An ethernet interface, to use with the ethernet pins. More...

#include <Ethernet.h>

Inheritance diagram for Ethernet:

Public Member Functions
	Ethernet ()

virtual	~Ethernet ()

int	write (const char *data, int size)

int	send ()

int	receive ()

int	read (char *data, int size)

void	address (char *mac)

int	link ()

void	set_link (Mode mode)

Detailed Description

An ethernet interface, to use with the ethernet pins.

Deprecated:: EthInterface is now the preferred way to get an Ethernet object. Alternatively, use NetworkInterface to get an instance of an appropriate network interface (WiFi or Ethernet).

Note: Synchronization level: Not protected

Example:

// Read destination and source from every ethernet packet
#include "mbed.h"
Ethernet eth;
int main() {
    char buf[0x600];
    while(1) {
        int size = eth.receive();
        if(size > 0) {
            eth.read(buf, size);
            printf("Destination:  %02X:%02X:%02X:%02X:%02X:%02X\n",
                    buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
            printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
                    buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
        }
        wait(1);
    }
}

Definition at line 70 of file Ethernet.h.

Constructor & Destructor Documentation

Ethernet ( )

Deprecated:: Initialize the ethernet interface.

virtual ~Ethernet ( )

virtual

Deprecated:: Powers the hardware down.

Member Function Documentation

void address ( char * mac )

Deprecated:: Gives the ethernet address of the mbed.

Parameters

mac	Must be a pointer to a 6 byte char array to copy the ethernet address in.

int link ( )

Deprecated:: Returns if an ethernet link is present or not.

It takes a while after Ethernet initialization to show up.

Returns: 0 if no ethernet link is present, 1 if an ethernet link is present.

Example:

// Using the Ethernet link function
#include "mbed.h"
Ethernet eth;
int main() {
    wait(1); // Needed after startup.
    if (eth.link()) {
         printf("online\n");
    } else {
         printf("offline\n");
    }
}

int read	(	char *	data,
		int	size
	)

Deprecated:: Read from an received ethernet packet.

After receive returned a number bigger than 0 it is possible to read bytes from this packet.

Parameters

data	Pointer to data packet
size	Size of data to be read.

Returns: The number of byte read.

Note: It is possible to use read multiple times. Each time read will start reading after the last read byte before.

int receive ( )

Deprecated:: Receives an arrived ethernet packet.

Receiving an ethernet packet will drop the last received ethernet packet and make a new ethernet packet ready to read. If no ethernet packet is arrived it will return 0.

Returns: 0 if no ethernet packet is arrived, or the size of the arrived packet.

int send ( )

Deprecated:: Send an outgoing ethernet packet.

After filling in the data in an ethernet packet it must be send. Send will provide a new packet to write to.

Returns: 0 if the sending was failed, or the size of the packet successfully sent.

void set_link ( Mode mode )

Deprecated:: Sets the speed and duplex parameters of an ethernet link

AutoNegotiate Auto negotiate speed and duplex
HalfDuplex10 10 Mbit, half duplex
FullDuplex10 10 Mbit, full duplex
HalfDuplex100 100 Mbit, half duplex
FullDuplex100 100 Mbit, full duplex

Parameters

mode the speed and duplex mode to set the link to:

int write	(	const char *	data,
		int	size
	)

Deprecated:: Writes into an outgoing ethernet packet.

It will append size bytes of data to the previously written bytes.

Parameters

data	An array to write.
size	The size of data.

Returns: The number of written bytes.

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Important Information for this Arm website