Modules
	Analogin hal functions
	Defined behaviour

	Analogout hal functions
	Defined behaviour

	Hardware CRC
	The Hardware CRC HAL API provides a low-level interface to the Hardware CRC module of a target platform.

	Critical Section HAL functions

	Flash HAL API

	GPIO HAL functions
	Defined behavior

	GPIO IRQ HAL functions
	Defined behavior

	I2C Events Macros

	I2C Configuration Functions
	Defined behavior

	Synchronous I2C Hardware Abstraction Layer for slave

	Asynchronous I2C Hardware Abstraction Layer

	Instrumented Trace Macrocell HAL API

	Low Power Ticker
	Low level interface to the low power ticker of a target.

	MPU hal
	The MPU hal provides a simple MPU API to enhance device security by preventing execution from ram.

	Port HAL functions

	Pwmout hal functions
	Defined behavior

	QSPI HAL

	ResetReason HAL API
	Low-level interface to the ResetReason of a target.

	RTC hal
	The RTC hal provides a low level interface to the Real Time Counter (RTC) of a target.

	Serial TX Events Macros

	Serial RX Events Macros

	Serial Configuration Functions
	Defined behavior

	Asynchronous Serial Hardware Abstraction Layer

	sleep hal requirements
	Low level interface to the sleep mode of a target.

	SPI Configuration Functions
	Defined behavior

	Synchronous SPI Hardware Abstraction Layer

	Asynchronous SPI Hardware Abstraction Layer

	Ticker HAL functions

	TRNG hal functions

	Microsecond Ticker
	Low level interface to the microsecond ticker of a target.

	Watchdog HAL API
	Low-level interface to the Independent Watchdog Timer of a target.

Data Structures
struct	buffer_s
	Generic buffer structure. More...

struct	can_pinmap_t

struct	CAN_Message
	Holder for single CAN message. More...

struct	crc_mbed_config

struct	i2c_t
	Asynch I2C HAL structure. More...

struct	i2c_pinmap_t

class	LowPowerTickerWrapper

struct	PinMap

struct	PinList

struct	PeripheralList

struct	serial_t
	Asynch serial HAL structure. More...

struct	serial_pinmap_t

struct	serial_fc_pinmap_t

struct	spi_t
	Asynch SPI HAL structure. More...

struct	spi_pinmap_t

struct	spi_capabilities_t
	Describes the capabilities of a SPI peripherals. More...

struct	ticker_event_s
	Ticker's event structure. More...

struct	ticker_info_t
	Information about the ticker implementation. More...

struct	ticker_interface_t
	Ticker's interface structure - required API for a ticker. More...

struct	ticker_event_queue_t
	Ticker's event queue structure. More...

struct	ticker_data_t
	Ticker's data structure. More...

Typedefs
typedef struct analogin_s	analogin_t
	Analogin hal structure. More...

typedef struct dac_s	dac_t
	Analogout hal structure. More...

typedef struct buffer_s	buffer_t
	Generic buffer structure. More...

typedef enum crc_polynomial	crc_polynomial_t
	CRC Polynomial value. More...

typedef struct gpio_irq_s	gpio_irq_t
	GPIO IRQ HAL structure. More...

typedef struct port_s	port_t
	Port HAL structure. More...

typedef struct pwmout_s	pwmout_t
	Pwmout hal structure. More...

typedef uint32_t	timestamp_t
	Legacy format representing a timestamp in us. More...

typedef uint64_t	us_timestamp_t
	A us timestamp stored in a 64 bit integer. More...

typedef struct ticker_event_s	ticker_event_t
	Ticker's event structure. More...

typedef struct trng_s	trng_t
	TRNG HAL structure. More...

Enumerations

Functions
const PinMap *	can_rd_pinmap (void)
	Get the pins that support CAN RD. More...

const PinMap *	can_td_pinmap (void)
	Get the pins that support CAN TD. More...

void	lp_ticker_wrapper_irq_handler (ticker_irq_handler_type handler)
	Interrupt handler for the wrapped lp ticker. More...

const ticker_data_t *	get_lp_ticker_wrapper_data (const ticker_data_t *data)
	Get wrapped lp ticker data. More...

void	lp_ticker_wrapper_suspend (void)
	Suspend the wrapper layer code. More...

void	lp_ticker_wrapper_resume (void)
	Resume the wrapper layer code. More...

bool	pinmap_find_peripheral_pins (const PinList whitelist, const PinList blacklist, int per, const PinMap const maps, PinName **pins, uint32_t count)
	Find a combination of pins suitable for use given the constraints. More...

bool	pinmap_list_has_pin (const PinList *list, PinName pin)
	Check if the pin is in the list. More...

bool	pinmap_list_has_peripheral (const PeripheralList *list, int peripheral)
	Check if the peripheral is in the list. More...

const PinList *	pinmap_restricted_pins (void)
	Get the pin list of pins to avoid during testing. More...

const PeripheralList *	pinmap_uart_restricted_peripherals (void)
	Get the pin list of peripherals per interface to avoid during testing. More...

const PinList *	pinmap_gpio_restricted_pins (void)
	Get the pin list of pins to avoid during GPIO/GPIO_IRQ testing. More...

