Mbed OS Reference | ATCmdParser.h Source File

 /* Copyright (c) 2017-2019 ARM Limited
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  * @section DESCRIPTION
  *
  * Parser for the AT command syntax
  *
  */
 #ifndef MBED_ATCMDPARSER_H
 #define MBED_ATCMDPARSER_H
 
 #include <cstdarg>
 #include "platform/Callback.h"
 #include "platform/NonCopyable.h"
 #include "platform/FileHandle.h"
 
 namespace mbed {
 /** \addtogroup platform-public-api Platform */
 /** @{*/
 /**
  * \defgroup platform_ATCmdParser ATCmdParser class
  * @{
  */
 
 /**
  * Parser class for parsing AT commands
  *
  * Here are some examples:
  * @code
  * UARTSerial serial = UARTSerial(D1, D0);
  * ATCmdParser at = ATCmdParser(&serial, "\r\n");
  * int value;
  * char buffer[100];
  *
  * at.send("AT") && at.recv("OK");
  * at.send("AT+CWMODE=%d", 3) && at.recv("OK");
  * at.send("AT+CWMODE?") && at.recv("+CWMODE:%d\r\nOK", &value);
  * at.recv("+IPD,%d:", &value);
  * at.read(buffer, value);
  * at.recv("OK");
  * @endcode
  */
 
 class ATCmdParser : private NonCopyable<ATCmdParser> {
 private:
     // File handle
     // Not owned by ATCmdParser
     FileHandle *_fh;
 
     int _buffer_size;
     char *_buffer;
     int _timeout;
 
     // Parsing information
     const char *_output_delimiter;
     int _output_delim_size;
     int _oob_cb_count;
     char _in_prev;
     bool _dbg_on;
     bool _aborted;
 
     struct oob {
         unsigned len;
         const char *prefix;
         mbed::Callback<void()> cb;
         oob *next;
     };
     oob *_oobs;
 
 public:
 
     /**
      * Constructor
      *
      * @param fh A FileHandle to the digital interface, used for AT commands
      * @param output_delimiter End of command-line termination
      * @param buffer_size Size of internal buffer for transaction
      * @param timeout Timeout of the connection
      * @param debug Turns on/off debug output for AT commands
      */
     ATCmdParser(FileHandle *fh, const char *output_delimiter = "\r",
                 int buffer_size = 256, int timeout = 8000, bool debug = false)
         : _fh(fh), _buffer_size(buffer_size), _oob_cb_count(0), _in_prev(0), _aborted(false), _oobs(NULL)
     {
         _buffer = new char[buffer_size];
         set_timeout(timeout);
         set_delimiter(output_delimiter);
         debug_on(debug);
     }
 
     /**
      * Destructor
      */
     ~ATCmdParser()
     {
         while (_oobs) {
             struct oob *oob = _oobs;
             _oobs = oob->next;
             delete oob;
         }
         delete[] _buffer;
     }
 
     /**
      * Allows timeout to be changed between commands
      *
      * @param timeout ATCmdParser APIs (read/write/send/recv ..etc) throw an
      *                error if no response is received in `timeout` duration
      */
     void set_timeout(int timeout)
     {
         _timeout = timeout;
     }
 
     /**
      * For backward compatibility.
      * @deprecated Do not use this function. This function has been replaced with set_timeout for consistency.
      *
      * Please use set_timeout(int) API only from now on.
      * Allows timeout to be changed between commands
      *
      * @param timeout ATCmdParser APIs (read/write/send/recv ..etc) throw an
      *                error if no response is received in `timeout` duration
      *
      */
     MBED_DEPRECATED_SINCE("mbed-os-5.5.0", "Replaced with set_timeout for consistency")
     void setTimeout(int timeout)
     {
         set_timeout(timeout);
     }
 
     /**
      * Sets string of characters to use as line delimiters
      *
      * @param output_delimiter String of characters to use as line delimiters
      */
     void set_delimiter(const char *output_delimiter)
     {
         _output_delimiter = output_delimiter;
         _output_delim_size = strlen(output_delimiter);
     }
 
     /**
      * For backwards compatibility.
      * @deprecated Do not use this function. This function has been replaced with set_delimiter for consistency.
      *
      * Please use set_delimiter(const char *) API only from now on.
      * Sets string of characters to use as line delimiters
      *
      * @param output_delimiter string of characters to use as line delimiters
      */
     MBED_DEPRECATED_SINCE("mbed-os-5.5.0", "Replaced with set_delimiter for consistency")
     void setDelimiter(const char *output_delimiter)
     {
         set_delimiter(output_delimiter);
     }
 
