOut (PinName p0, PinName p1=NC, PinName p2=NC, PinName p3=NC, PinName p4=NC, PinName p5=NC, PinName p6=NC, PinName p7=NC, PinName p8=NC, PinName p9=NC, PinName p10=NC, PinName p11=NC, PinName p12=NC, PinName p13=NC, PinName p14=NC, PinName p15=NC)
	Create a BusInOut, connected to the specified pins. More...

	BusInOut (PinName pins[16])
	Create a BusInOut, connected to the specified pins. More...

void	write (int value)
	Write the value to the output bus. More...

int	read ()
	Read the value currently output on the bus. More...

void	output ()
	Set all the pins in bus as output. More...

void	input ()
	Set all the pins in bus as an input. More...

void	mode (PinMode pull)
	Set the input pin mode for all the pins in bus. More...

int	mask ()
	Binary mask of bus pins connected to actual pins (not NC pins) If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1. More...

BusInOut &	operator= (int v)
	A shorthand for write() More...

DigitalInOut &	operator[] (int index)
	Access to particular bit in random-iterator fashion. More...

	operator int ()
	A shorthand for read() More...

Detailed Description

A digital input output bus, used for setting the state of a collection of pins.

Implemented as an array of DigitalInOut pins, the bus can be constructed by any pins without restriction other than being capable of digital input or output capabilities

Note: Synchronization level: Thread safe

Definition at line 38 of file BusInOut.h.

Constructor & Destructor Documentation

BusInOut	(	PinName	p0,
		PinName	p1 = `NC`,
		PinName	p2 = `NC`,
		PinName	p3 = `NC`,
		PinName	p4 = `NC`,
		PinName	p5 = `NC`,
		PinName	p6 = `NC`,
		PinName	p7 = `NC`,
		PinName	p8 = `NC`,
		PinName	p9 = `NC`,
		PinName	p10 = `NC`,
		PinName	p11 = `NC`,
		PinName	p12 = `NC`,
		PinName	p13 = `NC`,
		PinName	p14 = `NC`,
		PinName	p15 = `NC`
	)

Create a BusInOut, connected to the specified pins.

Parameters

p0	DigitalInOut pin to connect to bus bit
p1	DigitalInOut pin to connect to bus bit
p2	DigitalInOut pin to connect to bus bit
p3	DigitalInOut pin to connect to bus bit
p4	DigitalInOut pin to connect to bus bit
p5	DigitalInOut pin to connect to bus bit
p6	DigitalInOut pin to connect to bus bit
p7	DigitalInOut pin to connect to bus bit
p8	DigitalInOut pin to connect to bus bit
p9	DigitalInOut pin to connect to bus bit
p10	DigitalInOut pin to connect to bus bit
p11	DigitalInOut pin to connect to bus bit
p12	DigitalInOut pin to connect to bus bit
p13	DigitalInOut pin to connect to bus bit
p14	DigitalInOut pin to connect to bus bit
p15	DigitalInOut pin to connect to bus bit

Note: It is only required to specify as many pin variables as is required for the bus; the rest will default to NC (not connected)

BusInOut ( PinName pins[16] )

Create a BusInOut, connected to the specified pins.

Parameters

pins	An array of pins (PinName) to construct a BusInOut from. The maximum number of pins in the array is 16 and any pins that are unspecified or are not to be connected must be specified as NC in the array that is passed in

Member Function Documentation

void input ( )

Set all the pins in bus as an input.

int mask ( )

Binary mask of bus pins connected to actual pins (not NC pins) If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1.

Returns: Binary mask of connected pins

Definition at line 115 of file BusInOut.h.

void mode ( PinMode pull )

Set the input pin mode for all the pins in bus.

Parameters

pull	PullUp, PullDown, PullNone

operator int ( )

A shorthand for read()

See also: BusInOut::read()

BusInOut& operator= ( int v )

A shorthand for write()

See also: BusInOut::write()

DigitalInOut& operator[] ( int index )

Access to particular bit in random-iterator fashion.

Parameters

index Bit Position

void output ( )

Set all the pins in bus as output.

int read ( )

Read the value currently output on the bus.

Returns: An integer with each bit corresponding to associated DigitalInOut pin setting

void write ( int value )

Write the value to the output bus.

Parameters

value An integer specifying a bit to write for every corresponding DigitalInOut pin

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Important Information for this Arm website