Mbed OS Reference | GattClient.h Source File

 /* mbed Microcontroller Library
  * Copyright (c) 2006-2020 ARM Limited
  *
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 
 #ifndef MBED_GATT_CLIENT_H__
 
 #define MBED_GATT_CLIENT_H__
 
 #include "ble/common/CallChainOfFunctionPointersWithContext.h"
 #include "ble/common/blecommon.h"
 
 #include "ble/gatt/GattAttribute.h"
 #include "ble/gatt/ServiceDiscovery.h"
 #include "ble/gatt/CharacteristicDescriptorDiscovery.h"
 #include "ble/gatt/GattCallbackParamTypes.h"
 #include "ble/gatt/DiscoveredService.h"
 #include "ble/gatt/DiscoveredCharacteristic.h"
 
 namespace ble {
 
 #if !defined(DOXYGEN_ONLY)
 namespace impl {
 class GattClient;
 }
 #endif // !defined(DOXYGEN_ONLY)
 
 /**
  * @addtogroup ble
  * @{
  * @addtogroup gatt
  * @{
  * @addtogroup client
  * @{
  */
 
 /**
  * Define procedures required for interacting with a distant GATT server.
  *
  * @par Discovery procedures
  *
  * A GATT server hosts a fixed set of services. These services are a logical
  * composition of characteristics that may be discovered, read, written or also
  * broadcast their state to a connected client. These characteristics may also
  * contain metainformation named characteristic descriptors. A characteristic
  * descriptor may be used to indicate the unit used for a characteristic value,
  * describe in a textual form the characterisic purpose or allow a client to
  * register for notification of updates of the characteristic value.
  *
  * Prior to any interaction with server characteristic, a GATT client
  * discovers the layout of the services and characteristics present on the
  * server.
  *
  * The layout of the descriptors of a characteristic may also be issued to
  * as an extra discovery step.
  *
  * @par Attribute manipulation
  *
  * As a result of the discovery process, the client can start interacting with
  * the characteristic discovered. Depending on the characteristic properties
  * (acquired during discovery), a client can read or write the value of a given
  * characteristic.
  *
  * Mbed BLE abstracts most read and write operations to offer a single API that
  * can be used to read or write characteristics values. Application code does not
  * have to handle the fragmentation/reassembly process necessary if the attribute
  * value to transported cannot fit in a single data packet.
  *
  * @par Server Initiated events
  *
  * If a characteristic has to notify or indicate a property set; then, a client may
  * register to a notification or indication from the characteristic. When the
  * server updates the characteristic value, the server can forward the
  * new value to the registered clients. The notification/indication mechanism
  * prevents polling from the client and therefore minimize the transactions
  * involved between a client and a server.
  *
  * Registration is made by writing the Client Characteristic Configuration
  * Descriptor, which is present in the characteristic if the notify or
  * indicate properties are set. The client discovers that descriptor
  * if it intends to register to server initiated events.
  */
 class GattClient {
 public:
     /**
      * Definition of the general handler of GattClient related events.
      */
     struct EventHandler {
         /**
          * Function invoked when the connections changes the ATT_MTU which controls
          * the maximum size of an attribute that can be read in a single L2CAP packet
          * which might be fragmented across multiple packets.
          *
          * @param connectionHandle The handle of the connection that changed the size.
          * @param attMtuSize
          *
          * @see negotiateAttMtu()
          */
         virtual void onAttMtuChange(
             ble::connection_handle_t connectionHandle,
             uint16_t attMtuSize
         ) {
             (void)connectionHandle;
             (void)attMtuSize;
         }
     protected:
         /**
          * Prevent polymorphic deletion and avoid unnecessary virtual destructor
          * as the GattClient class will never delete the instance it contains.
          */
         ~EventHandler() = default;
     };
 
     /**
      * Assign the event handler implementation that will be used by the
      * module to signal events back to the application.
      *
      * @param handler Application implementation of an EventHandler.
      */
     void setEventHandler(EventHandler *handler);
 
