Mistake on this page?
Report an issue in GitHub or email us
Class Hierarchy
This inheritance list is sorted roughly, but not completely, alphabetically:
[detail level 12345]
 C__ac_buffer
 C__ac_buffer_builder
 C__ac_istream
 C__ac_ostream
 C__QCBORDecodeNesting
 C__QCBORTrackNesting
 C_ARM_DRIVER_STORAGEThis is the set of operations constituting the Storage driver
 C_ARM_DRIVER_VERSIONDriver Version
 C_ARM_STORAGE_BLOCKA storage block is a range of memory with uniform attributes
 C_ARM_STORAGE_BLOCK_ATTRIBUTESAttributes of the storage range within a storage block
 C_ARM_STORAGE_CAPABILITIESStorage Driver API Capabilities
 C_ARM_STORAGE_INFOStorage information
 C_ARM_STORAGE_SECURITY_FEATURESDevice Data Security Protection Features
 C_ARM_STORAGE_STATUSOperating status of the storage controller
 C_CFG_HDR_TYPE_
 C_mbed_error_ctxMbed_error_ctx struct
 C_MEM_INFO_DESC_Memory Information
 C_MEM_REGION_
 C_MISCELLANEOUS_INFO_DESC_
 C_MISCELLANEOUS_INFO_HDR_System Miscellaneous Information
 C_QCBORDecodeContext
 C_QCBOREncodeContext
 C_QCBORItemQCBORItem holds the type, value and other info for a decoded item returned by GetNextItem()
 C_SOC_PER_INFO_DESC_
 C_SOC_PER_INFO_NUM_
 C_spi_async_event_tEvent data reported to interrupt's callback
 C_TARGET_CFG_HDR_Target Configuration Header
 C_Unity
 Caddr_table_t
 CAddress_tBLE address representation
 CAddressTypeContainer for the enumeration of BLE address types
 Cadr_req_params_tThis structure contains parameters for ADR request coming from network server
 Cadv_data_flags_tSet of advertising flags
 CGap::AdvertisementCallbackParams_tRepresentation of a scanned advertising packet
 Cadvertising_event_tProperties of an advertising event
 CAdvertisingDataBuilderBuild advertising data
 CAdvertisingDataParserParse and iterate over advertising data
 CAdvertisingDataSimpleBuilder< DataSize >Build advertising data
 CAdvertisingEndEventEvent produced when advertising ends
 CAdvertisingParametersParameters defining the advertising process
 CAdvertisingReportEventEvent generated when an advertising packet is seen during passive scanning or a scan response is received during active scanning
 CAllArgs< B0, B1, B2, B3, B4, B5 >
 CAllArgs< B0 >
 CAllArgs< B0, B1 >
 CAllArgs< B0, B1, B2 >
 CAllArgs< B0, B1, B2, B3 >
 CAllArgs< B0, B1, B2, B3, B4 >
 CAllArgs< mbed::Callback< R()> >
 CAllArgs< mbed::Callback< R(A0)>, A0 >
 CAllArgs< mbed::Callback< R(A0, A1)>, A0, A1 >
 CAnalogInAn analog input, used for reading the voltage on a pin
 CAnaloginMaps
 CAnalogOutAn analog output, used for setting the voltage on a pin
 CAnalogoutMaps
 Cargs_tFlash algo argument structure Contains all registers that should be preserved
 CAT_CellularBaseClass AT_CellularBase
 CATHandlerClass for sending AT commands and parsing AT responses
 Cattest_token_ctxThe context for creating an attestation token
 Cattribute_handle_range_tInclusive range of GATT attributes handles
 Cband_tDefault user application maximum data size for transmission
 CbaseBase class of all SafeBool instances
 Cbase_control_tPOD version of the class control_t
 CBatteryServiceBLE Battery service
 CBLEAbstract away BLE-capable radio transceivers or SOCs
 CBLEInstanceBasePrivate interface used to implement the BLE class
 CBlockDeviceA hardware device capable of writing and reading blocks
 Cboot_t
 CBounded< Rep, Min, Max >Restrict values of an integer type to a defined range
 CBounded< uint16_t, 0, 0x01F3 >
 Cbuffer_sGeneric buffer structure
 Cbyte_array_t< array_size >Model fixed size array values
 Cbyte_array_t< 6 >
 CByteBuffer
 CCallback< F >Callback class based on template specialization
 CCallback< R()>Callback class based on template specialization
 CCallback< R(A0)>Callback class based on template specialization
 CCallback< R(A0, A1)>Callback class based on template specialization
 CCallback< R(A0, A1, A2)>Callback class based on template specialization
 CCallback< R(A0, A1, A2, A3)>Callback class based on template specialization
 CCallback< R(A0, A1, A2, A3, A4)>Callback class based on template specialization
 CCallback< R(A1)>
 CCallback< uint8_t(void)>