USBPhy *	get_usb_phy ()
	Return a the USBPhy instance for this hardware. More...

Detailed Description

Typedef Documentation

typedef struct analogin_s analogin_t

Analogin hal structure.

analogin_s is declared in the target's hal

Definition at line 34 of file analogin_api.h.

typedef struct buffer_s buffer_t

Generic buffer structure.

typedef enum crc_polynomial crc_polynomial_t

CRC Polynomial value.

Different polynomial values supported

typedef struct dac_s dac_t

Analogout hal structure.

dac_s is declared in the target's hal

Definition at line 34 of file analogout_api.h.

typedef struct gpio_irq_s gpio_irq_t

GPIO IRQ HAL structure.

gpio_irq_s is declared in the target's HAL

Definition at line 42 of file gpio_irq_api.h.

typedef struct port_s port_t

Port HAL structure.

port_s is declared in the target's HAL

Definition at line 33 of file port_api.h.

typedef struct pwmout_s pwmout_t

Pwmout hal structure.

pwmout_s is declared in the target's hal

Definition at line 34 of file pwmout_api.h.

typedef struct ticker_event_s ticker_event_t

Ticker's event structure.

typedef uint32_t timestamp_t

Legacy format representing a timestamp in us.

Given it is modeled as a 32 bit integer, this type can represent timestamp up to 4294 seconds (71 minutes). Prefer using us_timestamp_t which store timestamp as 64 bits integer.

Definition at line 33 of file ticker_api.h.

typedef struct trng_s trng_t

TRNG HAL structure.

trng_s is declared in the target's HAL

Definition at line 30 of file trng_api.h.

typedef uint64_t us_timestamp_t

A us timestamp stored in a 64 bit integer.

Can store timestamp up to 584810 years.

Definition at line 39 of file ticker_api.h.

Enumeration Type Documentation

enum CANFormat

Values that represent CAN Format.

Definition at line 35 of file can_helper.h.

enum CANType

Values that represent CAN Type.

Definition at line 48 of file can_helper.h.

enum crc_polynomial

CRC Polynomial value.

Different polynomial values supported

Enumerator
POLY_7BIT_SD	x7+x3+1
POLY_8BIT_CCITT	x8+x2+x+1
POLY_16BIT_CCITT	x16+x12+x5+1
POLY_16BIT_IBM	x16+x15+x2+1
POLY_32BIT_ANSI	x32+x26+x23+x22+x16+x12+x11+x10+x8+x7+x5+x4+x2+x+1

Definition at line 30 of file crc_api.h.

enum gpio_irq_event

GPIO IRQ events.

Definition at line 34 of file gpio_irq_api.h.

enum SerialIrq

Serial interrupt sources.

Enumerator
RxIrq	Receive Data Register Full.
TxIrq	Transmit Data Register Empty.

Definition at line 75 of file serial_api.h.

Function Documentation

const PinMap* can_rd_pinmap ( void )

Get the pins that support CAN RD.

Return a PinMap array of pins that support CAN RD. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* can_td_pinmap ( void )

Get the pins that support CAN TD.

Return a PinMap array of pins that support CAN TD. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const ticker_data_t* get_lp_ticker_wrapper_data ( const ticker_data_t * data )

Get wrapped lp ticker data.

Parameters

data	hardware low power ticker object

Returns: wrapped low power ticker object

USBPhy* get_usb_phy ( )

Return a the USBPhy instance for this hardware.

For details on adding support for a USBPhy see the specification in USBPhy.h.

Returns: A pointer to a USBPhy instance

Note: Calling this function on platforms without a USBPhy will result in an error

void lp_ticker_wrapper_irq_handler ( ticker_irq_handler_type handler )

Interrupt handler for the wrapped lp ticker.

Parameters

handler the function which would normally be called by the lp ticker handler when it is not wrapped

void lp_ticker_wrapper_resume ( void )

Resume the wrapper layer code.

Resume operation of the wrapper layer. Interrupts will be filtered as normal and the microsecond timer will be used for interrupts scheduled too quickly back-to-back.

void lp_ticker_wrapper_suspend ( void )

Suspend the wrapper layer code.

Pass through all interrupts to the low power ticker and stop using the microsecond ticker.