     /**
      * Attribute read event handler.
      *
      * @see GattClient::onDataRead().
      * @deprecated Use the version in global ble namespace.
      */
     typedef FunctionPointerWithContext<const GattReadCallbackParams*>
         ReadCallback_t;
 
     /**
      * Callchain of attribute read event handlers.
      * @deprecated Use the version in global ble namespace.
      */
     typedef CallChainOfFunctionPointersWithContext<const GattReadCallbackParams*>
         ReadCallbackChain_t;
 
     /**
      * GATT write operations.
      */
     enum WriteOp_t {
         /**
          * Write request.
          *
          * It is used to request the server to write the value of an attribute
          * and acknowledge that this has been achieved in a Write Response.
          */
         GATT_OP_WRITE_REQ = 0x01,
 
         /**
          * Write command.
          *
          * It is used to request the server to write the value of an attribute.
          * The server does not acknowledge the status of the operation.
          */
         GATT_OP_WRITE_CMD = 0x02,
 
         /**
          * Signed Write command.
          *
          * It is used to request the server to write the value of an attribute
          * using a signed packet. The server does not acknowledge the status
          * of the operation.
          */
         GATT_OP_SIGNED_WRITE_CMD = 0x03
     };
 
     /**
      * Attribute write event handler.ble::WriteCallback_t
      *
      * @see GattClient::onDataWrite().
      * @deprecated Use the version in global ble namespace.
      */
     typedef FunctionPointerWithContext<const GattWriteCallbackParams*>
         WriteCallback_t;
 
     /**
      * Callchain of attribute write event handlers.
      *
      * @see GattClient::onDataWrite().
      * @deprecated Use the version in global ble namespace.
      */
     typedef CallChainOfFunctionPointersWithContext<const GattWriteCallbackParams*>
         WriteCallbackChain_t;
 
     /**
      * Handle value notification/indication event handler.
      *
      * @see to GattClient::onHVX().
      */
     typedef FunctionPointerWithContext<const GattHVXCallbackParams*>
         HVXCallback_t;
 
     /**
      * Callchain of handle value notification/indication event handlers.
      *
      * @see GattClient::onHVX().
      */
     typedef CallChainOfFunctionPointersWithContext<const GattHVXCallbackParams*>
         HVXCallbackChain_t;
 
     /**
      * Shutdown event handler.
      *
      * @see GattClient::onShutdown().
      */
     typedef FunctionPointerWithContext<const GattClient *>
         GattClientShutdownCallback_t;
 
 
     /**
      * Callchain of shutdown event handlers.
      *
      * @see to GattClient::onShutown().
      */
     typedef CallChainOfFunctionPointersWithContext<const GattClient *>
         GattClientShutdownCallbackChain_t;
 
     /*
      * The following functions are meant to be overridden in the platform
      * specific subclass.
      */
 
     ~GattClient() = default;
 
