The type of the state data structure for multipart hash operations.

Before calling any function on a hash operation object, the application must initialize it by any of the following means:

• Set the structure to all-bits-zero, for example:
  1 psa_hash_operation_t operation;

  2 memset(&operation, 0, sizeof(operation));
• Initialize the structure to logical zero values, for example:
  1 psa_hash_operation_t operation = {0};
• Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT, for example:
  1 psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
• Assign the result of the function psa_hash_operation_init() to the structure, for example:
  1 psa_hash_operation_t operation;

  2 operation = psa_hash_operation_init();

This is an implementation-defined struct. Applications should not make any assumptions about the content of this structure except as directed by the documentation of a specific implementation.

Definition at line 882 of file TARGET_TFM/TARGET_TFM_LATEST/include/psa/crypto.h.

The type of the state data structure for multipart hash operations.

Before calling any function on a hash operation object, the application must initialize it by any of the following means:

• Set the structure to all-bits-zero, for example:
  1 psa_hash_operation_t operation;

  2 memset(&operation, 0, sizeof(operation));
• Initialize the structure to logical zero values, for example:
  1 psa_hash_operation_t operation = {0};
• Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT, for example:
  1 psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
• Assign the result of the function psa_hash_operation_init() to the structure, for example:
  1 psa_hash_operation_t operation;

  2 operation = psa_hash_operation_init();

This is an implementation-defined struct. Applications should not make any assumptions about the content of this structure except as directed by the documentation of a specific implementation.

Definition at line 955 of file TARGET_TFM/TARGET_TFM_V1_0/include/psa/crypto.h.

The type of the state data structure for multipart hash operations.

Before calling any function on a hash operation object, the application must initialize it by any of the following means:

• Set the structure to all-bits-zero, for example:
  1 psa_hash_operation_t operation;

  2 memset(&operation, 0, sizeof(operation));
• Initialize the structure to logical zero values, for example:
  1 psa_hash_operation_t operation = {0};
• Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT, for example:
  1 psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
• Assign the result of the function psa_hash_operation_init() to the structure, for example:
  1 psa_hash_operation_t operation;

  2 operation = psa_hash_operation_init();

This is an implementation-defined struct. Applications should not make any assumptions about the content of this structure except as directed by the documentation of a specific implementation.

Definition at line 966 of file TARGET_MBED_PSA_SRV/inc/psa/crypto.h.

Abort a hash operation.

Aborting an operation frees all associated resources except for the operation structure itself. Once aborted, the operation object can be reused for another operation by calling psa_hash_setup() again.

You may call this function any time after the operation object has been initialized by one of the methods described in psa_hash_operation_t.

In particular, calling psa_hash_abort() after the operation has been terminated by a call to psa_hash_abort(), psa_hash_finish() or psa_hash_verify() is safe and has no effect.

Parameters

[in,out]

operation

Initialized hash operation.

Return values

PSA_SUCCESS
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Clone a hash operation.

This function copies the state of an ongoing hash operation to a new operation object. In other words, this function is equivalent to calling psa_hash_setup() on target_operation with the same algorithm that source_operation was set up for, then psa_hash_update() on target_operation with the same input that that was passed to source_operation. After this function returns, the two objects are independent, i.e. subsequent calls involving one of the objects do not affect the other object.

Parameters

[in]	source_operation	The active hash operation to clone.
[in,out]	target_operation	The operation object to set up. It must be initialized but not active.

Return values

PSA_SUCCESS
PSA_ERROR_BAD_STATE	The source_operation state is not valid (it must be active).
PSA_ERROR_BAD_STATE	The target_operation state is not valid (it must be inactive).
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Calculate the hash (digest) of a message and compare it with a reference value.

Parameters

	alg	The hash algorithm to compute (PSA_ALG_XXX value such that PSA_ALG_IS_HASH(alg) is true).
[in]	input	Buffer containing the message to hash.
	input_length	Size of the input buffer in bytes.
[out]	hash	Buffer containing the expected hash value.
	hash_length	Size of the hash buffer in bytes.

Return values

PSA_SUCCESS	The expected hash is identical to the actual hash of the input.
PSA_ERROR_INVALID_SIGNATURE	The hash of the message was calculated successfully, but it differs from the expected hash.
PSA_ERROR_NOT_SUPPORTED	alg is not supported or is not a hash algorithm.
PSA_ERROR_INVALID_ARGUMENT	input_length or hash_length do not match the hash size for alg
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Calculate the hash (digest) of a message.

Note

To verify the hash of a message against an expected value, use psa_hash_compare() instead.

Parameters

	alg	The hash algorithm to compute (PSA_ALG_XXX value such that PSA_ALG_IS_HASH(alg) is true).
[in]	input	Buffer containing the message to hash.
	input_length	Size of the input buffer in bytes.
[out]	hash	Buffer where the hash is to be written.
	hash_size	Size of the hash buffer in bytes.
[out]	hash_length	On success, the number of bytes that make up the hash value. This is always #PSA_HASH_SIZE(alg).

