Mistake on this page?
Report an issue in GitHub or email us

Wi-Fi

Wi-Fi driver

This document describes how to port and test an IEEE 802.11 Wi-Fi driver to Mbed OS. There are two types of Wi-Fi drivers in Mbed OS, depending on which protocol layer it implements. Wi-Fi drivers are either a special case of Ethernet driver or external IP stacks. Wi-Fi drivers require configuration from an application and, therefore, implement both the low-level EMAC API or network stack API and the high-level controlling interface API called WiFiInterface.

WifiInterface

The WifiInterface class is the controlling API from application to driver. You can use this API for configuring security settings, network names and keys and also instantiating connection or disconnection phases from the network.

MyWiFiInterface wifi;

nsapi_error_t error = wifi.set_credentials("ssid", "password", NSAPI_SECURITY_WPA_WPA2);
if (error != NSAPI_ERROR_OK) {
    // Failed to set credentials
    ...
}

error = wifi.connect();
if (error != NSAPI_ERROR_OK) {
    // Failed to connect
    ...
}

Whether the driver is an AT-command driven external IP stack or an Ethernet device, this is the API to implement.

The driver takes care of the network joining process and presents Mbed OS only Ethernet layer interface, or IP stack. The driver and the device itself do all of the security handshakes.

For description of different driver layer, please read the IP networking technology section of this book.

EMAC driver

If the device is implementing Ethernet MAC, the driver provides the EMAC interface for Mbed OS. In this case, please refer to the Ethernet MAC (EMAC) drivers porting guide first.

External IP stack

If the device is an eternal IP stack, for example an AT-command driven module, it needs to implement the full NetworkStack API. Please refer to the networkStack porting guide for implementation details.

Assumptions

Defined behavior

  • The driver either provides the EMAC interface for the network stack, or implements the full NetworkStack API.
  • All functions in the Socket API are working as specified in API.
  • The device can pass IPv4 and IPv6 packets.
  • The device can handle IP packets sized 1500 bytes (MTU is 1500).

Undefined behavior

  • IP payloads larger than 1500 bytes may be fragmented but not guaranteed to work.

Testing

For testing the WifiInterface implementation and network joining, we provide a set of Greentea tests in the Mbed OS tree under TESTS/network/wifi.

For testing the Ethernet MAC interface, please refer to the Ethernet MAC (EMAC) drivers porting guide. For external IP stacks, these tests do not apply.

To test the stability of the driver or NetworkStack implementation, we provide a set of socket layer tests in the TESTS/netsocket tree. Please see the Network Socket test plan for instructions on how to run Mbed OS socket tests.

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.