 CCallback< void()>
 CCallback< void(AudioEvent)>
 CCallback< void(bool channel_busy)>
 CCallback< void(CIoT_Supported_Opt)>
 CCallback< void(const uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr)>
 CCallback< void(int)>
 CCallback< void(lorawan_event_t)>
 CCallback< void(mbed::BlockDevice *)>
 CCallback< void(nsapi_event_t, intptr_t)>
 CCallback< void(uint8_t current_channel)>
 CCallback< void(uint8_t, uint8_t)>
 CCallback< void(void)>
 CCAN_MessageHolder for single CAN message
 Ccase_tPOD data structure of the Case class
 Ccell_callback_data_t
 Ccell_signal_quality_t
 CCellularDeviceClass CellularDevice
 CCellularInformationClass CellularInformation
 CCellularList< T >Class CellularList
 CCellularNetworkAn abstract interface for connecting to a network and getting information from it
 CCellularSMSClass CellularSMS
 CAT_CellularStack::CellularSocket
 CCellularStateMachineCellularStateMachine class
 Ccentral_privay_configuration_tPrivacy configuration of the central role
 Cchannel_params_tDO NOT MODIFY, WILL BREAK THE API!
 Cchannel_selection_params_sThe parameter structure for the function RegionNextChannel
 CCharacteristicDescriptorDiscoveryDefinitions of events and event handlers that the characteristic descriptor discovery procedure uses
 CCircularBuffer< T, BufferSize, CounterType >Templated Circular buffer class
 CCircularBuffer< char, 256 >
 CCircularBuffer< FrameTypes, 3 >
 Cconfig_test_case_t
 CGap::ConnectionCallbackParams_tConnection events
 CConnectionCompleteEventEvent generated when a connection initiation ends (successfully or not)
 CConnectionParametersParameters defining the connection initiation process
 CConnectionParametersUpdateCompleteEventEvent received when connection parameters have been updated
 CGap::ConnectionParams_tParameters of a BLE connection
 Ccontinuous_wave_mode_params_s
 CControlPlane_netifImplements support for data transfer using Control Plane CIoT EPS optimization specified in 3GPP 23.401(4.10), 3GPP 23.682(4.5.14)
 Ccore_util_atomic_flagA lock-free, primitive atomic flag
 Ccrc_mbed_config
 CCriticalSectionLockRAII object for disabling, then restoring, interrupt state Usage:
 CCThunkBase
 Cloramac_frame_ctrl_t::ctrl_bits_s
 CDeepSleepLockRAII object for disabling, then restoring the deep sleep mode Usage:
 CDefaultFormFactorThis is a convenience class for use with the above templates
 CMessageParser::DelegateReport parsing event to the application
 CGenericRecordParser< ParserImplementation, ParsingResult >::DelegateHandle that receives parsed values
 CNFCController::DelegateThe NFCController delegate
 CNFCControllerDriver::DelegateThe NFCControllerDriver delegate
 CNFCEEPROMDriver::DelegateThe NFCEEPROMDriver delegate
 CNFCNDEFCapable::Delegate
 CNFCRemoteEndpoint::DelegateThe NFCRemoteEndpoint base delegate
 CDelegate
 CPN512TransportDriver::DelegateThe PN512TransportDriver delegate
 CDelegate
 CDelegate
 CSimpleMessageParser::DelegateDelegate invoked when the parser raise an event
 Cdevice_err_tAT response error with error code and type
 CDeviceInformationServiceBLE Device Information Service Service: https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.device_information.xml Manufacturer Name String Char: https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.manufacturer_name_string.xml
 CDigitalInA digital input, used for reading the state of a pin
 CDigitalInOutA digital input/output, used for setting or reading a bi-directional pin
 CDigitalOutA digital output, used for setting the state of a pin
 Cdirent
 CGap::DisconnectionCallbackParams_tDisconnection event
 CDisconnectionCompleteEventEvent produced when a disconnection is complete
 CDiscoveredCharacteristicRepresentation of a characteristic discovered
 CDiscoveredCharacteristicDescriptorRepresentation of a characteristic descriptor discovered
 CDiscoveredServiceRepresentation of a GATT service discovered
 CCharacteristicDescriptorDiscovery::DiscoveryCallbackParams_tCharacteristic descriptor discovered event
 CDNSBase class for DNS provider
 Cdns_application_data
 Cdr_range_tDO NOT MODIFY, WILL BREAK THE API!