Return values

PSA_SUCCESS	Success.
PSA_ERROR_NOT_SUPPORTED	alg is not supported or is not a hash algorithm.
PSA_ERROR_INVALID_ARGUMENT
PSA_ERROR_BUFFER_TOO_SMALL	hash_size is too small
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Finish the calculation of the hash of a message.

The application must call psa_hash_setup() before calling this function. This function calculates the hash of the message formed by concatenating the inputs passed to preceding calls to psa_hash_update().

When this function returns successfuly, the operation becomes inactive. If this function returns an error status, the operation enters an error state and must be aborted by calling psa_hash_abort().

Warning

Applications should not call this function if they expect a specific value for the hash. Call psa_hash_verify() instead. Beware that comparing integrity or authenticity data such as hash values with a function such as memcmp is risky because the time taken by the comparison may leak information about the hashed data which could allow an attacker to guess a valid hash and thereby bypass security controls.

Parameters

[in,out]	operation	Active hash operation.
[out]	hash	Buffer where the hash is to be written.
	hash_size	Size of the hash buffer in bytes.
[out]	hash_length	On success, the number of bytes that make up the hash value. This is always #PSA_HASH_SIZE(alg) where alg is the hash algorithm that is calculated.

Return values

PSA_SUCCESS	Success.
PSA_ERROR_BAD_STATE	The operation state is not valid (it must be active).
PSA_ERROR_BUFFER_TOO_SMALL	The size of the hash buffer is too small. You can determine a sufficient buffer size by calling #PSA_HASH_SIZE(alg) where alg is the hash algorithm that is calculated.
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Return an initial value for a hash operation object.

Set up a multipart hash operation.

The sequence of operations to calculate a hash (message digest) is as follows:

1. Allocate an operation object which will be passed to all the functions listed here.
2. Initialize the operation object with one of the methods described in the documentation for psa_hash_operation_t, e.g. #PSA_HASH_OPERATION_INIT.
3. Call psa_hash_setup() to specify the algorithm.
4. Call psa_hash_update() zero, one or more times, passing a fragment of the message each time. The hash that is calculated is the hash of the concatenation of these messages in order.
5. To calculate the hash, call psa_hash_finish(). To compare the hash with an expected value, call psa_hash_verify().

If an error occurs at any step after a call to psa_hash_setup(), the operation will need to be reset by a call to psa_hash_abort(). The application may call psa_hash_abort() at any time after the operation has been initialized.

After a successful call to psa_hash_setup(), the application must eventually terminate the operation. The following events terminate an operation:

• A successful call to psa_hash_finish() or psa_hash_verify().
• A call to psa_hash_abort().

Parameters

[in,out]	operation	The operation object to set up. It must have been initialized as per the documentation for psa_hash_operation_t and not yet in use.
	alg	The hash algorithm to compute (PSA_ALG_XXX value such that PSA_ALG_IS_HASH(alg) is true).

Return values

PSA_SUCCESS	Success.
PSA_ERROR_NOT_SUPPORTED	alg is not a supported hash algorithm.
PSA_ERROR_INVALID_ARGUMENT	alg is not a hash algorithm.
PSA_ERROR_BAD_STATE	The operation state is not valid (it must be inactive).
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Add a message fragment to a multipart hash operation.

The application must call psa_hash_setup() before calling this function.

If this function returns an error status, the operation enters an error state and must be aborted by calling psa_hash_abort().

Parameters

[in,out]	operation	Active hash operation.
[in]	input	Buffer containing the message fragment to hash.
	input_length	Size of the input buffer in bytes.

Return values

PSA_SUCCESS	Success.
PSA_ERROR_BAD_STATE	The operation state is not valid (it muct be active).
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.

Finish the calculation of the hash of a message and compare it with an expected value.

The application must call psa_hash_setup() before calling this function. This function calculates the hash of the message formed by concatenating the inputs passed to preceding calls to psa_hash_update(). It then compares the calculated hash with the expected hash passed as a parameter to this function.

When this function returns successfuly, the operation becomes inactive. If this function returns an error status, the operation enters an error state and must be aborted by calling psa_hash_abort().

Note

Implementations shall make the best effort to ensure that the comparison between the actual hash and the expected hash is performed in constant time.

Parameters

[in,out]	operation	Active hash operation.
[in]	hash	Buffer containing the expected hash value.
	hash_length	Size of the hash buffer in bytes.

Return values

PSA_SUCCESS	The expected hash is identical to the actual hash of the message.
PSA_ERROR_INVALID_SIGNATURE	The hash of the message was calculated successfully, but it differs from the expected hash.
PSA_ERROR_BAD_STATE	The operation state is not valid (it must be active).
PSA_ERROR_INSUFFICIENT_MEMORY
PSA_ERROR_COMMUNICATION_FAILURE
PSA_ERROR_HARDWARE_FAILURE
PSA_ERROR_CORRUPTION_DETECTED
PSA_ERROR_BAD_STATE	The library has not been previously initialized by psa_crypto_init(). It is implementation-dependent whether a failure to initialize results in this error code.