     /**
      * Launch the service and characteristic discovery procedure of a GATT server
      * peer.
      *
      * The procedure invokes application callbacks for matching services or
      * characteristics. The process ends after all the services and
      * characteristics present on the distant GATT server have been discovered.
      * Termination callbacks registered with onServiceDiscoveryTermination() are
      * invoked to notify the application of the termination of the procedure.
      *
      * Application code can track the status of the procedure by invoking the
      * function isServiceDiscoveryActive(), which returns true if the
      * procedure is ongoing.
      *
      * At any point, application code can prematurely terminate the discovery
      * procedure by calling terminateServiceDiscovery().
      *
      * @param[in] connectionHandle Handle of the connection with the peer GATT
      * server.
      * @param[in] sc Service discovered event handler invoked when a matching
      * service has been discovered. This parameter may be NULL.
      * @param[in] cc Characteristic discovered event handler invoked when a
      * matching characteristic has been found. This parameter may be NULL.
      * @param[in] matchingServiceUUID UUID of the service the caller is
      * interested in. If a service discovered matches this filter, then @p sc is
      * invoked with it. The special value BLE_UUID_UNKNOWN acts as a wildcard,
      * which can be used to discover all services present on the peer GATT
      * server.
      * @param[in] matchingCharacteristicUUIDIn UUID of the characteristic the
      * caller is interested in. If a characteristic discovered matches this
      * filter, then @p cc is  invoked with it. The special value BLE_UUID_UNKNOWN
      * acts as a wildcard, which can be used to discover all services present on
      * the peer GATT server.
      *
      * @par Discovery procedure implementation detail
      *
      * It is recommended to implement several strategies based on the
      * combination of callbacks and filters passed in input to efficiently
      * realize the discovery procedure:
      * - If @p sc and @p cc are NULL, then it is not necessay to initiate any
      * discovery, and the termination handlers can be invoked immediately.
      * - If @p matchingServiceUUID is set, then the GATT discover services by
      * service UUID procedure should be used; otherwise, the GATT discover primary
      * services procedure should be used.
      * - If @p cc is NULL, then the discovery process should end after the discovery
      * of the services.
      *
      * @return BLE_ERROR_NONE if the discovery procedure has been successfully
      * started and an appropriate error otherwise.
      */
     ble_error_t launchServiceDiscovery(
         ble::connection_handle_t connectionHandle,
         ServiceDiscovery::ServiceCallback_t sc = nullptr,
         ServiceDiscovery::CharacteristicCallback_t  cc = nullptr,
         const UUID &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
         const UUID &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)
     );
 
     /**
      * Launch the service discovery procedure of a GATT server peer.
      *
      * The procedure invokes the application callback for matching services.
      * The process ends after all the services present on the distant GATT
      * server have been discovered.
      * Termination callbacks registered with onServiceDiscoveryTermination() are
      * invoked to notify the application of the termination of the procedure.
      *
      * Application code can track the status of the procedure by invoking the
      * function isServiceDiscoveryActive(), which returns true if the
      * procedure is ongoing.
      *
      * At any point, application code can prematurely terminate the discovery
      * procedure by calling terminateServiceDiscovery().
      *
      * @param[in] connectionHandle Handle of the connection with the peer GATT
      * server.
      * @param[in] callback Service discovered event handler invoked when a
      * matching service has been discovered. This parameter may be NULL.
      * @param[in] matchingServiceUUID UUID of the service the caller is
      * interested in. If a service discovered matches this filter, then @p sc is
      * invoked with it. The special value BLE_UUID_UNKNOWN act is a wildcard,
      * which can be used to discover all services present on the peer GATT
      * server.
      *
      * @return BLE_ERROR_NONE if the discovery procedure has been successfully
      * started and an appropriate error otherwise.
      */
     ble_error_t discoverServices(
         ble::connection_handle_t connectionHandle,
         ServiceDiscovery::ServiceCallback_t callback,
         const UUID &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)
     );
 
     /**
      * Launch the service discovery procedure of a GATT server peer.
      *
      * The process ends after all the services present in the attribute range @p
      * startHandle to @p endHandle have been discovered.
      *
      * Termination callbacks registered with onServiceDiscoveryTermination() are
      * invoked to notify the application of the termination of the procedure.
      *
      * Application code can track the status of the procedure by invoking the
      * function isServiceDiscoveryActive(), which returns true if the
      * procedure is ongoing.
      *
      * At any point, application code can prematurely terminate the discovery
      * procedure by calling terminateServiceDiscovery().
      *
      * @param[in] connectionHandle Handle of the connection with the peer GATT
      * server.
      * @param[in] callback Service discovered event handler invoked when a
      * matching service has been discovered. This parameter may be NULL.
      * @param[in] startHandle First attribute handle of the discovery range.
      * @param[in] endHandle end Lasr attribute handle of the discovery range.
      *
      * @return BLE_ERROR_NONE if the discovery procedure has been successfully
      * started and an appropriate error otherwise.
      */
     ble_error_t discoverServices(
         ble::connection_handle_t connectionHandle,
         ServiceDiscovery::ServiceCallback_t callback,
         GattAttribute::Handle_t startHandle,
         GattAttribute::Handle_t endHandle
     );
 