     /**
      * Allows traces from modem to be turned on or off
      *
      * @param on Set as 1 to turn on traces and 0 to disable traces.
      */
     void debug_on(uint8_t on)
     {
         _dbg_on = (on) ? 1 : 0;
     }
 
     /**
      * For backward compatibility.
      * @deprecated Do not use this function. This function has been replaced with debug_on for consistency.
      *
      * Allows traces from modem to be turned on or off
      *
      * @param on Set as 1 to turn on traces and 0 to disable traces.
      */
     MBED_DEPRECATED_SINCE("mbed-os-5.5.0", "Replaced with debug_on for consistency")
     void debugOn(uint8_t on)
     {
         debug_on(on);
     }
 
     /**
      * Sends an AT command
      *
      * Sends a formatted command using printf style formatting
      * @see printf
      *
      * @param command printf-like format string of command to send which
      *                is appended with a newline
      * @param ... all printf-like arguments to insert into command
      * @return true only if command is successfully sent
      */
     bool send(const char *command, ...) MBED_PRINTF_METHOD(1, 2);
 
     bool vsend(const char *command, std::va_list args);
 
     /**
      * Receive an AT response
      *
      * Receives a formatted response using scanf style formatting
      * @see scanf
      *
      * Responses are parsed line at a time.
      * Any received data that does not match the response is ignored until
      * a timeout occurs.
      *
      * @param response scanf-like format string of response to expect
      * @param ... all scanf-like arguments to extract from response
      * @return true only if response is successfully matched
      */
     bool recv(const char *response, ...) MBED_SCANF_METHOD(1, 2);
 
     bool vrecv(const char *response, std::va_list args);
 
     /**
      * Write a single byte to the underlying stream
      *
      * @param c The byte to write
      * @return The byte that was written or -1 during a timeout
      */
     int putc(char c);
 
     /**
      * Get a single byte from the underlying stream
      *
      * @return The byte that was read or -1 during a timeout
      */
     int getc();
 
     /**
      * Write an array of bytes to the underlying stream
      *
      * @param data The array of bytes to write
      * @param size Number of bytes to write
      * @return number of bytes written or -1 on failure
      */
     int write(const char *data, int size);
 
     /**
      * Read an array of bytes from the underlying stream
      *
      * @param data The buffer for filling the read bytes
      * @param size Number of bytes to read
      * @return number of bytes read or -1 on failure
      */
     int read(char *data, int size);
 
     /**
      * Direct printf to underlying stream
      * @see printf
      *
      * @param format Format string to pass to printf
      * @param ... Variable arguments to printf
      * @return number of bytes written or -1 on failure
      */
     int printf(const char *format, ...) MBED_PRINTF_METHOD(1, 2);
 
     int vprintf(const char *format, std::va_list args);
 
     /**
      * Direct scanf on underlying stream
      * This function does not itself match whitespace in its format string, so \n is not significant to it.
      * It should be used only when certain string is needed or format ends with certain character, otherwise
      * it will fill the output with one character.
      * @see scanf
      *
      * @param format Format string to pass to scanf
      * @param ... Variable arguments to scanf
      * @return number of bytes read or -1 on failure
      */
     int scanf(const char *format, ...) MBED_SCANF_METHOD(1, 2);
 
     int vscanf(const char *format, std::va_list args);
 
     /**
      * Attach a callback for out-of-band data
      *
      * @param prefix String on when to initiate callback
      * @param func Callback to call when string is read
      * @note out-of-band data is only processed during a scanf call
      */
     void oob(const char *prefix, mbed::Callback<void()> func);
 
     /**
      * Flushes the underlying stream
      */
     void flush();
 
     /**
      * Abort current recv
      *
      * Can be called from out-of-band handler to interrupt the current
      * recv operation.
      */
     void abort();
 
     /**
     * Process out-of-band data
     *
     * Process out-of-band data in the receive buffer. This function
     * returns immediately if there is no data to process.
     *
     * @return true if out-of-band data processed, false otherwise
     */
     bool process_oob(void);
 };
 
 /**@}*/
 
 /**@}*/
 
 } //namespace mbed
 
 #endif //MBED_ATCMDPARSER_H
Important Information for this Arm website
