Mistake on this page?
Report an issue in GitHub or email us
Public Types | Public Member Functions
DTLSSocket Class Reference

DTLSSocket implement DTLS stream over UDP Socket. More...

#include <DTLSSocket.h>

Inheritance diagram for DTLSSocket:
DTLSSocketWrapper TLSSocketWrapper Socket

Public Types

Public Member Functions

 DTLSSocket ()
 Create an uninitialized DTLS socket. More...
 
virtual ~DTLSSocket ()
 Destroy the DTLSSocket and closes the transport. More...
 
template<typename S >
 DTLSSocket (S *stack, const char *hostname=NULL)
 Create a socket on a network interface. More...
 
virtual nsapi_error_t open (NetworkStack *stack)
 Opens a socket. More...
 
nsapi_error_t connect (const char *host, uint16_t port)
 Connects TCP socket to a remote host. More...
 
void set_hostname (const char *hostname)
 Set hostname. More...
 
nsapi_error_t set_root_ca_cert (const void *root_ca, size_t len)
 Sets the certification of Root CA. More...
 
nsapi_error_t set_root_ca_cert (const char *root_ca_pem)
 Sets the certification of Root CA. More...
 
nsapi_error_t set_client_cert_key (const void *client_cert, size_t client_cert_len, const void *client_private_key_pem, size_t client_private_key_len)
 Sets client certificate, and client private key. More...
 
nsapi_error_t set_client_cert_key (const char *client_cert_pem, const char *client_private_key_pem)
 Sets client certificate, and client private key. More...
 
virtual nsapi_error_t send (const void *data, nsapi_size_t size)
 Send data over a TLS socket. More...
 
virtual nsapi_size_or_error_t recv (void *data, nsapi_size_t size)
 Receive data over a TLS socket. More...
 
virtual nsapi_error_t close ()
 Closes the socket. More...
 
virtual nsapi_error_t connect (const SocketAddress &address=SocketAddress())
 Connects socket to a remote address. More...
 
virtual nsapi_size_or_error_t sendto (const SocketAddress &address, const void *data, nsapi_size_t size)
 Send a message on a socket. More...
 
virtual nsapi_size_or_error_t recvfrom (SocketAddress *address, void *data, nsapi_size_t size)
 Receive a data from a socket. More...
 
virtual nsapi_error_t bind (const SocketAddress &address)
 Bind a specific address to a socket. More...
 
virtual void set_blocking (bool blocking)
 Set blocking or non-blocking mode of the socket. More...
 
virtual void set_timeout (int timeout)
 Set timeout on blocking socket operations. More...
 
virtual void sigio (mbed::Callback< void()> func)
 Register a callback on state change of the socket. More...
 
virtual nsapi_error_t setsockopt (int level, int optname, const void *optval, unsigned optlen)
 Set socket options. More...
 
virtual nsapi_error_t getsockopt (int level, int optname, void *optval, unsigned *optlen)
 Get socket options. More...
 
virtual Socketaccept (nsapi_error_t *error=NULL)
 Accepts a connection on a socket. More...
 
virtual nsapi_error_t listen (int backlog=1)
 Listen for incoming connections. More...
 
virtual nsapi_error_t getpeername (SocketAddress *address)
 Get the remote-end peer associated with this socket. More...
 
mbedtls_x509_crt * get_own_cert ()
 Get own certificate directly from Mbed TLS. More...
 
int set_own_cert (mbedtls_x509_crt *crt)
 Set own certificate directly to Mbed TLS. More...
 
mbedtls_x509_crt * get_ca_chain ()
 Get CA chain structure. More...
 
void set_ca_chain (mbedtls_x509_crt *crt)
 Set CA chain directly to Mbed TLS. More...
 
mbedtls_ssl_config * get_ssl_config ()
 Get internal Mbed TLS configuration structure. More...
 
void set_ssl_config (mbedtls_ssl_config *conf)
 Override Mbed TLS configuration. More...
 
mbedtls_ssl_context * get_ssl_context ()
 Get internal Mbed TLS context structure. More...
 