 CDuration< Rep, TB, Range, Forever >Model BLE durations
 CDuration< uint16_t, 10000, Range< 0x0A, 0x0C80 > >
 CDuration< uint16_t, 1250, Range< 0x06, 0x0C80 > >
 CDuration< uint16_t, 625, Range< 0x04, 0xFFFF > >
 CDuration< uint32_t, 625, Range< 0x20, 0xFFFFFF > >
 CDynamicPinList
 Cecc_key_tStructure definition to carry pointer and size information about an Elliptic curve key which is stored in a buffer(key_buf) in raw format (without encoding):
 CEddystoneEddystone Configuration Service
 CEddystoneConfigServiceEddystone Configuration Service
 CEddystoneService
 CAdvertisingDataParser::element_tRepresentation of an Advertising Data element
 CEMACThis interface should be used to abstract low level access to networking hardware All operations receive a void * hardware pointer which an EMAC device provides when it is registered with a stack
 CEMAC_CFG_TypeEMAC configuration structure definition
 Cemac_memory
 CEMAC_PACKETBUF_TypeTX Data Buffer structure definition
 Cenable_if< B, R >
 Cenable_if< false, R >
 CEndpointResolverUtility class for resolving endpoints
 CEnvironmentalServiceBLE Environmental Service
 CUSBEndpointTester::ep_config_t
 Cequeue
 Cequeue::equeue_background
 Cequeue_event
 Cequeue::equeue_slab
 Ceth_descriptor
 CEvent< F >
 CGattClient::EventHandlerDefinition of the general handler of GattClient related events
 CGattServer::EventHandlerDefinition of the general handler of GattServer related events
 CSecurityManager::EventHandlerThe stack will use these functions to signal events to the application, subclass to override handlers
 CGap::EventHandlerDefinition of the general handler of Gap related events
 Cfactorial_data
 Cfailure_tContains the reason and location of the failure
 CFATFS
 CFATFS_DIR
 CFFOBJID
 Cdr_range_t::fields_sThe structure to store the minimum and the maximum datarate
 CFIL
 CFilePathClass FilePath
 CFILINFO
 Cfirmware_info
 Cflash_algo_tTarget flash algorithm structure
 Cflash_sTarget flash configuration For targets not supporting TrustZone, its flash_set_target_config must define target_config
 Cflash_target_config_tFlash configuration structure
 Cfsfat_kv_data_t
 Cfslittle_kv_data_t
 CFunctionCaller< PortType, FunctionType, f >
 CFunctionCaller< PortType, TF1, f >
 CFunctionCaller< PortType, TF2, f >
 CFunctionCaller< PortType, TF3, f >
 CFunctionCaller< PortType, TF4, f >
 CFunctionCaller< PortType, TF5, f >
 CGapDefine device discovery, connection and link management procedures
 CGapAdvertisingDataGAP advertising data builder
 CGapAdvertisingParamsParameters defining the advertising process
 CGapScanningParamsParameters defining the scan process
 CGap::GapState_tDescription of the states of the device
 CGattAttributeRepresentation of a GattServer attribute
 CGattCharacteristicRepresentation of a GattServer characteristic
 CGattClientDefine procedures required for interacting with a distant GATT server
 CGattHVXCallbackParamsHandle Value Notification/Indication event
 CGattReadAuthCallbackParamsGATT read authorization request event
 CGattReadCallbackParamsGATT Read event definition
 CGattServerConstruct and operates a GATT server
 CGattServerEventsAbstract events generated by a GattServer vendor port
 CGattServiceRepresentation of a GattServer service
 CGattWriteAuthCallbackParamsGATT write authorization request event
 CGattWriteCallbackParamsGATT Write event definition
 Chandlers_tA table of handlers
 CHandleTestCommandHandleTestCommand turns all the typed-in/serial commands into function calls sent via a eventqueue to the driver shim/wrapper class
 CHarnessTest Harness
 Cloramac_mhdr_t::hdr_bits_s
 CHeaderSet of constants of a record header
 CHealthThermometerServiceBLE Health Thermometer Service