Warning: : Make sure to suspend the LP ticker first (call ticker_suspend()), otherwise the behavior is undefined.

bool pinmap_find_peripheral_pins	(	const PinList *	whitelist,
		const PinList *	blacklist,
		int	per,
		const PinMap const	maps,
		PinName **	pins,
		uint32_t	count
	)

Find a combination of pins suitable for use given the constraints.

This function finds pins which meet these specific properties:

The pin is part of the form factor
The pin is not in the restricted list
The pin is contained within the respective pinmap
The pin belongs to the given peripheral
Each pin found is distinct; in the example below mosi and miso will never be assigned the same pin

Example:

 #include "mbed.h"
 #include "pinmap.h"
 
 int main()
 {
     int per = spi_master_cs_pinmap()->peripheral;
     const PinList *pins_ff = pinmap_ff_default_pins();
     const PinList *pins_avoid = pinmap_restricted_pins();
     PinName mosi = NC;
     PinName miso = NC;
     PinName sclk = NC;
     PinName ssel = NC;
     const PinMap *maps[] = {
         spi_master_mosi_pinmap(),
         spi_master_miso_pinmap(),
         spi_master_clk_pinmap(),
         spi_master_cs_pinmap()
     };
     PinName *pins[] = {
         &mosi,
         &miso,
         &sclk,
         &ssel
     };
     if (pinmap_find_peripheral_pins(pins_ff, pins_avoid, per, maps, pins, sizeof(maps) / sizeof(maps[0]))) {
         printf("Found SPI pins to test instance %i with:\n"
                "  mosi=%s\n"
                "  miso=%s\n"
                "  sclk=%s\n"
                "  ssel=%s\n", per,
                pinmap_ff_default_pin_to_string(mosi),
                pinmap_ff_default_pin_to_string(miso),
                pinmap_ff_default_pin_to_string(sclk),
                pinmap_ff_default_pin_to_string(ssel));
     } else {
         printf("Could not find SPI combination to test %i\n", per);
     }
     return 0;
 }

Parameters

whitelist	List of pins to choose from
blacklist	List of pins which cannot be used
per	Peripheral to which the pins belong
maps	An array of pin maps to select from
pins	An array of pins to find. Pins already set to a value will be left unchanged. Only pins initialized to NC will be updated by this function
count	The size of maps and pins

Returns: true if a suitable combination of pins was found and written to the pins array, otherwise false

const PinList* pinmap_gpio_restricted_pins ( void )

Get the pin list of pins to avoid during GPIO/GPIO_IRQ testing.

The GPIO restricted pin list is used to indicate to testing that a pin should be skipped due to some caveat about it.

Targets should override the weak implementation of this function if they have peripherals which should be skipped during testing.

Note: This is special case only for GPIO/GPIO_IRQ tests because targets do not provide pin-maps for GPIO.

Returns: Pointer to a peripheral list of peripheral to avoid

bool pinmap_list_has_peripheral	(	const PeripheralList *	list,
		int	peripheral
	)

Check if the peripheral is in the list.

Parameters

list	peripheral list to check
peripheral	peripheral to check for in the list

Returns: true if the peripheral is in the list, false otherwise

bool pinmap_list_has_pin	(	const PinList *	list,
		PinName	pin
	)

Check if the pin is in the list.

Parameters

list	pin list to check
pin	pin to check for in the list

Returns: true if the pin is in the list, false otherwise

const PinList* pinmap_restricted_pins ( void )

Get the pin list of pins to avoid during testing.

The restricted pin list is used to indicate to testing that a pin should be skipped due to some caveat about it. For example, using CONSOLE_RX and CONSOLE_TX during tests will interfere with the test runner and should be avoided.

Targets should override the weak implementation of this function if they have additional pins which should be skipped during testing.

Returns: Pointer to a pin list of pins to avoid

const PeripheralList* pinmap_uart_restricted_peripherals ( void )

Get the pin list of peripherals per interface to avoid during testing.

The restricted peripheral list is used to indicate to testing that a peripheral should be skipped due to some caveat about it. For example, using the USB serial port during tests will interfere with the test runner and should be avoided.

Targets should override the weak implementation of this function if they have peripherals which should be skipped during testing.

Note: Restricting peripheral is at the moment available for UART interface only as only STDIO UART must be skipped because it is used by Mbed. Restricting peripherals for other interfaces should be added in the future if required.

Returns: Pointer to a peripheral list of peripheral to avoid

Modules

Defined behaviour

Defined behaviour

Defined behavior

Defined behavior

Defined behavior

Defined behavior

Defined behavior

Defined behavior

Data Structures

Typedefs

Enumerations

Functions

Detailed Description

Typedef Documentation

Enumeration Type Documentation

Function Documentation

Important Information for this Arm website