Detailed Description

DTLSSocket implement DTLS stream over UDP Socket.

This is a helper class that uses DTLSSocketWrapper with internal UDPSocket.

Definition at line 39 of file DTLSSocket.h.

Member Enumeration Documentation

enum control_transport
inherited

Transport modes.

Enumerator
TRANSPORT_KEEP 

Doesn't call connect() or close() on transport socket.

TRANSPORT_CONNECT_AND_CLOSE 

Does call connect() and close() on transport socket.

TRANSPORT_CONNECT 

Does call only connect() on transport socket.

TRANSPORT_CLOSE 

Does call close() on transport socket.

Definition at line 47 of file TLSSocketWrapper.h.

Constructor & Destructor Documentation

Create an uninitialized DTLS socket.

Must call open to initialize the socket on a network stack.

Definition at line 45 of file DTLSSocket.h.

virtual ~DTLSSocket ( )
virtual

Destroy the DTLSSocket and closes the transport.

DTLSSocket ( S *  stack,
const char *  hostname = NULL 
)

Create a socket on a network interface.

Creates and opens a socket on the network stack of the given network interface. If hostname is also given, user is not required to call set_hostname() later.

Parameters
stackNetwork stack as target for socket.
hostnameHostname used for certificate verification.

Definition at line 61 of file DTLSSocket.h.

Member Function Documentation

virtual Socket* accept ( nsapi_error_t error = NULL)
virtualinherited

Accepts a connection on a socket.

The server socket must be bound and set to listen for connections. On a new connection, returns connected network socket to call close() that deallocates the resources. Referencing a returned pointer after a close() call is not allowed and leads to undefined behavior.

By default, accept blocks until incoming connection occurs. If socket is set to non-blocking or times out, error is set to NSAPI_ERROR_WOULD_BLOCK.

Parameters
errorPointer to storage of the error value or NULL.
Returns
Pointer to a socket.

Implements Socket.

virtual nsapi_error_t bind ( const SocketAddress address)
virtualinherited

Bind a specific address to a socket.

Binding a socket specifies the address and port on which to receive data. If the IP address is zeroed, only the port is bound.

Parameters
addressLocal address to bind.
Returns
NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t close ( )
virtualinherited

Closes the socket.

Closes any open connection and deallocates any memory associated with the socket. Called from destructor if socket is not closed.

Returns
NSAPI_ERROR_OK on success, negative error code on failure

Implements Socket.

nsapi_error_t connect ( const char *  host,
uint16_t  port 
)

Connects TCP socket to a remote host.

Initiates a connection to a remote server specified by either a domain name or an IP address and a port.

Parameters
hostHostname of the remote host.
portPort of the remote host.
Returns
0 on success, negative error code on failure.
virtual nsapi_error_t connect ( const SocketAddress address = SocketAddress())
virtualinherited

Connects socket to a remote address.

Attempts to make connection on connection-mode protocol or set or reset the peer address on connectionless protocol.

Connectionless protocols also use the connected address to filter incoming packets for recv() and recvfrom() calls.

To reset the peer address, there must be zero initialized(default constructor) SocketAddress objects in the address parameter.

Note
If connect() fails it is recommended to close the Socket and create a new one before attempting to reconnect.
Parameters
addressThe SocketAddress of the remote peer.
Returns
NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

mbedtls_x509_crt* get_ca_chain ( )
inherited

Get CA chain structure.

Returns
Mbed TLS X509 certificate chain.
mbedtls_x509_crt* get_own_cert ( )
inherited

Get own certificate directly from Mbed TLS.

Returns
Internal Mbed TLS X509 structure.
mbedtls_ssl_config* get_ssl_config ( )
inherited

Get internal Mbed TLS configuration structure.