 CHeartRateServiceBLE Heart Rate Service
 CHeartRateService::HeartRateValueBytes
 CHID_REPORT
 Ci2c_tAsynch I2C HAL structure
 CI2CMaps
 CI2CSlaveAn I2C Slave, used for communicating with an I2C Master device
 CIEEE754_union
 CinfoThe key size
 CKVStore::infoHolds key information
 CBLE::InitializationCompleteCallbackContextInitialization complete event
 COnboardNetworkStack::InterfaceRepresentation of a stack's view of an interface
 Ciovec_args_tHolds the iovec parameters that are passed to a service
 Cipc_consumer_queue_t
 Cipc_producer_queue_t
 Cis_convertible< From, To >
 Cis_type< M, M >
 Cis_unsigned< T >
 Cis_unsigned< unsigned char >
 Cis_unsigned< unsigned int >
 Cis_unsigned< unsigned long >
 Cis_unsigned< unsigned long long >
 Cis_unsigned< unsigned short >
 Citems_to_get_t
 Ckv_map_entry_tThis structure maps between a string name and a partition configuration
 CKVStoreKVStore class
 Ckvstore_config_tThis structure represent a KVStore partition configuration
 CL3IPThis interface should be used to abstract low level access to networking hardware All operations receive a void * hardware pointer which an l3ip device provides when it is registered with a stack
 Clfs
 Clfs_cache
 Clfs_config
 Clfs_dir
 Clfs_dir::lfs_disk_dir
 Clfs_entry::lfs_disk_entry
 Clfs_superblock::lfs_disk_superblock
 Clfs_emubd
 Clfs_entryLittlefs data structures ///
 Clfs_file
 Clfs_file_config
 Clfs_free
 Clfs_info
 Clfs_superblock
 Clink_adr_params_sStructure containing data for local ADR settings
 CLinkedListBase
 CLinkEntry
 CLinkLossServiceThis service defines behavior when a link is lost between two devices
 CLockGuardRAII mutex locker
 Clora_channelplanDO NOT MODIFY, WILL BREAK THE API!
 Clora_channels_sDO NOT MODIFY, WILL BREAK THE API!
 Clora_mac_system_params_t
 CLoRaMacLoRaMac Class Implementation of LoRaWAN MAC layer
 Cloramac_frame_ctrl_t
 Cloramac_keys
 Cloramac_mcps_confirm_t
 Cloramac_mcps_indication_t
 Cloramac_mhdr_t
 Cloramac_mlme_confirm_t
 Cloramac_mlme_indication_t
 Cloramac_protocol_params
 Cloramac_rx_message_tLoramac_rx_message_t
 Cloramac_tx_message_tStack level TX message structure
 CLoRaMacChannelPlan
 CLoRaMacCommandLoRaMacCommand Class Helper class for LoRaMac layer to handle any MAC commands
 CLoRaMacCrypto
 Cloraphy_channels_t
 Cloraphy_params_t
 Cloraphy_table_t
 CLoRaRadioInterface for the radios, containing the main functions that a radio needs, and five callback functions
 Clorawan_app_callbacks_tStack level callback functions
 Clorawan_connectLorawan_connect_t structure
 Clorawan_connect_abp_tThe lorawan_connect_abp structure
 Clorawan_connect_otaa_tThe lorawan_connect_otaa structure
 Clorawan_rx_metadataMeta-data collection for the received packet
 Clorawan_sessionLoRaWAN session
 Clorawan_timers
 Clorawan_tx_metadataMeta-data collection for a transmission
 CLoRaWANInterfaceLoRaWANInterface Class A network interface for LoRaWAN
 CLoRaWANTimeHandler/ _____) _ | | ( (____ _____ ____ _| |_ _____ ____| |__ ____ | ___ | (_ _) ___ |/ ___) _ \ _____) ) ____| | | || |_| ____( (___| | | | (______/|_____)_|_|_| __)_____)____)_| |_| (C)2013 Semtech
 CLowPowerTickerWrapper
 Cmaclib_buf_t
 Cmaclib_func_t
 Cmaclib_import_func_t
 Cmaclib_msg_tStructures
 Cmbed_fault_context_t
 Cmbed_stats_cpu_tStruct mbed_stats_cpu_t definition
 Cmbed_stats_heap_tStruct mbed_stats_heap_t definition
 Cmbed_stats_socket_tStructure to parse socket statistics
 Cmbed_stats_stack_tStruct mbed_stats_stack_t definition
 Cmbed_stats_sys_tStruct mbed_stats_sys_t definition
 Cmbed_stats_thread_tStruct mbed_stats_thread_t definition
 CMbedCRC< polynomial, width >CRC object provides CRC generation through hardware or software