     /**
      * Check if the service discovery procedure is currently active.
      *
      * @return true if service discovery procedure is active and false otherwise.
      */
     bool isServiceDiscoveryActive() const;
 
     /**
      * Terminate all ongoing service discovery procedures.
      *
      * It results in an invocation of the service discovery termination handler
      * registered with onServiceDiscoveryTermination().
      */
     void terminateServiceDiscovery();
 
     /**
      * Initiate the read procedure of an attribute handle.
      *
      * Once the attribute value has been read in its entirety, the process issues
      * an attribute read event and passes it to all events handlers registered
      * by onDataRead.
      *
      * @param[in] connHandle Handle of the connection used to send the read
      * request.
      * @param[in] attributeHandle Handle of the attribute to read data from.
      * @param[in] offset The offset from the start of the attribute value to be
      * read.
      *
      * @return BLE_ERROR_NONE if read procedure successfully started.
      *
      * @par Implementation notes:
      *
      * Reading the attribute value in its entirety may involve sending several
      * GATT requests to the peer. The following algorithm may be used to
      * implement the process:
      *
      * If the offset is equal to 0, then send a read request; otherwise, send a
      * read blob request at the specified offset.
      *
      * While the attribute data in the response are MTU - 1 long:
      *   - Concat the response to the value containing the previous responses.
      *   - Increment the value of the offset by MTU - 1.
      *   - Send a read blob request with the updated offset.
      *
      * Finally, concat the last response with the value containing all the
      * previous responses and forward that value to the event handlers.
      */
     ble_error_t read(
         ble::connection_handle_t connHandle,
         GattAttribute::Handle_t attributeHandle,
         uint16_t offset
     ) const;
 
     /**
      * Initiate a write procedure on an attribute value.
      *
      * If @p cmd is equal to GATT_OP_WRITE_REQ, then the status of the operation
      * is reported to the event handlers registered through onDataWritten().
      *
      * @param[in] cmd Type of the write procedure used. If GATT_OP_WRITE_CMD
      * is set, then value length is not greater than the size of the mtu
      * of connHandle minus three.
      * @param[in] connHandle Handle of the connection used to send the write
      * request or command.
      * @param[in] attributeHandle Handle of the attribute value to write.
      * @param[in] length Number of bytes present in @p value.
      * @param[in] value Data buffer to write to attributeHandle.
      *
      * @return BLE_ERROR_NONE if the write procedure successfully started.
      *
      * @par Implementation notes:
      *
      * If the operation is a write command, then an implementation uses the
      * GATT write without response procedure and an error is returned if
      * the data buffer to write is larger than the size of the MTU - 3.
      *
      * If the operation is a write command and the size of the data buffer to
      * write is less than than the size of the MTU - 3, then the ATT write request
      * procedure is used, and the response is reported to the handlers
      * listening for write response.
      *
      * Otherwise, the data buffer to write is divided in chunks with a
      * maximum size of MTU - 5. Those chunks are sent sequentially to the
      * peer in ATT prepare write requests. If an error response is received
      * during the process, the procedure ends immediately, the prepared
      * write is discarded and an error is reported to the application handlers.
      * Once all the chunks have been sent, the transaction is completed
      * by sending an execute write request to the peer. The peer response is
      * forwarded to the application handlers.
      */
     ble_error_t write(
         GattClient::WriteOp_t cmd,
         ble::connection_handle_t connHandle,
         GattAttribute::Handle_t attributeHandle,
         size_t length,
         const uint8_t *value
     ) const;
 
     /* Event callback handlers. */
 
     /**
      * Register an attribute read event handler.
      *
      * @note It is possible to unregister a callback using
      * onDataRead().detach(callbackToRemove).
      *
      * @param[in] callback Event handler being registered.
      */
     void onDataRead(ble::ReadCallback_t callback);
 