Returns
Mbed TLS SSL config.
mbedtls_ssl_context* get_ssl_context ( )
inherited

Get internal Mbed TLS context structure.

Returns
SSL context.
virtual nsapi_error_t getpeername ( SocketAddress address)
virtualinherited

Get the remote-end peer associated with this socket.

Copy the remote peer address to a SocketAddress structure pointed by address parameter. Socket must be connected to have a peer address associated.

Parameters
addressPointer to SocketAddress structure.
Returns
NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t getsockopt ( int  level,
int  optname,
void *  optval,
unsigned *  optlen 
)
virtualinherited

Get socket options.

getsockopt() allows an application to retrieve stack-specific options from the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters
levelStack-specific protocol level or nsapi_socket_level_t.
optnameLevel-specific option name.
optvalDestination for option value.
optlenLength of the option value.
Returns
NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t listen ( int  backlog = 1)
virtualinherited

Listen for incoming connections.

Marks the socket as a passive socket that can be used to accept incoming connections.

Parameters
backlogNumber of pending connections that can be queued simultaneously, defaults to 1.
Returns
NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t open ( NetworkStack stack)
virtual

Opens a socket.

Creates a network socket on the network stack of the given network interface. Not needed if stack is passed to the socket's constructor.

Parameters
stackNetwork stack as target for socket.
Returns
0 on success, negative error code on failure.

Definition at line 76 of file DTLSSocket.h.

virtual nsapi_size_or_error_t recv ( void *  data,
nsapi_size_t  size 
)
virtualinherited

Receive data over a TLS socket.

The socket must be connected to a remote host. Returns the number of bytes received into the buffer.

Parameters
dataDestination buffer for data received from the host.
sizeSize of the buffer in bytes.
Returns
Number of received bytes on success, negative error code on failure. If no data is available to be received and the peer has performed an orderly shutdown, recv() returns 0.

Implements Socket.

virtual nsapi_size_or_error_t recvfrom ( SocketAddress address,
void *  data,
nsapi_size_t  size 
)
virtualinherited

Receive a data from a socket.

Receives a data and stores the source address in address if address is not NULL. Returns the number of bytes written into the buffer.

If socket is connected, only packets coming from connected peer address are accepted.

Note
recvfrom() is allowed write to address and data buffers even if error occurs.

By default, recvfrom blocks until a datagram is received. If socket is set to non-blocking or times out with no data, NSAPI_ERROR_WOULD_BLOCK is returned.

Parameters
addressDestination for the source address or NULL
dataDestination buffer for datagram received from the host
sizeSize of the buffer in bytes
Returns
Number of received bytes on success, negative error code on failure

Implements Socket.

virtual nsapi_error_t send ( const void *  data,
nsapi_size_t  size 
)
virtualinherited

Send data over a TLS socket.

The socket must be connected to a remote host. Returns the number of bytes sent from the buffer.

Parameters
dataBuffer of data to send to the host.
sizeSize of the buffer in bytes.
Returns
Number of sent bytes on success, negative error code on failure.

Implements Socket.

virtual nsapi_size_or_error_t sendto ( const SocketAddress address,
const void *  data,
nsapi_size_t  size 
)
virtualinherited

Send a message on a socket.

The sendto() function sends a message through a connection-mode or connectionless-mode socket. If the socket is a connectionless-mode socket, the message is sent to the address specified. If the socket is a connected-mode socket, address is ignored.

By default, sendto blocks until data is sent. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

Parameters
addressRemote address
dataBuffer of data to send to the host
sizeSize of the buffer in bytes
Returns
Number of sent bytes on success, negative error code on failure

Implements Socket.

virtual void set_blocking ( bool  blocking)
virtualinherited

Set blocking or non-blocking mode of the socket.

Initially all sockets are in blocking mode. In non-blocking mode blocking operations such as send/recv/accept return NSAPI_ERROR_WOULD_BLOCK if they cannot continue.

set_blocking(false) is equivalent to set_timeout(0) set_blocking(true) is equivalent to set_timeout(-1)

Parameters
blockingtrue for blocking mode, false for non-blocking mode.

