Mbed OS Reference | USBMSD.h Source File

 /*
  * Copyright (c) 2018-2019, Arm Limited and affiliates.
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 #ifndef USBMSD_H
 #define USBMSD_H
 
 /* These headers are included for child class. */
 #include "USBDescriptor.h"
 #include "USBDevice_Types.h"
 #include "platform/Callback.h"
 #include "drivers/internal/PolledQueue.h"
 #include "drivers/internal/Task.h"
 #include "BlockDevice.h"
 #include "Mutex.h"
 
 #include "USBDevice.h"
 
 /**
  * \defgroup drivers_USBMSD USBMSD class
  * \ingroup drivers-public-api-usb
  * @{
  */
 
 /**
  * USBMSD class: generic class in order to use all kinds of blocks storage chip
  *
  * Introduction
  *
  * USBMSD implements the MSD protocol. It permits to access a block device (flash, SD Card,...)
  * from a computer over USB.
  *
  * @code
  * #include "mbed.h"
  * #include "SDBlockDevice.h"
  * #include "USBMSD.h"
  *
  * SDBlockDevice sd(PTE3, PTE1, PTE2, PTE4);
  * USBMSD usb(&sd);
  *
  * int main() {
  *
  *     while(true) {
  *         usb.process();
  *     }
  *
  *     return 0;
  * }
  * @endcode
  */
 class USBMSD: public USBDevice {
 public:
 
     /**
     * Constructor
     *
     * This creates a new USBMSD object with the given block device. Connect must be called
     * for the block device to connect.
     *
     * @param bd BlockDevice to mount as a USB drive
     * @param connect_blocking true to perform a blocking connect, false to start in a disconnected state
     * @param vendor_id Your vendor_id
     * @param product_id Your product_id
     * @param product_release Your preoduct_release
     */
     USBMSD(BlockDevice *bd, bool connect_blocking = true, uint16_t vendor_id = 0x0703, uint16_t product_id = 0x0104, uint16_t product_release = 0x0001);
 
     /**
     * Fully featured constructor
     *
     * Construct this object with the supplied USBPhy and parameters. The user
     * this object is responsible for calling connect() or init().
     *
     * @note Derived classes must use this constructor and call init() or
     * connect() themselves. Derived classes should also call deinit() in
     * their destructor. This ensures that no interrupts can occur when the
     * object is partially constructed or destroyed.
     *
     * @param phy USB phy to use
     * @param bd BlockDevice to mount as a USB drive
     * @param vendor_id Your vendor_id
     * @param product_id Your product_id
     * @param product_release Your preoduct_release
     */
     USBMSD(USBPhy *phy, BlockDevice *bd, uint16_t vendor_id, uint16_t product_id, uint16_t product_release);
 
     /**
      * Destroy this object
      *
      * Any classes which inherit from this class must call disconnect
      * before this destructor runs.
      */
     virtual ~USBMSD();
 
     /**
     * Connect the USB MSD device.
     *
     * @returns true if successful
     */
     bool connect();
 
     /**
     * Disconnect the USB MSD device.
     */
     void disconnect();
 
     /**
     * Perform USB processing
     */
     void process();
 
     /**
      * Called when USBMSD needs to perform processing
      *
      * @param cb Callback called when USBMSD needs process() to be called
      */
     void attach(mbed::Callback<void()> cb);
 
     /**
     * Check if MSD device was removed/unmounted on the host side.
     *
     * @returns true if device was removed/unmounted on the host side
     */
     bool media_removed();
 
 protected:
 
     /*
     * read one or more blocks on a storage chip
     *
     * @param data pointer where will be stored read data
     * @param block starting block number
     * @param count number of blocks to read
     * @returns 0 if successful
     */
     virtual int disk_read(uint8_t *data, uint64_t block, uint8_t count);
 
     /*
     * write one or more blocks on a storage chip
     *
     * @param data data to write
     * @param block starting block number
     * @param count number of blocks to write
     * @returns 0 if successful
     */
     virtual int disk_write(const uint8_t *data, uint64_t block, uint8_t count);
 
     /*
     * Disk initilization
     */
     virtual int disk_initialize();
 
