Diff: main.cpp

Revision:

11:e761fe51a7b9

Parent:

10:1f5e78dd4a7c

--- a/main.cpp	Wed Feb 08 00:50:27 2017 +0000
+++ b/main.cpp	Mon Feb 25 21:08:35 2019 +0000
@@ -1,113 +1,33 @@
-/**********************************************************************
-* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
-*
-* Permission is hereby granted, free of charge, to any person obtaining a
-* copy of this software and associated documentation files (the "Software"),
-* to deal in the Software without restriction, including without limitation
-* the rights to use, copy, modify, merge, publish, distribute, sublicense,
-* and/or sell copies of the Software, and to permit persons to whom the
-* Software is furnished to do so, subject to the following conditions:
-*
-* The above copyright notice and this permission notice shall be included
-* in all copies or substantial portions of the Software.
-*
-* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
-* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-* OTHER DEALINGS IN THE SOFTWARE.
-*
-* Except as contained in this notice, the name of Maxim Integrated
-* Products, Inc. shall not be used except as stated in the Maxim Integrated
-* Products, Inc. Branding Policy.
-*
-* The mere transfer of this software does not imply any licenses
-* of trade secrets, proprietary technology, copyrights, patents,
-* trademarks, maskwork rights, or any other form of intellectual
-* property whatsoever. Maxim Integrated Products, Inc. retains all
-* ownership rights.
-**********************************************************************/
+#include "mbed.h"
+Serial bluetooth(D8, D2); // RX TX
+DigitalIn bottone(D6);
+DigitalIn bottone2(D7);
+Serial pc(USBTX, USBRX);
 
-#include "mbed.h"
-#include "max32630fthr.h"
-#include "Adafruit_SSD1306.h"
-#include "USBSerial.h"
-
-MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
-
-I2C i2c(P3_4, P3_5); // SDA, SCL
-
-// Hardware serial port over DAPLink
-Serial daplink(P2_1, P2_0);
-
-// Virtual serial port over USB
-USBSerial microUSB;
-
-DigitalOut rLED(LED1);
-DigitalOut gLED(LED2);
-DigitalOut bLED(LED3);
-
-DigitalIn aButton(P5_3, PullUp);
-DigitalIn bButton(P3_3, PullUp);
-DigitalIn cButton(P3_2, PullUp);
-
-/* Analog inputs 0 and 1 have internal dividers to allow measuring 5V signals  
- * The dividers are selected by using inputs AIN_5 and AIN_5 respectively.
- * The full scale range for AIN0-3 is 1.2V
- * The full scale range for AIN4-5 is 6.0V
- */
-AnalogIn ain0(AIN_4); 
-AnalogIn ain1(AIN_5); 
-AnalogIn ain2(AIN_2); 
-AnalogIn ain3(AIN_3);
-
-
-// main() runs in its own thread in the OS
-// (note the calls to Thread::wait below for delays)
 int main()
 {
-    int c;
-    c = ' ';
-
-    daplink.printf("daplink serial port\r\n");
-    microUSB.printf("micro USB serial port\r\n");
-    rLED = LED_ON;
-    gLED = LED_ON;
-    bLED = LED_OFF;
-
-
-    Thread::wait(50);  // Give the supplies time to settle before initializing the display
-    Adafruit_SSD1306_I2c featherOLED(i2c);  
-    featherOLED.printf("%ux%u OLED Display\r\n", featherOLED.width(), featherOLED.height());
-    featherOLED.printf("HelloWorld \r");
-    featherOLED.display();
-
+  pc.baud(9200);/*CAMBIAMO IL BOUND RATE DELLA NOSTRA TRASMISSIONE DEVE ESSERE SETTATO ANCHE SU PUTTYSE NON C'è QUESTO CODICE USA QUELLO DI DEFAULT*/
+  bluetooth.baud(38400);
 
     while(1) {
-        Thread::wait(250);
-        if (microUSB.readable()) {
-            c = microUSB.getc();
-            microUSB.putc(c);
-            daplink.putc(c);
-        }
-        if (daplink.readable()) {
-            c = daplink.getc();
-            microUSB.putc(c);
-            daplink.putc(c);
+     while (bluetooth.writeable())
+    {
+        bottone.mode(PullUp);
+        bottone2.mode(PullUp);
+        if (bottone==0){
+            pc.printf("porta!\r\n");
+            bluetooth.putc('D');
         }
-        rLED = aButton;
-        gLED = bButton;
-        bLED = cButton;
-        featherOLED.clearDisplay();
-        featherOLED.setTextCursor(0,0);
-        featherOLED.printf("MAX32630FTHR OLED\n");
-        featherOLED.printf("AIN0/1: %1.2f, %1.2f\n", (6.0f * ain0), (6.0f * ain1) );  // analog inputs 0,1
-        featherOLED.printf("AIN2/3: %1.2f, %1.2f\n", (1.2f * ain2), (1.2f * ain3) );  // analog inputs 2,3
-        featherOLED.printf("UART:%c  A:%d  B:%d  C:%d\n", c, aButton.read(), bButton.read(), cButton.read());  // UART and Buttons
-        featherOLED.display();
+        if (bottone2==0){
+            pc.printf("Portoncino !\r\n");
+            bluetooth.putc('P');
+        }
+        
+        if (bottone==1 && bottone2==1){
+            pc.printf("Cancella tutto\r\n");
+            bluetooth.putc('Z');
+        }
 
     }
-}
-
+ }
+}
\ No newline at end of file