 CMbedTesterThe base class for controlling the FPGA CI Test Shield
 Cmem_region
 CMessageBuilderConstruct a NDEF Message
 CMessageParserEvent driven NDEF Message parser
 CMIDIMessageA MIDI message container
 CMimeRepresent a mime object
 Cmlme_cw_tx_mode_t
 Cmlme_join_req_t
 Cmulticast_params_s
 CNanostackLockGuardRAII style Nanostack mutex acquisition
 CNanostackPhyPHY driver class for Nanostack
 CNetStackMemoryManager
 Cnfc_rf_protocols_bitmask_t
 CNFCControllerDriverThe abstraction for a NFC controller driver
 CNFCEEPROMDriverThe abstraction for a NFC EEPROM driver
 CNFCNDEFCapableThe base class for all endpoints that can support NDEF content
 CNFCRemoteEndpointThis is the base class for all remote endpoints (initiators and targets) addressable over the air interface
 CNFCTestShimTest app driver wrapper
 Cnil
 CNonCopyable< T >Prevents generation of copy constructor and copy assignment operator in derived classes
 CNonCopyable< ATCmdParser >
 CNonCopyable< BusIn >
 CNonCopyable< BusInOut >
 CNonCopyable< BusOut >
 CNonCopyable< CallChain >
 CNonCopyable< CAN >
 CNonCopyable< ConditionVariable >
 CNonCopyable< DeviceKey >
 CNonCopyable< DirHandle >
 CNonCopyable< EmacTestNetworkStack >
 CNonCopyable< Ethernet >
 CNonCopyable< EventFlags >
 CNonCopyable< EventQueue >
 CNonCopyable< FileBase >
 CNonCopyable< FileHandle >
 CNonCopyable< FileLike >
 CNonCopyable< FileSystemHandle >
 CNonCopyable< FileSystemLike >
 CNonCopyable< FlashIAP >
 CNonCopyable< I2C >
 CNonCopyable< InterruptIn >
 CNonCopyable< InterruptManager >
 CNonCopyable< KVMap >
 CNonCopyable< LoRaPHY >
 CNonCopyable< LoRaWANStack >
 CNonCopyable< LowPowerTicker >
 CNonCopyable< LowPowerTimeout >
 CNonCopyable< LowPowerTimer >
 CNonCopyable< Mail< T, queue_sz > >
 CNonCopyable< MemoryPool< T, pool_sz > >
 CNonCopyable< MeshInterfaceNanostack >
 CNonCopyable< Mutex >
 CNonCopyable< Nanostack >
 CNonCopyable< Nanostack::Interface >
 CNonCopyable< NanostackEthernetInterface >
 CNonCopyable< NVStore >
 CNonCopyable< PlatformMutex >
 CNonCopyable< QSPI >
 CNonCopyable< Queue< T, queue_sz > >
 CNonCopyable< RawSerial >
 CNonCopyable< RtosTimer >
 CNonCopyable< ScopedLock< Lockable > >
 CNonCopyable< ScopedRamExecutionLock >
 CNonCopyable< ScopedRomWriteLock >
 CNonCopyable< Semaphore >
 CNonCopyable< Serial >
 CNonCopyable< SerialBase >
 CNonCopyable< SPI >
 CNonCopyable< SPISlave >
 CNonCopyable< Stream >
 CNonCopyable< Thread >
 CNonCopyable< Ticker >
 CNonCopyable< Timeout >
 CNonCopyable< TimerEvent >
 CNonCopyable< UARTSerial >
 CNonCopyable< Watchdog >
 Cnsapi_addrIP address structure for passing IP addresses by value
 Cnsapi_ip_mreqNsapi_ip_mreq structure
 Cnsapi_stackNsapi_stack structure
 Cnsapi_stack_apiNsapi_stack_api structure
 Cnsapi_wifi_apNsapi_wifi_ap structure
 Cnvmem_param_t
 CBLE::OnEventsToProcessCallbackContextEvents to process event
 COperationListBase
 CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, _ >
 CAllArgs< B0 >::Operations< T, _ >
 CAllArgs< B0, B1, B2 >::Operations< T, _ >
 CAllArgs< B0, B1, B2, B3 >::Operations< T, _ >
 CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, _ >
 CAllArgs< B0, B1 >::Operations< T, _ >
 CAllArgs< B0, B1 >::Operations< T *, R(U::*)()>
 CAllArgs< B0, B1, B2 >::Operations< T *, R(U::*)(B2)>
 CAllArgs< B0, B1, B2, B3 >::Operations< T *, R(U::*)(B2, B3)>
 CAllArgs< B0, B1, B2, B3, B4 >::Operations< T *, R(U::*)(B2, B3, B4)>
 CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T *, R(U::*)(B2, B3, B4, B5)>
 CAllArgs< B0, B1 >::Operations< T, R(U::*)() const >
 CAllArgs< B0, B1 >::Operations< T, R(U::*)() const volatile >
 CAllArgs< B0, B1 >::Operations< T, R(U::*)() volatile >
 CAllArgs< B0, B1, B2 >::Operations< T, R(U::*)(B2) const >