     /**
      * Get the callchain of attribute read event handlers.
      *
      * @return A reference to the read event callback chain.
      *
      * @note It is possible to register new handlers using
      * onDataRead().add(callback).
      *
      * @note It is possible to unregister an handler by using
      * onDataRead().detach(callback).
      */
     ble::ReadCallbackChain_t& onDataRead();
 
     /**
      * Register an attribute write event handler.
      *
      * @param[in] callback Event handler being registered.
      *
      * @note It is possible to remove registered handlers using
      * onDataWritten().detach(callbackToRemove).
      *
      * @note Write commands (issued using writeWoResponse) don't generate a
      * response.
      */
     void onDataWritten(ble::WriteCallback_t callback);
 
     /**
      * Get the callchain of attribute write event handlers.
      *
      * @return A reference to the data written callbacks chain.
      *
      * @note It is possible to register new handlers by using
      * onDataWritten().add(callback).
      *
      * @note It is possible to unregister an handler by using
      * onDataWritten().detach(callback).
      */
     ble::WriteCallbackChain_t& onDataWritten();
 
     /**
      * Register a service discovery termination event handler.
      *
      * @param[in] callback Event handler being registered.
      */
     void onServiceDiscoveryTermination(
         ServiceDiscovery::TerminationCallback_t callback
     );
 
     /**
      * Initiate the descriptor discovery procedure for a given characteristic.
      *
      * When a descriptor is discovered the discovered descriptor is forwarded
      * to @p discoveryCallback. After the discovery of all the descriptors, the
      * procedure ends and send a descriptor discovery termination event to @p
      * termination callback.
      *
      * Application code may monitor the discovery process by querying its status
      * with isCharacteristicDescriptorDiscoveryActive(). It can also end the
      * discovery process by calling terminateCharacteristicDescriptorDiscovery().
      *
      * @param[in] characteristic The characteristic owning the descriptors to
      * discover.
      * @param[in] discoveryCallback Handle descriptor discovered events for the
      * duration of the procedure.
      * @param[in] terminationCallback Handle descriptor discovery termination
      * event of the procedure.
      *
      * @return BLE_ERROR_NONE if the characteristic descriptor discovery
      * procedure has been launched successfully otherwise an appropriate error.
      */
     ble_error_t discoverCharacteristicDescriptors(
         const DiscoveredCharacteristic& characteristic,
         const CharacteristicDescriptorDiscovery::DiscoveryCallback_t& discoveryCallback,
         const CharacteristicDescriptorDiscovery::TerminationCallback_t& terminationCallback
     );
 
     /**
      * Query status of the descriptor discovery procedure for a given
      * characteristic.
      *
      * @param[in] characteristic The characteristic concerned by the descriptors
      * discovery.
      *
      * @return true if a descriptors discovery is active for the characteristic
      * in input otherwise false.
      */
     bool isCharacteristicDescriptorDiscoveryActive(
         const DiscoveredCharacteristic& characteristic
     ) const;
 
     /**
      * @brief Terminate an ongoing characteristic descriptor discovery procedure.
      *
      * If the procedure is active, then it ends, and the termination handler
      * associated with the procedure is called.
      *
      * @param[in] characteristic The characteristic containing the descriptors
      * being discovered.
      */
     void terminateCharacteristicDescriptorDiscovery(
         const DiscoveredCharacteristic& characteristic
     );
 
     /**
      * Trigger MTU negotiation. This might result in a Gap event onAttMtuChange
      * being called if MTU changes.
      *
      * @note This does not guarantee a change in MTU size. If size remains
      * unchanged no event will be generated.
      *
      * @param connection Connection on which the MTU is to be negotiated.
      *
      * @return BLE_ERROR_NONE if the procedure has been launched successfully
      * otherwise an appropriate error.
      */
     ble_error_t negotiateAttMtu(ble::connection_handle_t connection);
 
     /**
      * Register an handler for Handle Value Notification/Indication events.
      *
      * @param callback Event handler to register.
      *
      * @note It is possible to unregister a callback by using
      * onHVX().detach(callbackToRemove).
      */
     void onHVX(HVXCallback_t callback);
 
