x_nucleo_iks01a3_targets.h

00001 /**
00002   ******************************************************************************
00003   * @file    x_nucleo_iks01a3_targets.h
00004   * @author  SRA
00005   * @version V1.0.0
00006   * @date    5-March-2019
00007   * @brief   This header file is intended to manage the differences between
00008   *          the different supported base-boards which might mount the
00009   *          X_NUCLEO_IKS01A3 MEMS Inertial & Environmental Nucleo Expansion Board.
00010   ******************************************************************************
00011   * @attention
00012   *
00013   * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
00014   *
00015   * Redistribution and use in source and binary forms, with or without modification,
00016   * are permitted provided that the following conditions are met:
00017   *   1. Redistributions of source code must retain the above copyright notice,
00018   *      this list of conditions and the following disclaimer.
00019   *   2. Redistributions in binary form must reproduce the above copyright notice,
00020   *      this list of conditions and the following disclaimer in the documentation
00021   *      and/or other materials provided with the distribution.
00022   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00023   *      may be used to endorse or promote products derived from this software
00024   *      without specific prior written permission.
00025   *
00026   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00027   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00028   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00029   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00030   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00031   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00032   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00033   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00034   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00035   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00036   *
00037   ******************************************************************************
00038   */
00039 
00040 /* Define to prevent from recursive inclusion --------------------------------*/
00041 #ifndef _X_NUCLEO_IKS01A3_TARGETS_H_
00042 #define _X_NUCLEO_IKS01A3_TARGETS_H_
00043 
00044 /*** I2C ***/
00045 /* Use Arduino I2C Connectors */
00046 #define IKS01A3_PIN_I2C_SDA         (D14)
00047 #define IKS01A3_PIN_I2C_SCL         (D15)
00048 
00049 /* LSM6DSO INT1 */
00050 #define IKS01A3_PIN_LSM6DSO_INT1     (D4)
00051 /* LSM6DSO INT2 */
00052 #define IKS01A3_PIN_LSM6DSO_INT2     (D5)
00053 /* LIS2DW12 INT1 */
00054 #define IKS01A3_PIN_LIS2DW12_INT1    (A3)
00055 /* LPS22HH INT */
00056 #define IKS01A3_PIN_LPS22HH_INT      (D6)
00057 /* STTS751 INT */
00058 #define IKS01A3_PIN_STTS751_INT      (A4)
00059 
00060 #endif // _X_NUCLEO_IKS01A3_TARGETS_H_