 CAllArgs< B0, B1, B2 >::Operations< T, R(U::*)(B2) const volatile >
 CAllArgs< B0, B1, B2 >::Operations< T, R(U::*)(B2) volatile >
 CAllArgs< B0, B1, B2, B3 >::Operations< T, R(U::*)(B2, B3) const >
 CAllArgs< B0, B1, B2, B3 >::Operations< T, R(U::*)(B2, B3) const volatile >
 CAllArgs< B0, B1, B2, B3 >::Operations< T, R(U::*)(B2, B3) volatile >
 CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, R(U::*)(B2, B3, B4) const >
 CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, R(U::*)(B2, B3, B4) const volatile >
 CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, R(U::*)(B2, B3, B4) volatile >
 CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, R(U::*)(B2, B3, B4, B5) const >
 CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, R(U::*)(B2, B3, B4, B5) const volatile >
 CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, R(U::*)(B2, B3, B4, B5) volatile >
 CCellularNetwork::operator_names_tCellular operator names in numeric and alpha format
 CCellularNetwork::operator_t3GPP TS 27.007 - 7.3 PLMN selection +COPS
 CEddystoneConfigService::Params_t
 CURIBeaconConfigService::Params_t
 CPasskeyAsciiPasskey stored as a string of digits
 CMessageBuilder::PayloadBuilderBuild a record payload
 CCellularContext::pdpcontext_params_tPDP Context information
 CPeriodicAdvertisingReportEventEvent generated when periodic advertising packet is received
 CPeriodicAdvertisingSyncEstablishedEventEvent generated when you first receive a periodic advertisement
 CPeriodicAdvertisingSyncLossEvent generated when periodic advertising sync is lost
 Cperipheral_privacy_configuration_tPrivacy Configuration of the peripheral role
 CScanParameters::phy_configuration_tScan configuration of a physical channel
 Cphy_set_tType that describe a set of PHY(sical) transports
 CPinList
 CPinMap
 CPN512TransportDriverThe PN512 supports multiple transport mechanisms (SPI, I2C, UART): this class provides a unified API across these transports
 Cpollfd
 Cpollfh
 CPort< N, PinMapType, FormFactorType, FunctionType >
 CPortInA multiple pin digital input
 CPortInOutA multiple pin digital in/out used to set/read multiple bi-directional pins
 CPortOutA multiple pin digital output
 CGattCharacteristic::PresentationFormat_tValue of a Characteristic Presentation Format descriptor
 CDiscoveredCharacteristic::Properties_tProperties of a discovered characteristic
 Cpsa_api_t
 Cpsa_cipher_operation_s
 Cpsa_crypto_derivation_ipc_sPsa_crypto_derivation_ipc_s struct used for some of the PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together
 Cpsa_crypto_generator_s
 Cpsa_crypto_ipc_aead_s
 Cpsa_crypto_ipc_asymmetric_sPsa_crypto_ipc_asymmetric_s struct used for asymmetric PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together
 Cpsa_crypto_ipc_sPsa_crypto_ipc_s struct used for some of the PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together
 Cpsa_handle_item_t
 Cpsa_handle_manager_t
 Cpsa_hash_operation_s
 Cpsa_invecStructure that describes a scatter-gather input buffer
 Cpsa_key_mng_ipc_sPsa_key_mng_ipc_s struct used for some of the PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together
 Cpsa_key_policy_s
 Cpsa_mac_operation_s
 Cpsa_msgStructure containing the PSA IPC message sent from a client partition to an RoT Service
 Cpsa_msg_tDescribe a message received by an RoT Service after calling psa_get()
 Cpsa_outvecStructure which describes a scatter-gather output buffer
 Cpsa_storage_info_tA container for metadata associated with a specific uid
 Cpsa_storage_version_t
 CPWMMaps
 CPwmOutA pulse-width modulation digital output
 CQCBORStringAllocatorThis is a set of functions and pointer context (in object-oriented parlance, an "object") used to allocate memory for coalescing the segments of an indefinite length string into one
