Mistake on this page?
Report an issue in GitHub or email us
Public Member Functions
I2C Class Reference

An I2C Master, used for communicating with I2C slave devices. More...

#include <I2C.h>

Inheritance diagram for I2C:
NonCopyable< I2C >

Public Member Functions

 I2C (PinName sda, PinName scl)
 Create an I2C Master interface, connected to the specified pins. More...
 
void frequency (int hz)
 Set the frequency of the I2C interface. More...
 
int read (int address, char *data, int length, bool repeated=false)
 Read from an I2C slave. More...
 
int read (int ack)
 Read a single byte from the I2C bus. More...
 
int write (int address, const char *data, int length, bool repeated=false)
 Write to an I2C slave. More...
 
int write (int data)
 Write single byte out on the I2C bus. More...
 
void start (void)
 Creates a start condition on the I2C bus. More...
 
void stop (void)
 Creates a stop condition on the I2C bus. More...
 
virtual void lock (void)
 Acquire exclusive access to this I2C bus. More...
 
virtual void unlock (void)
 Release exclusive access to this I2C bus. More...
 
int transfer (int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t &callback, int event=I2C_EVENT_TRANSFER_COMPLETE, bool repeated=false)
 Start nonblocking I2C transfer. More...
 
void abort_transfer ()
 Abort the ongoing I2C transfer. More...
 

Detailed Description

An I2C Master, used for communicating with I2C slave devices.

Note
Synchronization level: Thread safe

Example:

Read temperature from LM75BD
#include "mbed.h"
I2C i2c(I2C_SDA , I2C_SCL);
const int addr7bit = 0x48; // 7-bit I2C address
const int addr8bit = 0x48 << 1; // 8-bit I2C address, 0x90
int main() {
char cmd[2];
while (1) {
cmd[0] = 0x01;
cmd[1] = 0x00;
// read and write takes the 8-bit version of the address.
// set up configuration register (at 0x01)
i2c.write(addr8bit, cmd, 2);
wait(0.5);
// read temperature register
cmd[0] = 0x00;
i2c.write(addr8bit, cmd, 1);
i2c.read( addr8bit, cmd, 2);
float tmp = (float((cmd[0]<<8)|cmd[1]) / 256.0);
printf("Temp = %.2f\n", tmp);
}
}

Definition at line 75 of file I2C.h.

Constructor & Destructor Documentation

I2C ( PinName  sda,
PinName  scl 
)

Create an I2C Master interface, connected to the specified pins.

Parameters
sdaI2C data line pin
sclI2C clock line pin

Member Function Documentation

void abort_transfer ( )

Abort the ongoing I2C transfer.

void frequency ( int  hz)

Set the frequency of the I2C interface.

Parameters
hzThe bus frequency in hertz
virtual void lock ( void  )
virtual

Acquire exclusive access to this I2C bus.

int read ( int  address,
char *  data,
int  length,
bool  repeated = false 
)

Read from an I2C slave.

Performs a complete read transaction. The bottom bit of the address is forced to 1 to indicate a read.

Parameters
address8-bit I2C slave address [ addr | 1 ]
dataPointer to the byte-array to read data in to
lengthNumber of bytes to read
repeatedRepeated start, true - don't send stop at end default value is false.
Returns
0 on success (ack), nonzero on failure (nack)
int read ( int  ack)

Read a single byte from the I2C bus.

Parameters
ackindicates if the byte is to be acknowledged (1 = acknowledge)
Returns
the byte read
void start ( void  )

Creates a start condition on the I2C bus.

void stop ( void  )

Creates a stop condition on the I2C bus.

int transfer ( int  address,
const char *  tx_buffer,
int  tx_length,
char *  rx_buffer,
int  rx_length,
const event_callback_t callback,
int  event = I2C_EVENT_TRANSFER_COMPLETE,
bool  repeated = false 
)

Start nonblocking I2C transfer.

This function locks the deep sleep until any event has occurred

Parameters
address8/10 bit I2C slave address
tx_bufferThe TX buffer with data to be transferred
tx_lengthThe length of TX buffer in bytes
rx_bufferThe RX buffer, which is used for received data
rx_lengthThe length of RX buffer in bytes
eventThe logical OR of events to modify
callbackThe event callback function
repeatedRepeated start, true - do not send stop at end default value is false.
Returns
Zero if the transfer has started, or -1 if I2C peripheral is busy
virtual void unlock ( void  )
virtual

Release exclusive access to this I2C bus.

int write ( int  address,
const char *  data,
int  length,
bool  repeated = false 
)

Write to an I2C slave.

Performs a complete write transaction. The bottom bit of the address is forced to 0 to indicate a write.

Parameters
address8-bit I2C slave address [ addr | 0 ]
dataPointer to the byte-array data to send
lengthNumber of bytes to send
repeatedRepeated start, true - do not send stop at end default value is false.
Returns
0 on success (ack), nonzero on failure (nack)
int write ( int  data)

Write single byte out on the I2C bus.

Parameters
datadata to write out on bus
Returns
'0' - NAK was received '1' - ACK was received, '2' - timeout
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.