Implements Socket.

void set_ca_chain ( mbedtls_x509_crt *  crt)
inherited

Set CA chain directly to Mbed TLS.

Parameters
crtMbed TLS X509 certificate chain.
nsapi_error_t set_client_cert_key ( const void *  client_cert,
size_t  client_cert_len,
const void *  client_private_key_pem,
size_t  client_private_key_len 
)
inherited

Sets client certificate, and client private key.

Parameters
client_certClient certification in PEM or DER format.
client_cert_lenCertificate size including the terminating null byte for PEM data.
client_private_key_pemClient private key in PEM or DER format.
client_private_key_lenKey size including the terminating null byte for PEM data
Returns
0 on success, negative error code on failure.
nsapi_error_t set_client_cert_key ( const char *  client_cert_pem,
const char *  client_private_key_pem 
)
inherited

Sets client certificate, and client private key.

Parameters
client_cert_pemClient certification in PEM format.
client_private_key_pemClient private key in PEM format.
Returns
0 on success, negative error code on failure.
void set_hostname ( const char *  hostname)
inherited

Set hostname.

TLSSocket requires hostname used to verify the certificate. If hostname is not given in constructor, this function must be used before starting the TLS handshake.

Parameters
hostnameHostname of the remote host, used for certificate checking.
int set_own_cert ( mbedtls_x509_crt *  crt)
inherited

Set own certificate directly to Mbed TLS.

Parameters
crtMbed TLS X509 certificate chain.
Returns
error code from mbedtls_ssl_conf_own_cert().
nsapi_error_t set_root_ca_cert ( const void *  root_ca,
size_t  len 
)
inherited

Sets the certification of Root CA.

Note
Must be called before calling connect()
Parameters
root_caRoot CA Certificate in any Mbed TLS-supported format.
lenLength of certificate (including terminating 0 for PEM).
Returns
0 on success, negative error code on failure.
nsapi_error_t set_root_ca_cert ( const char *  root_ca_pem)
inherited

Sets the certification of Root CA.

Note
Must be called before calling connect()
Parameters
root_ca_pemRoot CA Certificate in PEM format.
void set_ssl_config ( mbedtls_ssl_config *  conf)
inherited

Override Mbed TLS configuration.

Parameters
confMbed TLS SSL configuration structure.
virtual void set_timeout ( int  timeout)
virtualinherited

Set timeout on blocking socket operations.

Initially all sockets have unbounded timeouts. NSAPI_ERROR_WOULD_BLOCK is returned if a blocking operation takes longer than the specified timeout. A timeout of 0 removes the timeout from the socket. A negative value gives the socket an unbounded timeout.

set_timeout(0) is equivalent to set_blocking(false) set_timeout(-1) is equivalent to set_blocking(true)

Parameters
timeoutTimeout in milliseconds

Implements Socket.

virtual nsapi_error_t setsockopt ( int  level,
int  optname,
const void *  optval,
unsigned  optlen 
)
virtualinherited

Set socket options.

setsockopt() allows an application to pass stack-specific options to the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters
levelStack-specific protocol level or nsapi_socket_level_t.
optnameLevel-specific option name.
optvalOption value.
optlenLength of the option value.
Returns
NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual void sigio ( mbed::Callback< void()>  func)
virtualinherited

Register a callback on state change of the socket.

The specified callback is called on state changes, such as when the socket can receive/send/accept successfully and when an error occurs. The callback may also be called spuriously without reason.

The callback may be called in an interrupt context and should not perform expensive operations such as receive/send calls.

Note! This is not intended as a replacement for a poll or attach-like asynchronous API, but rather as a building block for constructing such functionality. The exact timing of the registered function is not guaranteed and susceptible to change.

Parameters
funcFunction to call on state change.

Implements Socket.

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.