     /*
     * Return the number of blocks
     *
     * @returns number of blocks
     */
     virtual uint64_t disk_sectors();
 
     /*
     * Return memory size
     *
     * @returns memory size
     */
     virtual uint64_t disk_size();
 
     /*
     * To check the status of the storage chip
     *
     * @returns status: 0: OK, 1: disk not initialized, 2: no medium in the drive, 4: write protected
     */
     virtual int disk_status();
 
 private:
 
     // MSC Bulk-only Stage
     enum Stage {
         READ_CBW,     // wait a CBW
         ERROR,        // error
         PROCESS_CBW,  // process a CBW request
         SEND_CSW,     // send a CSW
     };
 
     // Bulk-only CBW
     typedef MBED_PACKED(struct)
     {
         uint32_t Signature;
         uint32_t Tag;
         uint32_t DataLength;
         uint8_t  Flags;
         uint8_t  LUN;
         uint8_t  CBLength;
         uint8_t  CB[16];
     } CBW;
 
     // Bulk-only CSW
     typedef MBED_PACKED(struct)
     {
         uint32_t Signature;
         uint32_t Tag;
         uint32_t DataResidue;
         uint8_t  Status;
     } CSW;
 
     // If this class has been initialized
     bool _initialized;
 
     // If msd device has been unmounted by host
     volatile bool _media_removed;
 
     //state of the bulk-only state machine
     Stage _stage;
 
     // current CBW
     CBW _cbw;
 
     // CSW which will be sent
     CSW _csw;
 
     // addr where will be read or written data
     uint32_t _addr;
 
     // length of a reading or writing
     uint32_t _length;
 
     // memory OK (after a memoryVerify)
     bool _mem_ok;
 
     // cache in RAM before writing in memory. Useful also to read a block.
     uint8_t *_page;
 
     int _block_size;
     uint64_t _memory_size;
     uint64_t _block_count;
 
     // endpoints
     usb_ep_t _bulk_in;
     usb_ep_t _bulk_out;
     uint8_t _bulk_in_buf[64];
     uint8_t _bulk_out_buf[64];
     bool _out_ready;
     bool _in_ready;
     uint32_t _bulk_out_size;
 
     // Interrupt to thread deferral
     events::PolledQueue _queue;
     events::Task<void()> _in_task;
     events::Task<void()> _out_task;
     events::Task<void()> _reset_task;
     events::Task<void(const setup_packet_t *)> _control_task;
     events::Task<void()> _configure_task;
 
     BlockDevice *_bd;
     rtos::Mutex _mutex_init;
     rtos::Mutex _mutex;
 
     // space for config descriptor
     uint8_t _configuration_descriptor[32];
 
     virtual const uint8_t *string_iproduct_desc();
     virtual const uint8_t *string_iinterface_desc();
     virtual const uint8_t *configuration_desc(uint8_t index);
     virtual void callback_set_configuration(uint8_t configuration);
     virtual void callback_set_interface(uint16_t interface, uint8_t alternate);
     virtual void callback_state_change(DeviceState new_state);
     virtual void callback_request(const setup_packet_t *setup);
     virtual void callback_request_xfer_done(const setup_packet_t *setup, bool aborted);
 
     void _isr_out();
     void _isr_in();
 
     void _out();
     void _in();
     void _reset();
     void _control(const setup_packet_t *request);
     void _configure();
 
     void _init();
     void _process();
     void _write_next(uint8_t *data, uint32_t size);
     void _read_next();
 
     void CBWDecode(uint8_t *buf, uint16_t size);
     void sendCSW(void);
     bool inquiryRequest(void);
     bool write(uint8_t *buf, uint16_t size);
     bool readFormatCapacity();
     bool readCapacity(void);
     bool infoTransfer(void);
     void memoryRead(void);
     bool modeSense6(void);
     void testUnitReady(void);
     bool requestSense(void);
     void memoryVerify(uint8_t *buf, uint16_t size);
     void memoryWrite(uint8_t *buf, uint16_t size);
     void msd_reset();
     void fail();
 };
 
 /** @}*/
 
 #endif
Important Information for this Arm website