 CQCBORTagListInThis is used to tell the decoder about tags that it should record in uTagBits in QCBORItem beyond the built-in tags
 CQCBORTagListOutThis is for QCBORDecode_GetNextWithTags() to be able to return the full list of tags on an item
 CQspi
 Cqspi_commandQSPI command
 CQspiCommand
 CQUECTEL_BG96
 Cradio_eventsReporting functions for upper layers
 Cradio_fsk_packet_handlerFSK packet handle
 Cradio_fsk_settingsFSK modem parameters
 Cradio_lora_packet_handlerLoRa packet Contains information about a LoRa packet
 Cradio_lora_settingsLoRa modem parameters
 Cradio_settingsGlobal radio settings
 Crda5981_apsta_info
 Crda5981_scan_result
 Crda5991h_user_data
 Crda_enetdata_t
 Crda_msg
 CRecordRepresent a record
 CRecordParserParse a record
 CRecordParserChainRecord parser chain
 CRecordTypeEncode a record type
 CCellularNetwork::registration_params_tNetwork registration information
 Crf_ctrlsStructure to hold RF controls for LoRa Radio
 Crx2_channel_params
 Crx_config_params_t
 CRX_DescRX Descriptor structure type definition
 Crx_message_uLora_mac_rx_message_by_type_t union
 Crx_param_setup_req_sContains rx parameter setup request coming from network server
 CRX_StatRX Status structure type definition
 CSafeEnum< Target, LayoutType >Helper class used to define safe enumerations
 CSafeEnum< adv_data_appearance_t, uint16_t >
 CSafeEnum< adv_data_type_t, uint8_t >
 CSafeEnum< advertising_data_status_t, uint8_t >
 CSafeEnum< advertising_filter_policy_t, uint8_t >
 CSafeEnum< advertising_type_t, uint8_t >
 CSafeEnum< att_security_requirement_t, uint8_t >
 CSafeEnum< clock_accuracy_t, uint8_t >
 CSafeEnum< coded_symbol_per_bit_t, uint8_t >
 CSafeEnum< connection_role_t, uint8_t >
 CSafeEnum< controller_supported_features_t, uint8_t >
 CSafeEnum< disconnection_reason_t, uint8_t >
 CSafeEnum< duplicates_filter_t, uint8_t >
 CSafeEnum< initiator_filter_policy_t, uint8_t >
 CSafeEnum< io_capability_t, uint8_t >
 CSafeEnum< link_encryption_t, uint8_t >
 CSafeEnum< local_disconnection_reason_t, uint8_t >
 CSafeEnum< own_address_type_t, uint8_t >
 CSafeEnum< pairing_failure_t, uint8_t >
 CSafeEnum< peer_address_type_t, uint8_t >
 CSafeEnum< phy_t, uint8_t >
 CSafeEnum< random_address_type_t, uint8_t >
 CSafeEnum< scanning_filter_policy_t, uint8_t >
 CSafeEnum< target_peer_address_type_t, uint8_t >
 CScanParametersParameters defining the scan process
 CScanRequestEventEvent produced when a peer requests a scan response from the advertiser
 CScanTimeoutEventEvent generated when scan times out
 Csector_info_tSector information structure
 CSecurityManagerOverview
 Cserial_tAsynch serial HAL structure
 CServiceDiscoveryHost callback types needed by the service discovery procedure
 CUSBDevice::setup_packet_t
 Cshared_data_tlv_entryShared data TLV entry header format
 Cshared_data_tlv_headerShared data TLV header
 CSharedPtr< T >Shared pointer class
 CSharedPtr< mbed::nfc::NFCRemoteInitiator >
 CSingletonPtr< T >Utility class for creating an using a singleton
 CSingletonPtr< PlatformMutex >
 CSmartPosterSmart poster object
 CSocketSocket interface
 CSocketAddressSocketAddress class
 CSocketStatsSocketStats class
 CSpan< ElementType, Extent >Nonowning view to a sequence of contiguous elements
 CSpan< const uint8_t >
 CSpan< ElementType, SPAN_DYNAMIC_EXTENT >Span specialization that handle dynamic size
 CSpan< uint8_t >
 CSpecificationTest specification containing the setup and teardown handlers and test cases
 Cspi_capabilities_tDescribes the capabilities of a SPI peripherals
 CSPIMaps
 CSPINoCSMaps
 CSPISlaveMaps
 Cspm_active_msg
 Cspm_channel_linked_list
 Cspm_db