     /**
      * Register a shutdown event handler.
      *
      * The registered handler is invoked when the GattClient instance is
      * about to be shut down.
      *
      * @param[in] callback Event handler to invoke when a shutdown event is
      * available.
      *
      * @note onShutdown().detach(callback) may be used to unregister a given
      * callback.
      *
      * @see BLE::shutdown()
      */
     void onShutdown(const GattClientShutdownCallback_t& callback);
 
     /**
      * Register a shutdown event handler.
      *
      * The registered handler is invoked when the GattClient instance is
      * about to be shut down.
      *
      * @param[in] objPtr Instance that will be used to invoke @p memberPtr.
      * @param[in] memberPtr Event handler to invoke when a shutdown event is
      * available.
      */
     template <typename T>
     void onShutdown(T *objPtr, void (T::*memberPtr)(const GattClient *))
     {
         onShutdown({objPtr, memberPtr});
     }
 
     /**
      * Get the callchain of shutdown event handlers.
      *
      * @return A reference to the shutdown event callbacks chain.
      *
      * @note onShutdown().add(callback) may be used to register new handlers.
      *
      * @note onShutdown().detach(callback) may be used to unregister an handler.
      */
     GattClientShutdownCallbackChain_t& onShutdown();
 
     /**
      * @brief provide access to the callchain of HVX callbacks.
      *
      * @return A reference to the HVX callbacks chain.
      *
      * @note It is possible to register callbacks using onHVX().add(callback).
      *
      * @note It is possible to unregister callbacks using onHVX().detach(callback).
      */
     HVXCallbackChain_t& onHVX();
 
     /**
      * Reset the state of the GattClient instance.
      *
      * Prior to any state modification, shutdown event handlers are notified
      * that the GattClient instance is about to be shut down. Then, running
      * procedures end. Finally, the state of the instance is reset.
      *
      * @par implementation note
      *
      * This function is meant to be overridden in the platform-specific
      * subclass. Nevertheless, the subclass only resets its
      * state and not the data held in GattClient members. This is achieved
      * by a call to GattClient::reset() from the subclass' reset()
      * implementation.
      *
      * @return BLE_ERROR_NONE on success.
      */
     ble_error_t reset();
 
     /* Entry points for the underlying stack to report events back to the user. */
 
     /**
      * Forward an attribute read event to all registered handlers.
      *
      * @attention This function is meant to be called from the vendor
      * implementation when an attribute read event occurs.
      *
      * @param[in] params Attribute read event to pass to the registered handlers.
      */
     void processReadResponse(const GattReadCallbackParams *params);
 
     /**
      * Forward an attribute written event to all registered handlers.
      *
      * @attention This function is meant to be called from the vendor
      * implementation when an attribute written event occurs.
      *
      * @param[in] params Attribute written event to pass to the registered
      * handlers.
      */
     void processWriteResponse(const GattWriteCallbackParams *params);
 
     /**
      * Forward a handle value notification or indication event to all registered
      * handlers.
      *
      * @attention This function is meant to be called from the vendor
      * implementation when a notification or indication event is available.
      *
      * @param[in] params Notification or Indication event to pass to the
      * registered handlers.
      */
     void processHVXEvent(const GattHVXCallbackParams *params);
 
 #if !defined(DOXYGEN_ONLY)
     GattClient(impl::GattClient* impl) : impl(impl) { }
     GattClient(const GattClient&) = delete;
     GattClient& operator=(const GattClient&) = delete;
 #endif // !defined(DOXYGEN_ONLY)
 
 private:
     impl::GattClient *impl;
 };
 
 /**
  * @}
  * @}
  * @}
  */
 
 } // namespace ble
 
 /** @deprecated Use the namespaced ble::GattClient instead of the global GattClient. */
 using ble::GattClient;
 
 #endif /* ifndef MBED_GATT_CLIENT_H__ */
Important Information for this Arm website
