Functions
int	spi_master_write (spi_t *obj, int value)
	Write a byte out in master mode and receive a value. More...

int	spi_master_block_write (spi_t obj, const char tx_buffer, int tx_length, char *rx_buffer, int rx_length, char write_fill)
	Write a block out in master mode and receive a value. More...

int	spi_slave_receive (spi_t *obj)
	Check if a value is available to read. More...

int	spi_slave_read (spi_t *obj)
	Get a received value out of the SPI receive buffer in slave mode. More...

void	spi_slave_write (spi_t *obj, int value)
	Write a value to the SPI peripheral in slave mode. More...

int	spi_busy (spi_t *obj)
	Checks if the specified SPI peripheral is in use. More...

uint8_t	spi_get_module (spi_t *obj)
	Get the module number. More...

const PinMap *	spi_master_mosi_pinmap (void)
	Get the pins that support SPI MOSI. More...

const PinMap *	spi_master_miso_pinmap (void)
	Get the pins that support SPI MISO. More...

const PinMap *	spi_master_clk_pinmap (void)
	Get the pins that support SPI CLK. More...

const PinMap *	spi_master_cs_pinmap (void)
	Get the pins that support SPI CS. More...

const PinMap *	spi_slave_mosi_pinmap (void)
	Get the pins that support SPI MOSI. More...

const PinMap *	spi_slave_miso_pinmap (void)
	Get the pins that support SPI MISO. More...

const PinMap *	spi_slave_clk_pinmap (void)
	Get the pins that support SPI CLK. More...

const PinMap *	spi_slave_cs_pinmap (void)
	Get the pins that support SPI CS. More...

Detailed Description

Function Documentation

int spi_busy ( spi_t * obj )

Checks if the specified SPI peripheral is in use.

Parameters

[in] obj The SPI peripheral to check

Returns: non-zero if the peripheral is currently transmitting

uint8_t spi_get_module ( spi_t * obj )

Get the module number.

Parameters

[in] obj The SPI peripheral to check

Returns: The module number

int spi_master_block_write	(	spi_t *	obj,
		const char *	tx_buffer,
		int	tx_length,
		char *	rx_buffer,
		int	rx_length,
		char	write_fill
	)

Write a block out in master mode and receive a value.

The total number of bytes sent and received will be the maximum of tx_length and rx_length. The bytes written will be padded with the value 0xff.

Parameters

[in]	obj	The SPI peripheral to use for sending
[in]	tx_buffer	Pointer to the byte-array of data to write to the device
[in]	tx_length	Number of bytes to write, may be zero
[in]	rx_buffer	Pointer to the byte-array of data to read from the device
[in]	rx_length	Number of bytes to read, may be zero
[in]	write_fill	Default data transmitted while performing a read

Returns: The number of bytes written and read from the device. This is maximum of tx_length and rx_length.

const PinMap* spi_master_clk_pinmap ( void )

Get the pins that support SPI CLK.

Return a PinMap array of pins that support SPI CLK in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* spi_master_cs_pinmap ( void )

Get the pins that support SPI CS.

Return a PinMap array of pins that support SPI CS in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* spi_master_miso_pinmap ( void )

Get the pins that support SPI MISO.

Return a PinMap array of pins that support SPI MISO in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* spi_master_mosi_pinmap ( void )

Get the pins that support SPI MOSI.

Return a PinMap array of pins that support SPI MOSI in master mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

int spi_master_write	(	spi_t *	obj,
		int	value
	)

Write a byte out in master mode and receive a value.

Parameters

[in]	obj	The SPI peripheral to use for sending
[in]	value	The value to send

Returns: Returns the value received during send

const PinMap* spi_slave_clk_pinmap ( void )

Get the pins that support SPI CLK.

Return a PinMap array of pins that support SPI CLK in slave mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* spi_slave_cs_pinmap ( void )

Get the pins that support SPI CS.

Return a PinMap array of pins that support SPI CS in slave mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* spi_slave_miso_pinmap ( void )

Get the pins that support SPI MISO.

Return a PinMap array of pins that support SPI MISO in slave mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

const PinMap* spi_slave_mosi_pinmap ( void )

Get the pins that support SPI MOSI.

Return a PinMap array of pins that support SPI MOSI in slave mode. The array is terminated with {NC, NC, 0}.

Returns: PinMap array

int spi_slave_read ( spi_t * obj )

Get a received value out of the SPI receive buffer in slave mode.

Blocks until a value is available

Parameters

[in] obj The SPI peripheral to read

Returns: The value received

int spi_slave_receive ( spi_t * obj )

Check if a value is available to read.

Parameters

[in] obj The SPI peripheral to check

Returns: non-zero if a value is available

void spi_slave_write	(	spi_t *	obj,
		int	value
	)

Write a value to the SPI peripheral in slave mode.

Blocks until the SPI peripheral can be written to

Parameters

[in]	obj	The SPI peripheral to write
[in]	value	The value to write

Functions

Detailed Description

Function Documentation

Important Information for this Arm website