 Cspm_iovec
 Cspm_ipc_channel
 Cspm_partition
 Cspm_partition_db_t
 Cspm_partition_desc_tHolds the fields that define a partition for SPM
 Cspm_partition_runtime_data_tRuntime context information of a partition
 Cspm_partition_static_data_tHolds the fields of the partition DB used by the SPM code
 Cspm_rot_service
 Cstat
 CStaticInterface< Impl, Interface >Static Interface helper class
 Cstatvfs
 CSynchronizedIntegral< T >Thread safe wrapper for integral types
 Ct_cose_crypto_hashThe context for use with the hash adaptation layer here
 Ct_cose_sign1_ctxThis is the context for creating a COSE_Sign1 structure
 CTask< F >
 CTask< void()>
 CTask< void(const setup_packet_t *)>
 CTaskQueueTaskQueue
 CCharacteristicDescriptorDiscovery::TerminationCallbackParams_tCharacteristic descriptor discovery ended event
 Ctest_config_t
 Ctest_count_t
 Ctest_data
 Ctest_info_t
 Ctest_status_buffer_t
 CTextRepresent the well known type text
 Ctfm_boot_dataStore the data for the runtime SW
 Ctfm_conn_handle_t
 Ctfm_event_t
 Ctfm_exc_stack_t
 Ctfm_list_node_t
 Ctfm_msg_body_t
 Ctfm_msg_queue_t
 Ctfm_pool_chunk_t
 Ctfm_pool_instance_t
 Ctfm_sfn_req_s
 Ctfm_spm_ipc_partition_t
 Ctfm_spm_service_db_t
 Ctfm_spm_service_t
 Ctfm_state_context
 Ctfm_state_context_base
 Ctfm_state_context_ext
 Ctfm_thrd_ctx
 Cticker_data_tTicker's data structure
 Cticker_event_queue_tTicker's event queue structure
 Cticker_event_sTicker's event structure
 Cticker_info_tInformation about the ticker implementation
 Cticker_interface_tTicker's interface structure - required API for a ticker
 CTimeoutDriftTester< TimeoutTesterType >
 CTimeoutType
 CTimer
 Ctimer_event_tTimer object description
 Ctimeval
 Ctrans_thread_params_t
 CTransaction< Class >Transaction class defines a transaction
 Ctransaction_tTransaction structure
 Ctx_config_params_tTX configuration parameters
 CTX_DescTX Descriptor structure type definition
 CTX_StatTX Status structure type definition
 CUARTMaps
 CUARTNoFCMaps
 CUARTServiceBLE Service to enable UART over BLE
 CUpdateConnectionParametersRequestEventEvent received when a peer wants to change the connection parameters
 CURIModel the well known type URI
 CURIBeaconConfigServiceUriBeacon Configuration Service
 Cusb_ep_entry_t
 Cusb_ep_table_t
 CUSBPhyAbstract interface to physical USB hardware
 CUSBPhyEventsEvent handler for USBPhy
 Cuseful_bufThe non-const UsefulBuf typically used for some allocated memory that is to be filled in
 Cuseful_buf_cUsefulBufC and UsefulBuf are simple data structures to hold a pointer and length for a binary data
 Cuseful_input_buf
 Cuseful_out_bufUsefulOutBuf is a structure and functions (an object) that are good for serializing data into a buffer such as is often done with network protocols or data written to files
 Cutest_v1_scheduler_tThe scheduler interface consists out of the post and cancel functions, which you must implement to use utest
 CUUIDRepresentation of a Universally Unique Identifier (UUID)
 Cval_api_t
 Cval_test_info_t
 Cverify_adr_params_sStructure used to store ADR values received from network for verification (legality) purposes
 Cwatchdog_config_tWatchdog configuration
 Cwatchdog_features_tWatchdog features
 Cwd_param_t
 CGap::Whitelist_tRepresentation of a whitelist of addresses
 CWiFiAccessPointWiFiAccessPoint class
 Cwland_ap_data_tThis struct contains ap data, include ssid key and channel
 Cwland_ap_net_data_tThis struct contains ap net data
 Cwland_dhcp_t
 Cwland_phy_channels_t
 Cwland_phy_t
 Cwland_rf_channels_t
 Cwland_rf_t
 Cwland_sta_data_tThis struct contains all smartconfig mbed flash parameter
 Cwland_tx_power_tThis struct contains tx power parameter
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.